Sequence determinants of a transmembrane proton channel: an inverse relationship between stability and function

The driving forces behind the folding processes of integral membrane proteins after insertion into the bilayer, is currently under debate. The M2 protein from the influenza A virus is an ideal system to study lateral association of transmembrane helices. Its proton selective channel is essential for virus functioning and a target of the drug amantadine. A 25 residue transmembrane fragment of M2, M2TM, forms a four-helix bundle in vivo and in various detergents and phospholipid bilayers. Presented here are the energetic consequences for mutations made to the helix/helix interfaces of the M2TM tetramer. Analytical ultracentrifugation has been used to determine the effect of ten single-site mutations, to either alanine or phenylalanine, on the oligomeric state and the free energy of M2TM in the absence and the presence of amantadine. It was expected that many of these mutations would perturb the M2TM stability and tetrameric integrity. Interestingly, none of the mutations destabilize tetramerization. This finding suggests that M2 sacrifices stability to preserve its functions, which require rapid and specific interchange between distinct conformations involved in gating and proton conduction. Mutations might therefore restrict the full range of conformations by stabilizing a given native or non-native conformational state. In order to assess one specific conformation of the tetramer, we measured the binding of amantadine to the resting state of the channel, and examined the overall free energy of assembly of the amantadine bound tetramer. All of the mutations destabilized amantadine binding or were isoenergetic. We also find that large to small residue changes destabilize the amantadine bound tetramer whereas mutations to side-chains of similar volume stabilize this conformation. A structural model of the amantadine bound state of M2TM was generated using a novel protocol that optimizes a structure for an ensemble of neutral and disruptive mutations. The model structure is consistent with the mutational data.     

Island colonization and founder effects: the invasion of the Guadeloupe islands by ship rats (Rattus rattus)

The stepwise colonization of islands within an archipelago is typically punctuated by successive founder effects, with each newly founded population being a subsample of the gene pool of the source island. Thus, the genetic signature of successive bottlenecks should be detected when analysing the genetic structure between islands of an archipelago. To test this prediction, we investigated introduced ship rat populations, Rattus rattus (Linnaeus, 1758), in the Guadeloupe Archipelago. Three different methods, commonly named the heterozygosity excess, the mode-shift indicator and the M ratio method, were used to detect bottlenecks from genetic data obtained with eight microsatellite markers on Guadeloupe and two neighbouring islands, Petite-Terre and Fajou. Moreover, a recent eradication failure on Fajou allowed us to test the accuracy of the methods in an 'experimental-like' situation. The results indicate that rats were introduced on Guadeloupe first, which then became the source population for independent secondary colonization of Fajou and Petite-Terre. Moreover, the heterozygosity excess and the mode-shift indicator only detected bottlenecks for the recent colonization of Petite-Terre and the eradication failure on Fajou. However, bottlenecks were detected for all the populations using the M ratio method. This could be interpreted as the remaining signature of the early introduction of the ship rat in the archipelago.     

Process analytical technology case study,part III: Calibration monitoring and transfer

This is the third of a series of articles detailing the development of near-infrared spectroscopy methods for solid dosage form analysis. Experiments were conducted at the Duquesne University Center for Pharmaceutical Technology to develop a system for continuous calibration monitoring and formulate an appropriate strategy for calibration transfer. Indcators of high-flux noise (noise factor level) and wave-length uncertainty were developed. These measurements, in combination with Hotelling’s T² and Q residual, are used to continuously monitor instrument performance and model relevance. Four calibration transfer techniques were compared. Three established techniques, finite impulse response filtering, generalized least squares weighting, and piecewise direct standardization were evaluated. A fourth technique, baseline subtraction, was the most effective for calibration transfer. Using as few as 15 transfer samples, predictive capability of the analytical method was maintained across multiple instruments and major instrument maintenance.     

The effects of controlled propagation on an endangered species: genetic differentiation and divergence in body size among native and captive populations of the Socorro Isopod (Crustacea: Flabellifera)

The endangered Socorro Isopod, Thermosphaeroma thermophilum, is endemic to a single thermal spring in Socorro, NM. This species is cannibalistic, with males more cannibalistic than females, and with females and juveniles more vulnerable than males as prey. In 1990, the New Mexico Department of Game and Fish, created the Socorro Isopod Propagation Facility (SIPF) near the natural habitat, Sedillo Spring (SS), to increase total population size and to examine the effects of habitat heterogeneity on population growth. We report the genetic and morphological effects of this experiment, using the natural population as a control. Captive subpopulations experienced bottlenecks of known intensity and duration, as well as different intensities of cannibalism. Using 57 AFLP markers, we show that in 6 years (1990–1996), captive subpopulations diverged significantly from the natural population. Also during this 6-year period, body lengths of captive isopods diverged nearly 2-fold from the natural population, evidently because cannibalism and thus selection favoring large size was more intense in captive subpopulations than in nature. This hypothesis is supported by the fact that cannibalism and the apparent response to selection on body size became variable among captive subpopulations when physical structure was added to three of the four SIPF pools in April 1997. As expected if cannibalism was the source of selection for large body size, by August 1998 (15 months = 7–8 generations), the rate at which body size increased became inversely proportional to the amount of physical structure within pools. Although we are unable to separate the specific effects of population subdivision and cannibalism, our results show that these conditions in combination caused rapid changes in genetic variation and the external morphology of these captive subpopulations. Our results have important implications for future attempts to manage and propagate endangered species.     

Analytical precision,biological variation,and mathematical normalization in high data density metabolomics

Metabolic serotypes sensitive to caloric intake may enable sera metabolomic profiles to validate epidemiological parameters and predict disease risk in humans. This long-range goal is complicated by the lack of known state markers and the requirement for simultaneous monitoring of multiple small changes. Therefore, analytical precision for appropriate high data density studies using HPLC separations coupled with coulometric array detectors was evaluated over a two month period in pooled rat sera samples (previously collected and stored at –80 °C), and in authentic biochemical standards. In sera, mean coefficients of variation (CV) of retention time and ratio accuracy within the established metabolic serotype varied within ±1% and ±3%, respectively. In sets of purified standards, the same parameters fluctuated, correspondently, in ranges of ±0.1% and ±1%. Median CV of the metabolite concentrations were ~13% in standards and ~11–19% in sera, and varied non-monotonically with the analytical system status and experimental design. These parameters were shown to be sufficiently controlled so as not to dominate intra-group biological variability in serum metabolomics studies. Continuation of experimental runs across an analytical breakpoint (column replacement) was associated with disproportionate changes in metabolite concentrations, independent of maintained analytical precision. These changes were sufficient to shift overall profile localization in megavariate projection analyses. We developed a mathematical approach to normalize this break and use partial least squares projection to latent structure discriminant analysis to confirm validity of this normalization approach. This generally applicable mathematical correction helps enable longer term high data density studies by removing a critical source of systemic variation.     

Negative effect of genetic bottlenecks on the adaptability of vesicular stomatitis virus

Muller's ratchet is a principle of evolutionary genetics describing mutant accumulation in populations that are repeatedly subjected to genetic bottleneck. The immediate effect of Muller's ratchet, overall loss of fitness, has been confirmed in several viral systems belonging to different groups. This report shows that in addition to fitness loss, genetic bottlenecks also have longer-term effects, namely changes in the capacity of viral populations to adapt. Thus, vesicular stomatitis virus strains with a history of genetic bottleneck have lower adaptability than strains maintained at relatively large population sizes. This lower adaptability is illustrated by their reduced ability to regain fitness and by their inability to outcompete wild-type populations in situations where the initial fitness of the bottlenecked mutant is the same or even higher than the initial fitness of the wild-type.     

Analysis of microsatellite variation in Pinus radiata reveals effects of genetic drift but no recent bottlenecks

Most conifer species occur in large continuous populations, but radiata pine, Pinus radiata, occurs only in five disjunctive natural populations in California and Mexico. The Mexican island populations were presumably colonized from the mainland millions of years ago. According to Axelrod (1981), the mainland populations are relicts of an earlier much wider distribution, reduced some 8,000 years ago, whereas according to Millar (1997, 2000), the patchy metapopulation-like structure is typical of the long-term population demography of the species. We used 19 highly polymorphic microsatellite loci to describe population structure and to search for signs of the dynamics of population demography over space and time. Frequencies of null alleles at microsatellite loci were estimated using an approach based on the probability of identity by descent. Microsatellite genetic diversities were high in all populations [expected heterozygosity (H(e)) = 0.68-0.77], but the island populations had significantly lower estimates. Variation between loci in genetic differentiation (F(ST)) was high, but no locus deviated statistically significantly from the rest at an experiment wide level of 0.05. Thus, all loci were included in subsequent analysis. The average differentiation was measured as F(ST) = 0.14 (SD 0.012), comparable with earlier allozyme results. The island populations were more diverged from the other populations and from an inferred common ancestral gene pool than the mainland ones. All populations showed a deficiency of expected heterozygosity given the number of alleles, the mainland populations more so than the island ones. The results thus do not support a recent important contraction in the mainland range of radiata pine.     

Evaluation of manometric temperature measurement (MTM), a process analytical technology tool in freeze drying, part III: Heat and mass transfer measurement

This article evaluates the procedures for determining the vial heat transfer coefficient and the extent of primary drying through manometric temperature measurement (MTM). The vial heat transfer coefficients (K_v) were calculated from the MTM-determined temperature and resistance and compared with K_v values determined by a gravimetric method. The differences between the MTM vial heat transfer coefficients and the gravimetric values are large at low shelf temperature but smaller when higher shelf temperatures were used. The differences also became smaller at higher chamber pressure and smaller when higher resistance materials were being freeze-dried. In all cases, using thermal shields greatly improved the accuracy of the MTM K_v measurement. With use of thermal shields, the thickness of the frozen layer calculated from MTM is in good agreement with values obtained gravimetrically. The heat transfer coefficient “error” is largely a direct result of the error in the dry layer resistance (ie, MTM-determined resistance is too low). This problem can be minimized if thermal shields are used for freeze-drying. With suitable use of thermal shields, accurate K_v values are obtained by MTM; thus allowing accurate calculations of heat and mass flow rates. The extent of primary drying can be monitored by real-time calculation of the amount of remaining ice using MTM data, thus providing a process analytical tool that greatly improves the freeze-drying process design and control.     

Acoustic-resonance spectrometry as a process analytical technology for rapid and accurate tablet identification

This research was performed to test the hypothesis that acoustic-resonance spectrometry (ARS) is able to rapidly and accurately differentiate tablets of similar size and shape. The US Food and Drug Administration frequently orders recalls of tablets because of labeling problems (eg, the wrong tablet appears in a bottle). A high-throughput, nondestructive method of online analysis and label comparison before shipping could obviate the need for recall or disposal of a batch of mislabeled drugs, thus saving a company considerable expense and preventing a major safety risk. ARS is accurate and precise as well as inexpensive and nondestructive, and the sensor, is constructed from readily available parts, suggesting utility as a process analytical technology (PAT). To test the classification ability of ARS, 5 common household tablets of similar size and shape were chosen for analysis (aspirin, ibuprofen, acetaminophen, vitamin C, and vitamin B12). The measures of successful tablet identification were intertablet distances in nonparametric multidimensional standard deviations (MSDs) greater than, 3 and intratablet MSDs less than 3, as calculated from an extended bootstrap erroradjusted single sample technique. The average intertablet MSD was 65.64, while the average intratablet MSD from cross-validation was 1.91. Tablet mass (r²=0.977), thickness (r²=0.977), and density (r²=0.900) were measured very accurately from the AR spectra, each with less than 10% error. Tablets were identified correctly with only 250 ms data collection time. These results demonstrate that ARS effectively identified and characterized the 5 types of tablets and could potentially serve as a rapid high-throughput online pharmaceutical sensor. Published: March 17, 2006