KxVPO4F (x∼0): A New High-Voltage and Low-Stain Cathode Material for Ultrastable Calcium Rechargeable Batteries

The utilization of high-voltage intercalation cathodes in calcium-ion batteries (CIBs) is impeded by the substantial size and divalent character of Ca²⁺ ions, which result in pronounced volume alterations and sluggish ion mobility, consequently causing inferior reversibility and low energy/power densities. To tackle these issues, polyanionic K-vacant K_xVPO₄F (x∼0, designated as K₀VPF) is proposed as high-voltage and ultra-stable cathode material in CIBs. The K₀VPF demonstrates a decent calcium storage capacity of 75 mAh g⁻¹ at 10 mA g⁻¹ and remarkable capacity retention of 84.2% over 1000 cycles. The average working voltage of the K₀VPF is 3.85 V versus Ca²⁺/Ca, representing the highest value reported for CIB cathodes to date. The combined experimental and theoretical investigations revealed that the low volume changes and hopping diffusion barriers contribute to the extraordinary stability and high-power capabilities, respectively, of K₀VPF. The distribution of Ca ions into polyanionic frameworks with pronounced spatial separation effectively attenuates the Ca²⁺–Ca²⁺ repulsive force and thus augmenting the Ca migration kinetics. The high voltage of K₀VPF is attributed to the inductive effect from the largely electronegative fluorine. In conjunction with a calcium metal anode and a compatible electrolyte, Ca metal full cells featured a record-high energy density of ≈300 Wh kg⁻¹.     

High-Areal-Capacity and Long-Cycle-Life All-Solid-State Lithium-Metal Battery by Mixed-Conduction Interface Layer

The rapid growth of lithium dendrites has seriously hindered the development and practical application of high-energy-density all-solid-state lithium metal batteries (ASSLMBs). Herein, a soft carbon (SC)-nano Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) (with high ionic conductivity and diffusion coefficient) mixed ionic and electronic conducting interface layer is designed to promote the rapid migration of Li⁺ at the interfacial layer, induce the uniform deposition of lithium metal on nanoscale (nano) LLZTO ion-conducting network inside the interface layer, effectively suppress the growth of lithium dendrites, and significantly improve the electrochemical performance of ASSLMBs. LiZrO₂@LiCoO₂(LZO@LCO)/Li₆PS₅Cl(LPSCl)-nano LLZTO/Li ASSLMB achieves high current density (12.5 mA cm⁻²), ultra-high areal capacity (15 mAh cm⁻², corresponding to LZO@LCO mass loadings of 111.11 mg cm⁻²), and ultra-long cycle life (20 000 cycles). Therefore, the introduction of SC-nano LLZTO mixed conducting interface layer can greatly improve the interfacial stability between solid-state electrolyte (SSE) and lithium metal anode to enable dendrite-free ASSLMBs.     

Inhibiting Dendrite Formation and Electrode Corrosion via a Scalable Self-Assembled Mercaptan Layer for Stable Aqueous Zinc Batteries

The practical use of Zn metal anodes in aqueous zinc batteries is impeded by the growth of dendrites, anode corrosion, and hydrogen evolution reaction in aqueous electrolytes. In this study, a simple, energy-efficient, and scalable approach is reported to mitigate these detrimental issues effectively. Using 1-hexanethiol (HT), a hydrophobic self-assembled mercaptan layer (SAML) with a highly ordered structure is in situ created on the surface of the Zn anode. This ultrathin interfacial structure guides uniform Zn deposition and shields the Zn anode from water and oxygen-induced corrosion, thus effectively inhibiting dendrite formation and side reactions. Consequently, the HT-Zn electrode showcases impressive electrochemical stability and reversibility, and the as-assembled HT-Zn||I₂ full cell delivers increased specific capacity (from 112 to 155 mAh g⁻¹ at 1 A g⁻¹) and ultra-stable cyclability (zero capacity decay during the extended 1500 cycles at 4 A g⁻¹). To validate the effectiveness of this simple and scalable method, a large-sized pouch cell is prepared, which can be stably operated for 1000 cycles with a capacity decay of merely 0.0098% per cycle and Coulombic efficiency exceeding 99.1%. The presented SAML strategy highlights the potential of molecular engineering in improving the performance of aqueous zinc batteries.     

Mechanistic Understanding of Additive Reductive Degradation and SEI Formation in High-Voltage NMC811||SiOx-Containing Cells via Operando ATR-FTIR Spectroscopy

The implementation of silicon (Si)-containing negative electrodes is widely discussed as an approach to increase the specific capacity of lithium-ion batteries. However, challenges caused by severe volume changes and continuous (re-)formation of the solid-electrolyte interphase (SEI) on Si need to be overcome. The volume changes lead to electrolyte consumption and active lithium loss, decaying the cell performance and cycle life. Herein, the additive 2-sulfobenzoic acid anhydride (2-SBA) is utilized as an SEI-forming electrolyte additive for SiO_x-containing anodes. The addition of 2-SBA to a state-of-the-art carbonate-based electrolyte in high-voltage LiNi_0.8Mn_0.1Co_0.1O₂, NMC811||artificial graphite +20% SiO_x pouch cells leads to improved electrochemical performance, resulting in a doubled cell cycle life. The origin of the enhanced cell performance is mechanistically investigated by developing an advanced experimental technique based on operando attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. The operando ATR-FTIR spectroscopy results elucidate the degradation mechanism via anhydride ring-opening reactions after electrochemical reduction on the anode surface. Additionally, ion chromatography conductivity detection mass spectrometry, scanning electron microscopy, energy dispersive X-ray analysis, and quantum chemistry calculations are employed to further elucidate the working mechanisms of the additive and its degradation products.     

Boundary-Free Metal–Organic Framework Glasses Enable Highly Stable All-Solid-State Lithium–Oxygen Battery

Rechargeable lithium–oxygen batteries (LOBs) are considered to be one of the most promising energy storage systems. However, the use of reactive lithium (Li) metal and the formation of Li dendrites during battery operation would lead to serious safety concerns, especially when flammable liquid electrolytes are utilized. Herein, superior metal–organic framework (MOF) glass-based solid-state electrolytes (SSEs) is developed for stable all-solid-state LOBs (SSLOBs). These non-flammable and boundary-free MOF glass SSEs are capable of suppressing the dendrite growth and exhibiting long-term Li stripping/plating stability, contributing to superior Li⁺ conductivity (5 × 10⁻⁴ S cm⁻¹ at 20 °C), high Li⁺ transference number (0.86), and good electrochemical stability. It is discovered that discharge product deposition behavior in the solid-solid interface can be well regulated by the ion/electron mixed conducted cathode fabricated with MOF glass SSEs and electronic conductive polymers. As a result, the SSLOBs can be stably recharged for 400 cycles with a low polarization gap and deliver a high capacity of 13552 mAh g⁻¹. The development of this proposed MOF glass displays great application potential in energy storage systems with good safety and high energy density.     

Single-Atom Immobilization Boosting Oxygen Redox Kinetics of High-Entropy Perovskite Oxide Toward High-Performance Lithium-Oxygen Batteries

Understanding and modulating the unique electronic interaction between single-metal atoms and high entropy compounds are of great significance to enable their high-efficiency oxygen electrocatalysis for aprotic lithium-oxygen (Li-O₂) batteries. Herein, a novel bi-functional electrocatalyst is for the first time created by immobilizing single-atom ruthenium (Ru) on lanthanum-based high entropy perovskite oxide La(Mn_0.2Co_0.2Fe_0.2Ni_0.2Cr_0.2)O₃ (Ru@HEPO), which demonstrates high activity and stability in Li-O₂ batteries. The heteronuclear coordination between single-atom Ru and HEPO facilitates fast electron transfer from Ru to HEPO by establishing Ru-O-M (M stands for Mn, Co, Fe, Ni) bridges, which well redistributes electrons within the Ru@HEPO hence significantly improving its interfacial charge transfer kinetics and electrocatalytic activity. Additionally, the strong electron coupling between Ru and Mn atoms enhances the hybridization between Mn 3d and O 2p orbitals, which promotes the inherent affinity of Ru@HEPO toward the LiO₂ intermediate, thereby reducing the reaction energy barrier of the oxygen electrode. As a result, the Ru@HEPO-based Li-O₂ batteries deliver remarkable electrochemical performances, such as high energy efficiency (87.3% at 100 mA g⁻¹), excellent rate capability (low overpotential of 0.52 V at 100 mA g⁻¹) and durable cyclability (345 cycles at 300 mA g⁻¹). This work opens up a promising avenue for the development of high entropy-based electrocatalysts for Li-O₂ batteries by precisely tailoring the electronic distributions at an atomic scale.     

An Antiaging Electrolyte Additive for High‐Energy‐Density Lithium‐Ion Batteries

High‐capacity Li‐rich layered oxide cathodes along with Si‐incorporated graphite anodes have high reversible capacity, outperforming the electrode materials used in existing commercial products. Hence, they are potential candidates for the development of high‐energy‐density lithium‐ion batteries (LIBs). However, structural degradation induced by loss of interfacial stability is a roadblock to their practical use. Here, the use of malonic acid‐decorated fullerene (MA‐C₆₀) with superoxide dismutase activity and water scavenging capability as an electrolyte additive to overcome the structural instability of high‐capacity electrodes that hampers the battery quality is reported. Deactivation of PF₅ by water scavenging leads to the long‐term stability of the interfacial structures of electrodes. Moreover, an MA‐C₆₀‐added electrolyte deactivates the reactive oxygen species and constructs an electrochemically robust cathode‐electrolyte interface for Li‐rich cathodes. This work paves the way for new possibilities in the design of electrolyte additives by eliminating undesirable reactive substances and tuning the interfacial structures of high‐capacity electrodes in LIBs.     

Accessing the Two‐Electron Charge Storage Capacity of MnO2 in Mild Aqueous Electrolytes

Rechargeable batteries based on MnO₂ cathodes, able to operate in mild aqueous electrolytes, have attracted attention due to their appealing features for the design of low‐cost stationary energy storage devices. However, the charge/discharge mechanism of MnO₂ in such media is still a matter of debate. Here, an in‐depth quantitative spectroelectrochemical analysis of MnO₂ thin‐films provides a set of unrivaled mechanistic insights. A major finding is that charge storage occurs through the reversible two‐electron faradaic conversion of MnO₂ into Mn²⁺ in the presence of a wide range of weak Brønsted acids, including the [Zn(H₂O)₆]²⁺ or [Mn(H₂O)₆]²⁺ complexes present in aqueous Zn/MnO₂ batteries. Furthermore, it is shown that buffered electrolytes loaded with Mn²⁺ are ideal to achieve highly reversible conversion of MnO₂ with both high gravimetric capacity and remarkably stable charging/discharging potentials. In the most favorable case, a record gravimetric capacity of 450 mA·h·g^?1 is obtained at a high rate of 1.6 A·g^?1, with a Coulombic efficiency close to 100% and a MnO₂ utilization of 84%. Overall, the present results challenge the common view on MnO₂ the charge storage mechanism in mild aqueous electrolytes and underline the benefit of buffered electrolytes for high‐performance rechargeable aqueous batteries.     

High‐Voltage‐Driven Surface Structuring and Electrochemical Stabilization of Ni‐Rich Layered Cathode Materials for Li Rechargeable Batteries

Layered lithium–nickel–cobalt–manganese oxide (NCM) materials have emerged as promising alternative cathode materials owing to their high energy density and electrochemical stability. Although high reversible capacity has been achieved for Ni‐rich NCM materials when charged beyond 4.2 V versus Li⁺/Li, full lithium utilization is hindered by the pronounced structural degradation and electrolyte decomposition. Herein, the unexpected realization of sustained working voltage as well as improved electrochemical performance upon electrochemical cycling at a high operating voltage of 4.9 V in the Ni‐rich NCM LiNi_0.895Co_0.085Mn_0.02O₂ is presented. The improved electrochemical performance at a high working voltage at 4.9 V is attributed to the removal of the resistive Ni²⁺O rock‐salt surface layer, which stabilizes the voltage profile and improves retention of the energy density during electrochemical cycling. The manifestation of the layered Ni²⁺O rock‐salt phase along with the structural evolution related to the metal dissolution are probed using in situ X‐ray diffraction, neutron diffraction, transmission electron microscopy, and X‐ray absorption spectroscopy. The findings help unravel the structural complexities associated with high working voltages and offer insight for the design of advanced battery materials, enabling the realization of fully reversible lithium extraction in Ni‐rich NCM materials.