QT interval measurement using RMED curve; a novel approach based on wavelet techniques

Hypothesis/objective: Prolonged QT interval is an index of propensity for dangerous ventricular tachyarrhythmias. The aim of this article is to establish an automatic algorithm for QT interval measurement.

Method: The proposed method is based on the continuous wavelet transform. In this method, the concepts of the rescaled wavelet coefficients and dominant scales of the electrocardiogram (ECG) components are used to perform detection of ECG characteristic points. A new concept of rescaled maximum energy density is introduced so as to perform the estimation of the QT interval.

Results and conclusion: We have applied the algorithm to the PTB database of the Physiobank?Physionet in lead II. Then, the results were evaluated using pertinent reference QT. The criterion used for evaluation of the method's performance is the root mean square (RMS) error. The method approached the RMS error of 27.89 ms for 549 subjects. The proposed method is fast, simple and is applicable to a wide range of ECG cardio cycle morphologies.     

Leveraging flow mechanics to determine critical process and scaling parameters in a continuous viral inactivation reactor

A continuous viral inactivation (CVI) chamber has been designed to operate with acceptable residence time distribution (RTD) characteristics. However, altering the CVI's geometry and operation to accommodate the scale was not obvious. In this work, we elucidate the influence of Dean vortices and leverage the transition into the weak turbulent regime to establish relationships between input variables and process outputs. This study was targeted to understand and quantify the impact of viscosity, Dean number, internal diameter, and path length on the RTD. When the Dean number exceeds 70, radial mixing generated by the Dean vortices began to consistently alter the axial dispersive effects experienced by the pulse injection. Increasing to a Dean number of >100, the axial dispersive effects were dominated by the Dean vortices which allowed the calculation of the minimum and maximum residence time to be generated. This work provides a method to calculate operational solutions for a tubular incubation reactor in terms of path length, internal diameter, flow rate, and target minimum and maximum residence time specifications that assures both viral residence times while also establishing criteria to maximize product quality during continuous operation.     

Improved protein A resin for antibody capture in a continuous countercurrent tangential chromatography system

Continuous countercurrent tangential chromatography (CCTC) enables steady-state continuous bioprocessing with low-pressure operation and high productivity. CCTC has been applied to initial capture of monoclonal antibodies (mAb) from clarified cell culture harvest and postcapture polishing of mAb; however, these studies were performed with commercial chromatography resins designed for conventional column chromatography. In this study, a small particle size prototype agarose resin (20–25 µm) with lower cross-linking was co-developed with industrial partner Purolite and tested with CCTC. Due to increased binding capacity and faster kinetics, the resulting CCTC process showed more than a 2X increase in productivity, and a 2X reduction in buffer consumption over commercial protein A resins used in previous CCTC studies, as well as more than a 10X productivity increase versus conventional column operation. Single-pass tangential flow filtration was integrated with the CCTC system, enabling simple control of eluate concentration. A scale-up exercise was conducted to provide a quantitative comparison of CCTC and batch column chromatography. These results clearly demonstrate opportunities for using otherwise unpackable soft small particle size resins with CCTC as the core of a continuous bioprocessing platform.     

Side-by-side comparability of batch and continuous downstream for the production of monoclonal antibodies

Continuous processing is the future production method for monoclonal antibodies (mAbs). A fully continuous, fully automated downstream process based on disposable equipment was developed and implemented inside the MoBiDiK pilot plant. However, a study evaluating the comparability between batch and continuous processing based on product quality attributes was not conducted before. The work presented fills this gap comparing both process modes experimentally by purifying the same harvest material (side-by-side comparability). Samples were drawn at different time points and positions in the process for batch and continuous mode. Product quality attributes, product-related impurities, as well as process-related impurities were determined. The resulting polished material was processed to drug substance and further evaluated regarding storage stability and degradation behavior. The in-process control data from the continuous process showed the high degree of accuracy in providing relevant process parameters such as pH, conductivity, and protein concentration during the entire process duration. Minor differences between batch and continuous samples are expected as different processing conditions are unavoidable due to the different nature of batch and continuous processing. All tests revealed no significant differences in the intermediates and comparability in the drug substance between the samples of both process modes. The stability study of the final product also showed no differences in the stability profile during storage and forced degradation. Finally, online data analysis is presented as a powerful tool for online-monitoring of chromatography columns during continuous processing.     

Yield loss of faba bean (Vicia faba) due to chocolate spot (Botrytis fabae) in sole and mixed cropping systems in Ethiopia

Two field experiments were conducted during 2004 and 2005 cropping seasons at Adet Agricultural Research Center, Ethiopia to assess yield losses caused by chocolate spot(Botrytis fabae) of faba bean in sole and mixed cropping systems using two cultivars. Cropping systems were sole faba bean (FB), faba bean mixed with field pea (FB: FP), barley (FB: BA) and maize (FB: MA). Mancozeb was sprayed at the rate of 2.5 kg a.i/ha at 7-, 14- and 21-day interval to generate different levels of chocolate spot disease in all the four cropping systems, and unsprayed control was also included. The treatments were arranged in a randomised complete block design (RCBD) with four replications. FB: MA mixed cropping significantly reduced disease severity and the area under disease progress curve (AUDPC) and increased faba bean grain yield. The highest faba bean grain yield among the three mixed croppings under different spray schedules was obtained from FB: MA mixed cropping in both 2004 and 2005 (2.56 and 3.74 t/ha, respectively) cropping seasons. There were highly significant yield differences (P < 0.05) among the spray intervals of mancozeb in both seasons. The highest grain yield (4.9 t/h) was recorded from the 7-day spray interval in 2005. The unsprayed faba bean had a lower grain yield (1.9 t/ha in 2004 and 2.3 t/ha in 2005) compared to the sprayed plots. The highest relative yield loss (67.5%) was calculated in 2005 from FB: FP mixed cropping in unsprayed plots. The relative yield losses in the unsprayed plots were in the range of 35.8–41.5% in 2004 and 52.6–67.5% in the 2005 cropping season. Severity and AUDPC were inversely correlated with faba bean grain yield. Significant differences were recorded in the 100-seed weight and days to maturity (DM). The unsprayed plots had shorter DM ranging from 126 to 128.5 day (except FB: MA mixed cropping) in 2004 and 122–123.9 days in 2005. In the sprayed plots DM was relatively longer than the unsprayed plots. A higher seed weight was recorded in the sole FB (56 g) and FB: MA (55 g) mixed cropping, and the lowest value of 100-seed weight was recorded from FB: FP (53 g) mixed cropping. The productivity of the mixed cropping evaluated by land equivalent ratio (LER) exceeded that of sole cropping. Faba bean grain yield was highly influenced by the severity of chocolate spot. The disease affects the DM, forcing early maturing of the plants.     

Evaluation of some fungal diseases and yield of groundnut in groundnut-based cropping systems

A study on the evaluation of some fungal diseases and yield of groundnut in groundnut-based cropping systems was conducted in 2002 and 2003 planting seasons. Analysis of variance indicated that intercropping was highly significant on leaf spot disease severity 0.76; 0.75, rust 2.75; 2.69, as well as percentage defoliation 78.42%; 78.10% in 2002 and 2003, respectively. Plant population was significant on leaf spot severity 4.52, 4.60 rust 2.76; 366 and defoliation 226.5; 441.1 fungal as well as yield, while interactions were not significant on the fungal diseases and yield. Sole groundnut recorded significantly high severity of the fungal diseases investigated but low yield, when groundnut was intercropped with maize and melon and recorded the lowest yield in 2002 and 2003 respectively. 250,000 plants/ha recorded the lowest severity of the diseases investigated, while 444,444 plants/ha recorded the highest. Sole groundnut also recorded the highest percentage defoliation 79.37%, 79.25% when groundnut was intercropped with maize recorded the lowest 77.06%; 77.60%. 250,000 plants/ha had the lowest defoliation when 444,444 plants/ha had the highest 80.75% 82.13% in 2002 and 2003, respectively. Sole groundnut recorded the lowest in the majority of yields when intercropped with maize and with melon recorded a high yield and yield components in 2002 and 2003, respectively. The microorganisms identified were Cercospora spp., Aspergillus linked and Blastomyces.     

Inactivation of Pseudomonas aeruginosa biofilms formed under high shear stress on various hydrophilic and hydrophobic surfaces by a continuous flow of ozonated water

Abstract

The inactivation of Pseudomonas aeruginosa biofilms grown on glass under high shear stress and exposed to a range of dissolved ozone concentrations (2, 5 and 7?ppm) at 10 and 20?min was investigated. The regression equation, log reduction (biofilm)?=?0.64?+?0.59×(C – 2)?+?0.33×(T – 10), described the dependence of biofilm inactivation on the dissolved ozone concentration (C, ppm) and contact time (T, min). The predicted D-values were 11.1, 5.7 and 2.2?min at 2, 5 and 7?ppm, respectively. Inactivation of biofilms grown on various surfaces was tested at a single dissolved ozone concentration of 5?ppm and a single exposure time of 20?min. Biofilms grown on plastic materials showed inactivation results similar to that of biofilms on glass, while biofilms grown on ceramics were statistically significantly more difficult to inactivate, suggesting the importance of utilizing non-porous materials in industrial and clinical settings.     

Diversity and abundance of wild host plants of lepidopteran stem borers in two different agroecological zones of Kenya

A survey was carried out between 2004 and 2005 in two ecologically different locations, Kakamega and Muhaka to assess diversity and abundance of wild host plants of lepidopteran stem borers as compared to maize plots during the cropping and non-cropping seasons. Kakamega in Western Kenya is characterized by a Guineo-Congolian rain forest mosaic and Muhaka at the Kenyan coast by a Zanzibar Inhambane mosaic with secondary grassy and woody vegetation. In Kakamega, wild host plants and maize covered 2 and 43% of the surveyed area. No variation in diversity and relative abundance of wild host plants was observed between both the cropping and non-cropping seasons. In Muhaka, the diversity and relative abundance of wild host plant species differed between seasons, with the Shannon Weaver Index (H) of 1.67 and 0.95 for cropping and non-cropping seasons, respectively. Similarly in this location, wild host plant cover varied between cropping (23%) and noncropping (17.9%). During both seasons, this was higher than the maize cover, with 10.7% and 0% for the cropping and non-cropping seasons, respectively. For both localities, the implication of the differences found in the abundance and diversity between the cropping and non-cropping seasons is discussed.