Measurement of Reactive Oxygen Species in the Culture Media Using Acridan Lumigen PS-3 Assay

Reactive oxygen species (ROS) are generated continuously during aerobic metabolism. ROS are highly reactive molecules and in excessive amounts, can lead to protein and DNA oxidation, protein cross-linking, and cell death. Cell-culture models provide a valuable tool in understanding the mechanisms that lead to cell death. Accumulation of ROS within cells and/or their release into the culture media are highly cell type-specific. The ability to estimate ROS levels in the culture media is an important step in understanding the mechanisms contributing to disease processes. In this paper, we describe the optimization of a simple method to estimate ROS levels in the culture media using the Acridan Lumigen PS-3 reagent provided in the Amersham ECL Plus kit (GE Healthcare, UK). We have shown that the Acridan Lumigen PS-3 assay generates ROS-specific chemiluminescence in fresh as well as media stored at −20°C, in as little as 10–20 μl of samples. The method was able to detect the dose (of stimulants)- and time (acute and chronic)-dependent changes in ROS levels in media collected from various cell types. Our results suggest that the kit reagents, PBS buffer, and various media did not contribute significantly to the overall chemiluminescence generated in the assay; however, we suggest that the unused medium specific for each cell type should be used as blanks and final readings of test samples normalized against these readings. As this method uses commonly available laboratory equipment and commercially available reagents, we believe this assay is convenient, economical, and specific in estimating ROS released extracellularly into the culture media.     

Single Nanostructure Electrochemical Devices for Studying Electronic Properties and Structural Changes in Lithiated Si Nanowires

Nanostructured Si is a promising anode material for the next generation of Li‐ion batteries, but few studies have focused on the electrical properties of the Li‐Si alloy phase, which are important for determining power capabilities and ensuring sufficient electrical conduction in the electrode structure. Here, we demonstrate an electrochemical device framework suitable for testing the electrical properties of single Si nanowires (NWs) at different lithiation states and correlating these properties with structural changes via transmission electron microscopy (TEM). We find that single Si NWs usually exhibit Ohmic I–V response in the lithiated state, with conductivities two to three orders of magnitude higher than in the delithiated state. After a number of sequential lithiation/delithiation cycles, the single NWs show similar conductivity after each lithiation step but show large variations in conductivity in the delithiated state. Finally, devices with groups of NWs in physical contact were fabricated, and structural changes in the NWs were observed after lithiation to investigate how the electrical resistance of NW junctions and the NWs themselves affect the lithiation behavior. The results suggest that electrical resistance of NW junctions can limit lithiation. Overall, this study shows the importance of investigating the electronic properties of individual components of a battery electrode (single nanostructures in this case) along with studying the nature of interactions within a collection of these component structures.     

不同表面处理对全瓷材料表面粗糙度及表面自由能的影响

目的:比较分析三种不同表面处理方法对全瓷材料表面粗糙度及表面自由能的影响。方法:选用两种氧化锆(LAVA Plus,Wieland)和两种玻璃陶瓷(E.max Press,ELDC),按照生产商的制作方法制作成盘状试件(直径13 mm,厚1 mm),并将以上四组全瓷材料按照不同的表面处理方式分别分为以下三个亚组:粗磨组(rough grinding)、抛光组(polishing)和上釉组(glazing)。利用三维形貌扫描仪测量样本表面的面粗糙度(Sa),表面张力仪测量各组样本表面接触角并计算表面自由能。结果:各组材料粗磨组粗糙度值均显著高于其抛光组及上釉组;对于两种氧化锆陶瓷,抛光组与上釉组间粗糙度值无显著差异(P0.05),而对于两种玻璃陶瓷,抛光组的粗糙度值显著低于上釉组(P0.05);上釉组表面自由能均显著高于相应粗磨组及抛光组(P0.05),粗磨组和抛光组间无显著性差异。结论:抛光和上釉均能显著降低全瓷材料的表面粗糙度,对于氧化锆陶瓷,抛光能达到类似上釉的表面粗糙度,对于玻璃陶瓷,抛光能够获得更加光滑的表面。上釉后全瓷材料的表面自由能显著高于抛光组。     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.     

Effect of adaptation to high light intensity on the kinetics of energy transfer from phycobilisomes to photosystem II in Anabaena cylindrica

Transfer efficiencies between phycobilisomes and photosystem II antenna chlorophylls were determined on membrane fragments isolated from low and high light adapted Anabaena cells. The observed increase in energy transfer in high light adapted cells is a consequence of shorter interchromophore distances and a decrease in the number of jumps of the exciting photons. Calculation of the rates of energy transfer and the coupling energies indicate that the weak interaction inferred for energy transfer between phycobilisome and photosystem II in low light adapted cells is replaced by an intermediate interaction in high light adapted cells.Abbreviations LLA low light adapted - HLA high light adapted - PBS phycobilisome - PS photosystem     

Oxygen‐Deficient Blue TiO2 for Ultrastable and Fast Lithium Storage

Developing a titanium dioxide (TiO₂)‐based anode with superior high‐rate capability and long‐term cycling stability is important for efficient energy storage. Herein, a simple one‐step approach for fabricating blue TiO₂ nanoparticles with oxygen vacancies is reported. Oxygen vacancies can enlarge lattice spaces, lower charge transfer resistance, and provide more active sites in TiO₂ lattices. As a result, this blue TiO₂ electrode exhibits a highly reversible capacity of 50 mAh g^?1 at 100 C (16 800 mA g^?1) even after 10 000 cycles, which is attributable to the combination of surface capacitive process and remarkable diffusion‐controlled insertion revealed by the kinetic analysis. The strategy of employing oxygen‐deficient nanoparticles may be extended to the design of other robust semiconductor materials as electrodes for energy storage.     

Burial of nonpolar surface area and thermodynamic stabilization of globins as a function of chain elongation

Proteins are biosynthesized from N to C terminus before they depart from the ribosome and reach their bioactive state in the cell. At present, very little is known about the evolution of conformation and the free energy of the nascent protein with chain elongation. These parameters critically affect the extent of folding during ribosome‐assisted biosynthesis. Here, we address the impact of vectorial amino acid addition on the burial of nonpolar surface area and on the free energy of native‐like structure formation in the absence of the ribosomal machinery. We focus on computational predictions on proteins bearing the globin fold, which is known to encompass the 3/3, 2/2, and archaeal subclasses. We find that the burial of nonpolar surface increases progressively with chain elongation, leading to native‐like conformations upon addition of the last C‐terminal residues, corresponding to incorporation of the last two helices. Additionally, the predicted folding entropy for generating native‐like structures becomes less unfavorable at nearly complete chain lengths, suggesting a link between the late burial of nonpolar surface and water release. Finally, the predicted folding free energy takes a progressive favorable dip toward more negative values, as the chain gets longer. These results suggest that thermodynamic stabilization of the native structure of newly synthesized globins during translation in the cell is significantly enhanced as the chain elongates. This is especially true upon departure of the last C‐terminal residues from the ribosomal tunnel, which hosts ca., 30–40 amino acids. Hence, we propose that release from the ribosome is a crucial step in the life of single‐domain proteins in the cell. Proteins 2014; 82:2318–2331. © 2014 Wiley Periodicals, Inc.     

Integration of diffraction phase microscopy and Raman imaging for label‐free morpho‐molecular assessment of live cells

Label‐free quantitative imaging is highly desirable for studying live cells by extracting pathophysiological information without perturbing cell functions. Here, we demonstrate a novel label‐free multimodal optical imaging system with the capability of providing comprehensive morphological and molecular attributes of live cells. Our morpho‐molecular microscopy (3M) system draws on the combined strength of quantitative phase microscopy (QPM) and Raman microscopy to probe the morphological features and molecular fingerprinting characteristics of each cell under observation. While the commonr‐path geometry of our QPM system allows for highly sensitive phase measurement, the Raman microscopy is equipped with dual excitation wavelengths and utilizes the same detection and dispersion system, making it a distinctive multi‐wavelength system with a small footprint. We demonstrate the applicability of the 3M system by investigating nucleated and nonnucleated cells. This integrated label‐free platform has a promising potential in preclinical research, as well as in clinical diagnosis in the near future.