Thermoluminescence Investigation of Low Temperature Stress in Maize

The thermoluminescence (TL) emission of photosynthesising materials originates from the recombination of charge pairs created by a previous excitation. Using a recently described TL set-up the effect of chilling stress on TL bands occurring at positive temperatures (AG, B, and HTL) was investigated in intact leaves. The far-red irradiation of leaves at low, but non-freezing temperatures induced a TL band peaking at around 40–45 °C (AG band), together with a B band peaking between 20 and 35 °C. Low temperature stress first caused a downshift and a temporary increase in the AG band after 4 h at 0 °C in the light, then a decrease in the AG and B TL bands after 1 d at 0 °C in the light. This decrease was less pronounced in cold-tolerant genotypes and in those grown at acclimating temperatures. Furthermore, an additional band appeared above 80 °C after severe cold stress. This band indicates the presence of lipid peroxides. Thus TL is a useful technique for studying the effects of low temperature stress.     

Afterglow thermoluminescence band as a possible early indicator of changes in the photosynthetic electron transport in leaves

The afterglow (AG) band of thermoluminescence (TL) has been investigated in leaves of Arabidopsis thaliana. Excitation of dark-adapted leaves with two saturating single turn-over flashes induced the appearance of a complex TL glow curve that could be well simulated by three components: the two components, B₁ and B₂, of the usually called B-band, peaking at 18 and 26 °C, respectively, and a band with t_max at 41 °C, which we attributed to an AG emission. Illumination of dark-adapted leaves with 720 nm monochromatic and FR lights generated the emission of a sharp single band peaking also around at 41 °C, that it is usually assigned to an AG emission band. Dark-incubation of whole plants increased the intensity of AG-band in TL curves induced by two flashes and, in parallel, decreased B-bands. Selective illumination of leaves with light mostly absorbed by PS II (650 nm light) completely abolished the AG-band induced by two flashes, B-band being the only TL band observed. The single AG-band induced by 720 nm light was abolished if leaves were also illuminated with 650 nm light. On the other hand, AG-band could be restored if 650 nm illuminated leaves were afterwards illuminated with 720 nm light. The changes in the intensity of B and AG bands induced by selective illuminations seem to be related to alterations in the redox state of Q_B and plastoquinone pool.     

Studies on the luminescence properties of cerium co‐doping on Ca2MgSi2O7:Eu2+ phosphor by solid‐state reaction method

Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were prepared using the solid‐state reaction method. The crystal structures of the sintered phosphors were of melilite type, which has a tetragonal crystallography. The chemical compositions of the sintered phosphors was confirmed by energy dispersive X‐ray spectroscopy. The different thermoluminescence kinetic parameters [activation energy (E), frequency factor (s) and order of the kinetics (b)] of these phosphors were evaluated and compared using the peak shape method. Under ultraviolet excitation, the emission spectra of both Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors were composed of a broad emission band peaking at 530 nm. When the Ca₂MgSi₂O₇:Eu²⁺ phosphor is co‐doped with Ce³⁺ ions, photoluminescence, afterglow and mechanoluminescence intensity was strongly enhanced. Ca₂MgSi₂O₇:Eu²⁺ showed some afterglow with a short persist time. On incorporation of Ce³⁺, efficient energy transfer from Ce³⁺ to Eu²⁺ was found and the emission intensity of Eu²⁺ was enhanced. The mechanoluminescence intensities of Ca₂MgSi₂O₇:Ce³⁺, Ca₂MgSi₂O₇:Eu²⁺ and Ca₂MgSi₂O₇:Eu²⁺,Ce³⁺ phosphors increased proportionally increased with the increase in impact velocity, which suggests that these phosphors can be used as sensors to detect stress in an object.     

Effect of cooling rate on the microstructure and luminescence properties of Sr2MgSi2O7:Eu2+,Dy3+ materials

Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ long afterglow materials were prepared by a high‐temperature solid‐state reaction method with different cooling rates. The cooling rate had a slight effect on X‐ray diffraction patterns and photoluminescence performance, but significantly modified the grain boundaries and long afterglow properties of the Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ materials. When the cooling rate was 1°C/min, grains remained intact with clear grain boundaries. As the cooling rate increased from 1°C/min to 5°C/min, some grain boundaries became indistinguishable. The afterglow properties were optimized, presenting best performance at the cooling rate of 3°C/min. The trap state was investigated and illustrated through thermoluminescence curves. The depths of the traps of all the samples were unchanged, whereas densities changed to a large extent, leading to different afterglow properties. The retrapping process is discussed based on the afterglow curves.     

Photoluminescent polymer-based smart window reinforced with electrospun glass nanofibres

Poly(vinyl chloride) (PVC) was reinforced with electrospun glass nanofibres (EGN) to develop photochromic and afterglow materials such as smart windows and anti-counterfeiting prints. A colourless electrospun glass nanofibres@poly(vinyl chloride) (EGN@PVC) sheet was prepared by physical integration of lanthanide-doped aluminate nanoparticles (LANP). The low concentrations of LANP in the photochromic and photoluminescent EGN@PVC hybrids displayed fluorescence emission with instant reversibility. EGN@PVC with the highest phosphor concentrations showed persistent phosphorescence emission with slow reversibility. Based on the results of the Commission Internationale de l'éclairage Laboratory and luminescence spectroscopy, the translucent EGN@PVC samples became green in the presence of ultraviolet illumination and greenish-yellow in the absence of light. According to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the morphological study of EGN and LANP showed diameters of 75–95 and 11–19 nm, respectively. The morphology of the EGN@PVC substrates was studied using SEM, X-ray fluorescence, and energy-dispersive X-ray spectroscopy. The mechanical characteristics of PVC were enhanced by reinforcement with EGN as a roughening agent. When comparing the scratching resistance of LANP-free substrate to photoluminescent EGN@PVC substrates, it was observed that the latter was much superior. The photoluminescence spectra were reported to have an emission peak at 519 nm when excited at 365 nm. These findings demonstrated that the luminous transparent EGN@PVC composites had improved superhydrophobic and UV-blocking characteristics.     

Preparation of afterglow and photochromic fibrous mats from polypropylene plastics to detect ultraviolet light

Polypropylene textiles have been used in the development of various industrial products, such as automotives, plastic furniture, and medical tools. However, polypropylene resists dyeing due to a deficiency of active staining spots. Here, we developed a new strategy towards new afterglow and photochromic fibres from recycled polypropylene plastics using plasma-supported coloration with rare-earth activated aluminate nanoparticles (REANPs). Plasma curing was used to generate active dyeing sites on the polypropylene surface. A thin film of REANPs (2–10 nm) was deposited onto the plasma-pretreated polypropylene surface. Various analytical techniques were applied to inspect the morphology of the REANP-finished polypropylene fibres. The polypropylene dyeing activity was much improved after being exposed to plasma. Both photoluminescence analysis and Commission internationale de l’éclairage (CIE) laboratory coordinates proved that the polypropylene fibres exhibited a white colour in daylight and green in ultraviolet light. The thin afterglow layer immobilized onto the polypropylene surface exhibited an emission band of 524 nm upon excitation at 365 nm. The sliding angles dropped from 12° to 9°, but the contacting angles increased from 139.4° to 145.0° when the REANP ratio was raised. These findings show that REANP-finished polypropylene had good colourfastness, antimicrobial activity, and ultraviolet light blocking. Both stiffness and permeability to air of REANP-finished polypropylene were explored to designate excellent comfort characteristics.