Effect of papaya (Carica papaya) leaf extract as dietary growth promoter supplement in red hybrid tilapia (Oreochromis mossambicus × Oreochromis niloticus) diet

The purpose of this experiment was to examine the potential use of Carica papaya leaf extract as a supplement to promote growth and improve feed utilization in red hybrid tilapia. Five diets were formulated containing isolipidic (80 g/kg) and isonitrogenic (350 g/kg) levels. All feeds contained similar types and amounts of raw materials but differed in the inclusion of papaya leaf extract (0, 5, 10, 20 and 40 g/kg feed). The initial size of fish used was 2.3 ± 0.01 g. Each diet was performed in triplicate tanks, and the feeding period was 12 weeks. Fish fed diet containing 2% papaya leaf extract (PLE) had the highest final weight, 31.14 ± 1.47 g, followed by 1% PLE (27.27 ± 1.75 g). These two diets (1% and 2%) were also showed significant improvements of weight gain, SGR, and feed efficiency of the red hybrid tilapia (p < 0.05). However, papaya leaf extract did not affect the HSI, VSI, PER, digestive enzymes activity, blood composition, and survival rate. Supplementing the diets with papaya leaf extract lowered serum urea. Findings of this research suggest that adding papaya leaf extract to the diet of red hybrid tilapia improves growth and feed efficiency without adversely affecting blood parameters. Therefore, an inclusion level between 1% and 2% of the papaya leaf extract is recommended as a feed additive to promote red hybrid tilapia fry growth.     

研究性实验教学模式的探讨

从教学过程、教学效果等方面探讨了微生物学实验课程实施研究性实验教学模式的必要性以及具体实施的方法。实践表明,研究性实验教学模式对培养学生的创新意识,提高学生的实践能力等方面有积极的作用。     

Transgenic Melon and Squash Expressing Coat Protein Genes of Aphid-borne Viruses do not Assist the Spread of an Aphid Non- transmissible Strain of Cucumber Mosaic Virus in the Field

Transgenic melon and squash containing the coat protein (CP) gene of the aphid transmissible strain WL of cucumber mosaic cucumovirus (CMV) were grown under field conditions to determine if they would assist the spread of the aphid non-transmissible strain C of CMV, possibly through heterologous encapsidation and recombination. Transgenic melon were susceptible to CMV strain C whereas transgenic squash were resistant although the latter occasionally developed chlorotic blotches on lower leaves. Transgenic squash line ZW-20, one of the parents of commercialized cultivar Freedom II, which expresses the CP genes of the aphid transmissible strains FL of zucchini yellow mosaic (ZYMV) and watermelon mosaic virus 2 (WMV 2) potyviruses was also tested. Line ZW-20 is resistant to ZYMV and WMV 2 but is susceptible to CMV. Field experiments conducted over two consecutive years showed that aphid-vectored spread of CMV strain C did not occur from any of the CMV strain C-challenge inoculated transgenic plants to any of the uninoculated CMV-susceptible non- transgenic plants. Although CMV was detected in 3% (22/764) of the uninoculated plants, several assays including ELISA, RT- PCR-RFLP, identification of CP amino acid at position 168, and aphid transmission tests demonstrated that these CMV isolates were distinct from strain C. Instead, they were non-targeted CMV isolates that came from outside the field plots. This is the first report on field experiments designed to determine the potential of transgenic plants expressing CP genes for triggering changes in virus-vector specificity. Our results indicate that transgenic plants expressing CP genes of aphid transmissible strains of CMV, ZYMV, and WMV 2 are unlikely to mediate the spread of aphid non-transmissible strains of CMV. This finding is of practical relevance because transgenic crops expressing the three CP genes are targeted for commercial release, and because CMV is economically important, has a wide host range, and is widespread worldwide.     

Quantifying the evidence for ecological synergies

There is increasing concern that multiple drivers of ecological change will interact synergistically to accelerate biodiversity loss. However, the prevalence and magnitude of these interactions remain one of the largest uncertainties in projections of future ecological change. We address this uncertainty by performing a meta-analysis of 112 published factorial experiments that evaluated the impacts of multiple stressors on animal mortality in freshwater, marine and terrestrial communities. We found that, on average, mortalities from the combined action of two stressors were not synergistic and this result was consistent across studies investigating different stressors, study organisms and life-history stages. Furthermore, only one-third of relevant experiments displayed truly synergistic effects, which does not support the prevailing ecological paradigm that synergies are rampant. However, in more than three-quarters of relevant experiments, the outcome of multiple stressor interactions was non-additive (i.e. synergies or antagonisms), suggesting that ecological surprises may be more common than simple additive effects.     

厦门市交通主干道绿化带结构及其减噪效果研究

通过对厦门市主干道绿化带种类结构调查以及噪声测定等,分析了厦门市主干道绿化带结构及其减噪效果。结果表明,厦门市主干道绿化带可分为4种结构:单一乔木型、乔木+疏灌木/绿篱型、乔木+密灌木型以及乔木+小乔木+灌木/绿篱型,带宽多在4~10 m。厦门市主干道绿化带总体减噪能力为0.93~12.96 dB,绿化带对交通噪声超标治理率达70%。绿化带减噪能力y(dB)与带宽x(m)呈显著的线性关系:y=1.2251x+0.2416(R²=0.8603);绿化带的附加衰减与总衰减亦呈显著正相关:y=0.4535x+0.2698 (R²=0.9242),噪声的附加衰减主要受绿化带结构的影响,上述四种结构对噪声附加衰减平均值分别达0.93、2.25、4.43和6.72 dB。绿化带的宽度和结构均是影响其减噪效果的关键因素。     

生物实验学习软环境的创设

以情境认知和学习理论为指导,结合生物实验学习实际运用的成效,阐述了生物实验学习软环境创设的操作要领。     

植酸酶及其热稳定性研究进展

植酸酶能降解植物性饲料中的植酸盐类,释放出无机磷酸,对于提高饲料中磷的利用率,减轻畜禽高磷排泄物对环境的污染以及促进单胃动物对饲料中矿质营养的吸收利用有重要作用,因此植酸酶的研究有重要的科学和实用价值。获得高活性高热稳定性的植酸酶是近年来植酸酶工业的研究热点和难点,综述了植酸酶及其热稳定性研究的现状和提高植酸酶热稳定性方法的最新进展 。     

Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.