Comparative study on the growth and yield of<Emphasis Type="Italic"> Pleurotus ostreatus</Emphasis> mushroom on different lignocellulosic by-products

Eight lignocellulosic by-products were evaluated as substrates for cultivation of the oyster mushroom, Pleurotus ostreatus (Jacq. ex. fr) Kummer. The yields of mushroom on the different substrates were 183.1, 151.8, 111.5, 87.8, 49.5, 23.3, 13.0 and 0.0 g for composted sawdust of Triplochiton scleroxylon, rice straw, banana leaves, maize stover, corn husk, rice husk, fresh sawdust, and elephant grass, respectively. The biological efficiency (BE) followed the same pattern and ranged from 61.0% for composted sawdust to 0.0% for elephant grass. The yield of mushroom was positively correlated to cellulose (r ² =0.6), lignin (r ² =0.7) and fibre (r ² =0.7) contents of the substrates. Based on the yield and BE of the substrates tested, rice straw appeared to be the best alternate substrate for growing oyster mushrooms. Electronic Publication     

Identification of QTL for growth- and grain yield-related traits in rice across nine locations of Asia

Rice double-haploid (DH) lines of an indica and japonica cross were grown at nine different locations across four countries in Asia. Genotype-by-environment (G x E) interaction analysis for 11 growth- and grain yield-related traits in nine locations was estimated by AMMI analysis. Maximum G x E interaction was exhibited for fertility percentage number of spikelets and grain yield. Plant height was least affected by environment, and the AMMI model explained a total of 76.2% of the interaction effect. Mean environment was computed by averaging the nine environments and subsequently analyzed with other environments to map quantitative trait loci (QTL). QTL controlling the 11 traits were detected by interval analysis using mapmaker/qtl. A threshold LOD of >/=3.20 was used to identify significant QTL. A total of 126 QTL were identified for the 11 traits across nine locations. Thirty-four QTL common in more than one environment were identified on ten chromosomes. A maximum of 44 QTL were detected for panicle length, and the maximum number of common QTL were detected for days to heading detected. A single locus for plant height (RZ730-RG810) had QTL common in all ten environments, confirming AMMI results that QTL for plant height were affected the least by environment, indicating the stability of the trait. Two QTL were detected for grain yield and 19 for thousand-grain weight in all DH lines. The number of QTL per trait per location ranged from zero to four. Clustering of the QTL for different traits at the same marker intervals was observed for plant height, panicle number, panicle length and spikelet number suggesting that pleiotropism and or tight linkage of different traits could be the possible reason for the congruence of several QTL. The many QTL detected by the same marker interval across environments indicate that QTL for most traits are stable and not essentially affected by environmental factors.     

杨树基因工程进展

本文重点对杨树的遗传转化技术进行了概述,讨论了影响农杆菌转化效果的主要因素,并综述了杨树在抗除草剂、抗虫和抗病等方面基因工程进展状况。     

Quantitative trait loci for grain quality, productivity, morphological and agronomical traits in sorghum (Sorghum bicolor L. Moench)

 Quantitative trait loci (QTLs) for grain quality, yield components and other traits were investigated in two Sorghum caudatum×guinea recombinant inbred line (RIL) populations. A total of 16 traits were evaluated (plant height, panicle length, panicle compactness, number of kernels/panicle, thousand-kernel weight, kernel weight/panicle, threshing percentage, dehulling yield, kernel flouriness, kernel friability, kernel hardness, amylose content, protein content, lipid content, germination rate and molds during germination and after harvest) and related to two 113- and 100-point base genetic maps using simple (SIM) and composite (CIM) interval mapping. The number, effects and relative position of QTLs detected in both populations were generally in agreement with the distributions, heritabilities and correlations among traits. Several chromosomal segments markedly affected multiple traits and were suspected of harbouring major genes. The positions of these QTLs are discussed in relation to previously reported studies on sorghum and other grasses. Many QTLs, depending on their relative effects and position, could be used as targets for marker-assisted selection and provide an opportunity for accelerating breeding programmes. Received: 14 February 1998 / Accepted: 4 March 1998     

Genetic diversity and its relationship to hybrid performance in maize as revealed by RFLP and AFLP markers

 The challenge to maize breeders is to identify inbred lines that produce highly heterotic hybrids. In the present study we surveyed genetic divergence among 13 inbred lines of maize using DNA markers and assessed the relationship between genetic distance and hybrid performance in a diallel set of crosses between them. The parental lines were assayed for DNA polymorphism using 135 restriction fragment length polymorphisms (RFLPs) and 209 amplified-fragment polymorphisms (AFLPs). Considerable variation among inbreds was detected with RFLP and AFLP markers. Moreover AFLPs detect polymorphisms more efficiently in comparison to RFLPs, due to the larger number of loci assayed in a single PCR reaction. Genetic distances (GDs), calculated from RFLP and AFLP data, were greater among lines belonging to different heterotic groups compared to those calculated from lines of the same heterotic group. Cluster analysis based on GDs revealed associations among lines which agree with expectations based on pedigree information. The GD values of the 78 F₁ crosses were partioned into general (GGD) and specific (SGD) components. Correlations of GD with F₁ performance for grain yield were positive but too small to be of predictive value. The correlations of SGDs, particularly those based on AFLP data, with specific combining-ability effects for yield may have a practical utility in predicting hybrid performance. Received: 15 August 1997 / Accepted: 19 September 1997     

Physiologic and Yield Responses of Shaded Cotton to the Plant Growth Regulator PGR-IV

The plant growth regulator PGR-IV has been reported to improve the growth, boll retention, and yield of cotton (Gossypium hirsutum L.) under optimum growing conditions. However, little is known about the response of cotton to PGR-IV under low light stress. A 3-year field study was conducted to determine if applying PGR-IV before an 8-day period of shade (63% light reduction) benefitted the growth and yield of shaded cotton. Shading during early squaring did not affect yield. Shading after the first flower stage significantly increased leaf chlorophyll concentration and fruit abscission and decreased the leaf photosynthetic rate, nonstructural carbohydrate concentrations, and lint yield. Foliar application of PGR-IV at 292 mL ha⁻¹ at early squaring and first flower did not improve the leaf photosynthetic rate of shaded cotton. However, shaded plants receiving PGR-IV had higher nonstructural carbohydrate concentrations in the floral buds and significantly lower fruit abscission than the shaded plants without PGR-IV. Applying PGR-IV to the foliage before shading resulted in a numeric increase (6–18%) in lint yield compared with shaded plants without PGR-IV. The decreased fruit abscission from the application of PGR-IV was associated with improved assimilate translocation. The yield enhancement from foliar application of PGR-IV was attributed to increased fruit retention. However, the average boll weight of shaded plants with PGR-IV tended to be lower than that of shaded plants without PGR-IV. Lint percentage was not affected by PGR-IV. Foliar application of PGR-IV appears beneficial for increasing the fruit retention of shaded cotton. Received June 12, 1997; accepted January 19, 1998     

氨基酸微素络合物对水稻的生物效应初探

为了配制氨基酸金属络合肥,使用其主组分进行初步田间对比试验,结果表明：氨基酸微素络合物能明显提高水稻根系活力,缩短从秧田到大田的适应期,促进植株生长,改善库源关系,增加干粒重和谷秆比,从而有效提高产量。以（ＦｅＣｕＺｎ）ＡＡ２增产效果最好,达２１．２９％,蘸根及喷施是有效施用方式。     

Influence of pyrolysis condition on switchgrass bio-oil yield and physicochemical properties

The poor and inconsistent physicochemical properties of bio-oil are inhibiting its industrialized production. We investigated the variability in properties of switchgrass bio-oil produced at three pyrolysis temperatures (T = 450, 500, and 550 °C) and three feedstock moisture contents (MC = 5%, 10%, and 15%) in a 3 × 3 factorial experiment in order to exploit opportunities to improve bio-oil properties through optimization of pyrolysis parameters. Results showed that even with the single type of feedstock and pyrolysis system, the two main factors and their interaction caused large variations in bio-oil yield and most of the measured physicochemical properties. Following improvements of bio-oil properties could be individually achieved by selecting an optimal pyrolysis condition (shown in parenthesis) comparing with the worst case: increase of bio-oil yield by more than twofold (MC = 10%, T = 450 °C), increase of pH by 20.4% from 2.74 to 3.3 (MC = 10%, T = 550 °C), increase of higher heating value by 18.1% from 16.6 to 19.6 MJ/kg (MC = 10%, T = 450 °C), decrease of density by 5.9% from 1.18 to 1.11 g/cm³ (MC = 5%, T = 550 °C), decrease of water content by 36% from 31.4 to 20.1 wt.% (MC = 5%, T = 450 °C), decrease of viscosity by 40% from 28.2 to 17 centistokes (MC = 5%, T = 550 °C), decrease of solid content by 57% from 2.86 to 1.23 wt.% (MC = 15%, T = 550 °C), and decrease of ash content by 41.9% from 0.62 to 0.36 wt.% (MC = 15%, T = 550 °C). There is no single, clear-cut optimal condition that can satisfy the criteria for a bio-oil product with all the desired properties. Trade-offs should be balanced according to the usage of the end-products.     

Variability in reproductive traits in Jatropha curcas L. accessions during early developmental stages under warm subtropical conditions

Variability in floral, fruit, and seed characteristics, and oil content of 15 accession of Jatropha curcas during early development were assessed during two flowering periods in south Florida subtropical climate. The two flowering periods had leaf flushing in March. Field evaluation using 18 quantitative traits showed significant variation among accessions. The number of female flowers and female : male flower ratio ranged from 1 to 15 and 1 : 8.8 to 1 : 67.8, respectively. Fruit set by natural pollination was 89 and 66% during the first (1st) and second (2nd) flowering periods, respectively. A higher number of female‐type inflorescences were observed during summer. There were significant differences in seed traits, except for number of seeds per fruit. Accession TREC 31 had the highest individual seed dry weight and 100‐seed weight (0.83 g and 79.7 g, respectively). The oil content varied from 19.30% to 35.62%. Seed dry weight had positive correlation with seed fresh weight, seed length, seed thickness, seed width, and 100‐seed weight, but negative correlation with oil content. Based on the cluster analysis using 15 morphological traits, jatropha accessions were grouped into five main clusters and accessions from different geographic regions grouped together in a cluster. Principal component analyses (PCA) revealed morphological variation. The first three components explained 73.5% of the total variation and seed dry weight, 100‐seed weight, total flowers per inflorescence, male flowers per inflorescence and fruit set can be used to distinguish accessions. The PCA also indicated that flowering traits were more influenced by seed origin while seed traits were affected by flowering spans. Although evaluations were performed in plants during the juvenile phase, accessions TREC 31 and TREC 55 had superior averages for almost all characters evaluated. These results provide a preliminary assessment of the high variability in jatropha accessions evaluated and their potential for use in breeding and genetic improvement programs.     

施氮肥和钙肥对烤烟根系形态、生理代谢及产量的影响

为了解氮肥和钙肥对烤烟(Nicotiana tabacum)生长的影响,对成熟期烤烟的根系形态、生理代谢指标和产量进行了研究。结果表明,与施0.12 g kg^-1氮相比,施0.20 g kg^-1氮的烤烟根系最长侧根长、根系体积、根干重、叶干重和可溶性蛋白质含量均极显著升高,MDA含量极显著下降,SOD活性显著下降,但对侧根数、CAT活性和O₂^·的影响均不显著。施钙0.40 g kg^-1,根系体积、侧根数、CAT和SOD活性以及可溶性蛋白质含量均比对照提高,MDA含量和O₂^·则降低;施钙1.00 g kg^-1,最长侧根长、根干重和叶干重均提高。氮×钙互作对烤烟的最长侧根长、根系体积、根干重、叶干重和生理代谢指标的影响均极显著,但对侧根数的影响不显著。因此,施0.20 g kg^-1氮和0.40 g kg^-1钙能最大限度地改善烤烟根系形态、生理状况及提高产量。