Graft copolymerization of ethylacrylate onto xanthan gum, using potassium peroxydisulfate as an initiator

Graft copolymer of xanthan gum (XG) and ethylacrylate (EA) has been synthesized by free radical polymerization using potassium peroxydisulfate (KPS) as an initiator in an air atmosphere. The grafting parameters, i.e. grafting ratio and efficiency decrease with increase in concentration of xanthan gum from 0.050 mg/25 mL to 0.350 mg/25 mL, but these grafting parameters increase with increase in concentration of ethylacrylate from 9 × 10⁻² to 17 × 10⁻² ML⁻¹, and KPS from 15 × 10⁻³ to 35 × 10⁻³ ML⁻¹. The graft copolymer has been characterized by FTIR, XRD, TGA and SEM analysis. The grafted copolymer was also evaluated as efficient Zn²⁺ metal binder. The grafted copolymer shows improvement in the stability, solubility as well as their sorbing capacity. Thus graft copolymer formed could find applications in metal ion removal and in drug delivery.     

Direct utilization of lactose in clarified cheese whey for xanthan gum synthesis byXanthomonas campestris

Summary A derivative ofXanthomonas campestris B1459 was constructed that utilizes lactose in clarified cheese whey for xanthan gum synthesis. Genes conferring lactose utilization carried by transposon Tn951 were inserted into the bacterial chromosome. The ability to use lactose for xanthan gum synthesis was stably inherited and the amount of xanthan produced suggested carbohydrate conversion efficiencies similar to wild-typeX. campestris growing in the presence of glucose. Bench-scale fermentation of this organism and identification of the optimal whey sources and pretreatments can now proceed.     

Application of conductivity studies and polyelectrolyte theory to the conformation and order-disorder transition of xanthan polysaccharide

The conductivity of xanthan (extracellular polysaccharide from Xanthomonas campestris) in the potassium salt form has been studied over the temperature range 5–80°C spanning the order-disorder conformational transition. In salt-free solution data analysis using Manning's polyelectrolyte-conductivity theory gives a charge spacing, b, of 0.58±0.04 nm for the low temperature ordered form, consistent with a single rather than a double helix (b=0.58 and 0.29 nm respectively). In solutions with 0.01 M added KBr the increase in counterion condensation on conformational ordering is found from conductivity studies to be — ^–1= 0.20 ± 0.02, in good agreement with the value 0.20±0.02 using polyelectrolyte-equilibrium theory for the variation of transition-midpoint temperature with added salt determined from opticalrotation data.     

Genetic and molecular analysis of a cluster of rpf genes involved in positive regulation of synthesis of extracellular enzymes and polysaccharide in Xanthomonas campestris pathovar campestris

Summary The cosmid clone. pIJ3020 containing DNA from the plant pathogenic bacterium Xanthomonas campestris pathovar campestris has previously been shown to complement a non-pathogenic mutant defective in synthesis of extracellular enzymes. The DNA cloned in pIJ3020 was analysed by mutagenesis with Tn5 and Tn5lac and by nucleotide sequencing. The results indicate that this region of the genome contains a cluster of genes, mutation in any of which results in failure of the enzymes and extracellular polysaccharide to be synthesized. The designation rpf (regulation of pathogenicity factors) is proposed for these genes. The nucleotide sequence of one gene (rpfC) predicts a protein product with homology to conserved domains of both sensor and regulator proteins of prokaryotic two-component regulatory systems, which are usually involved in regulating gene expression in response to environmental stimuli.     

Physicochemical and structural characterization of a polyionic matrix of interest in biotechnology, in the pharmaceutical and biomedical fields

This paper reports on the swelling degree and the rheological and structural characteristics of a hydrogel composed by chitosan and xanthan. The latter is a polyionic hydrogel obtained by complexation between the both polysaccharides. The swelling degree has been found to be influenced by the time of coacervation, the pH of the solution of chitosan used to form the hydrogel and the pH of the swelling solution. The molecular weight and the degree of acetylation of the chitosan also influence the swelling degree of this matrix. The connectivity between chitosan and xanthan affects the swelling degree of this matrix. A rheological study has been carried out in order to understand the formation of the coacervate and of the subsequent hydrogel. The evolution of the storage modulus with time during the coacervation has allowed to optimize the time of coacervation required for a subsequently hydrogel, with desirable swelling degree. The kinetics has shown that (a) the coacervate is formed in two distinct steps and (b) the storage modulus of the hydrogel reaches a stable plateau. The values of the storage modulus have been correlated with the swelling degree. The microscopic characterization has shown the presence of a porous network with a fibrillar structure. To complete the characterization studies fine powder of this hydrogel has been used to determine the surface, perimeter, Feret diameter and sphericity factor distribution of dry and hydrated (swollen) particles.     

Xanthan gum: an economical substitute for agar in plant tissue culture media

Xanthan gum, a microbial desiccation-resistant polysaccharide prepared commercially by aerobic submerged fermentation from Xanthomonas campestris, has been successfully used as a solidifying agent for plant tissue culture media. Its suitability as a substitute to agar was demonstrated for in vitro seed germination, caulogenesis and rhizogenesis of Albizzia lebbeck, androgenesis in anther cultures of Datura innoxia, and somatic embryogenesis in callus cultures of Calliandra tweedii. Culture media used for eliciting these morphogenic responses were gelled with either 1% xanthan gum or 0.9% agar. Xanthan gum, like agar, supported all these responses.     

Operating bioreactors for microbial exopolysaccharide production

There is considerable interest in exploiting the novel physical and biological properties of microbial exopolysaccharides in industry and medicine. For economic and scientific reasons, large scale production under carefully monitored and controlled conditions is required. Producing exopolysaccharides in industrial fermenters poses several complex bioengineering and microbiological challenges relating primarily to the very high viscosities of such culture media, which are often exacerbated by the producing organism’s morphology. What these problems are, and the strategies for dealing with them are discussed critically in this review, using pullulan, curdlan, xanthan, and fungal β-glucans as examples of industrially produced microbial exopolysaccharides. The role of fermenter configuration in their production is also examined.     

Impact of the extrusion process on xanthan gum behaviour

Processing xanthan gum by extrusion and subsequent drying produces a biopolymer showing particulate, rather than molecular behaviour in aqueous solution. This form of xanthan disperses very readily to give a viscosity that is strongly dependent on salt concentration. On heating above the temperature of the order-disorder transition as determined by calorimetry, there is a viscosity transition that is indicative of the irreversible loss of the particulate structure. It is suggested that the extrusion process melts and aligns xanthan macromolecules. On cooling reordering will occur but in the highly concentrated environment in the extruder ( approximately 45% water w/w), inter-molecular association between neighbouring macromolecules cannot proceed to completion due to kinetic trapping. As a consequence a network structure is created maintained by associations involving ordered regions. A xanthan solution can be prepared from this particulate material by dispersing and subsequent heating far more readily than can be achieved with non-processed xanthan.     

Xanthan is not essential for pathogenicity in citrus canker but contributes to<Emphasis Type="Italic"> Xanthomonas</Emphasis> epiphytic survival

Xanthan-deficient mutants of Xanthomonas axonopodis pv. citri, the bacterium responsible for citrus canker, were generated by deletion and marker exchange of the region encoding the carboxy-terminal end of the first glycosyltransferase, GumD. Mutants of gumD did not produce xanthan and remained pathogenic in citrus plants to the same extent as wild-type bacteria. The kinetics of appearance of initial symptoms, areas of plant material affected, and growth of bacteria inside plant tissue throughout the disease process were similar for both wild-type and mutant inoculations. Moreover, exopolysaccharide deficiency did not impair the ability of the bacteria to induce hypersensitive response on non-host plants. Apart from variations in phenotypic aspects, no differences in growth or survival under different stress conditions were observed between the xanthan-deficient mutant and wild-type bacteria. However, gumD mutants displayed impaired survival under oxidative stress during stationary phase as well as impaired epiphytic survival on citrus leaves. Our results suggest that xanthan does not play an essential role in citrus canker at the initial stages of infection or in the incompatible interactions between X. axonopodis pv. citri and non-host plants, but facilitates the maintenance of bacteria on the host plant, possibly improving the efficiency of colonization of distant tissue.