Effect of impeller type and stirring frequency on the behavior of an AnSBBR in the treatment of low-strength wastewater

The influence of impeller type and stirring frequency on the performance of a mechanically stirred anaerobic sequencing batch reactor containing immobilized biomass on an inert support (AnSBBR - Anaerobic Sequencing Batch Biofilm Reactor) was evaluated. The biomass was immobilized on polyurethane foam cubes placed in a stainless-steel basket inside a glass cylinder. Each 8-h batch run consisted of three stages: feed (10 min), reaction (460 min) and discharge (10 min) at 30 °C. Experiments were performed with four impeller types, i.e., helical, flat-blade, inclined-blade and curved-blade turbines, at stirring frequencies ranging from 100 to 1100 rpm. Synthetic wastewater was used in all experiments with an organic-matter concentration of 530 ± 37 mg/L measured as chemical oxygen demand (COD). The reactor achieved an organic-matter removal efficiency of around 87% under all investigated conditions. Analysis of the four impeller types and the investigated stirring frequencies showed that mass transfer in the liquid phase was affected not only by the applied stirring frequency but also by the agitation mode imposed by each impeller type. The best reactor performance at all stirring frequencies was obtained when agitation was provided by the flat-blade turbine impeller.     

Green and sustainable route for oxidative depolymerization of lignin: New platform for fine chemicals and fuels

Depolymerization of lignin biomass to its value-added chemicals and fuels is pivotal for achieving the goals for sustainable society, and therefore has acquired key interest among the researchers worldwide. A number of distinct approaches have evolved in literature for the deconstruction of lignin framework to its mixture of complex constituents in recent decades. Among the existing practices, special attention has been devoted for robust site selective chemical transformation in the complex structural frameworks of lignin. Despite the initial challenges over a period of time, oxidation and oxidative cleavage process of aromatic building blocks of lignin biomass toward the fine chemical synthesis and fuel generation has improved substantially. The development has improved in terms of cost effectiveness, milder reaction conditions, and purity of compound individuals. These aforementioned oxidative protocols mainly involve the breaking of C-C and C-O bonds of complex lignin frameworks. More precisely in the line with environmentally friendly greener approach, the catalytic oxidation/oxidative cleavage reactions have received wide spread interest for their mild and selective nature toward the lignin depolymerization. This mini-review aims to provide an overview of recent developments in the field of oxidative depolymerization of lignin under greener and environmentally benign conditions. Also, these oxidation protocols have been discussed in terms of scalability and recyclability as catalysts for different fields of applications.     

Biomass yield in a genetically diverse Miscanthus sacchariflorus germplasm panel phenotyped at five locations in Asia,North America,and Europe

Miscanthus is a high-yielding bioenergy crop that is broadly adapted to temperate and tropical environments. Commercial cultivation of Miscanthus is predominantly limited to a single sterile triploid clone of Miscanthus × giganteus, a hybrid between Miscanthus sacchariflorus and M. sinensis. To expand the genetic base of M. × giganteus, the substantial diversity within its progenitor species should be used for cultivar improvement and diversification. Here, we phenotyped a diversity panel of 605 M. sacchariflorus from six previously described genetic groups and 27 M. × giganteus genotypes for dry biomass yield and 16 yield-component traits, in field trials grown over 3 years at one subtropical location (Zhuji, China) and four temperate locations (Foulum, Denmark; Sapporo, Japan; Urbana, Illinois; and Chuncheon, South Korea). There was considerable diversity in yield and yield-component traits among and within genetic groups of M. sacchariflorus, and across the five locations. Biomass yield of M. sacchariflorus ranged from 0.003 to 34.0 Mg ha⁻¹ in year 3. Variation among the genetic groups was typically greater than within, so selection of genetic group should be an important first step for breeding with M. sacchariflorus. The Yangtze 2x genetic group (=ssp. lutarioriparius) of M. sacchariflorus had the tallest and thickest culms at all locations tested. Notably, the Yangtze 2x genetic group's exceptional culm length and yield potential were driven primarily by a large number of nodes (>29 nodes culm⁻¹ average over all locations), which was consistent with the especially late flowering of this group. The S Japan 4x, the N China/Korea/Russia 4x, and the N China 2x genetic groups were also promising genetic resources for biomass yield, culm length, and culm thickness, especially for temperate environments. Culm length was the best indicator of yield potential in M. sacchariflorus. These results will inform breeders' selection of M. sacchariflorus genotypes for population improvement and adaptation to target production environments.     

Crown development in a pioneer tree, Rhus trichocarpa, in relation to the structure and growth of individual branches

Based on an allometric reconstruction, the structure and biomass-allocation patterns of branches and current-year shoots were investigated in branches of various heights in the pioneer tree Rhus trichocarpa, to evaluate how crown development is achieved and limited in association with height. Path analysis was conducted to explore the effects of light availability, basal height and size of individual branches on branch structure and growth. Branch angle was affected by basal height, whereas branch mass was influenced primarily by light availability. This result suggests that branch structure is strongly constrained by basal height, and that trees mediate such constraints under different light environments. Previous-year leaf area and light availability showed positive effects on current-year stem mass. In contrast, branch basal height and mass negatively affected current-year stem mass. Moreover, the length of stems of a given diameter decreased with increasing branch height. Therefore the cost of biomass investment for a unit growth in length is greater for branches of larger size and at upper positions. Vertical growth rate in length decreased with increasing height. Height-dependent changes in stem allometry and angle influenced the reduction in vertical growth rate to a similar degree.     

Advances in modifying lignin structures for largely enhancing high-lignin biomass saccharification

Traditional chemical treatments require high energy and concentrated agents to decrease high-lignin biomass recalcitrance during lignin removal. A low-cost and environment-friendly method via modifying the lignin structure without lignin degradation overcomes lignin barrier in wood-feeding termites. In this study, thermal hydroxyl radicals in the biomimetic system performed in high-lignin cassava stillage residues did not reduce total lignin level but altered the lignin monostructure. The major β-O-4′ remained conserved, whereas hydroxylation and modification of selective intermonomer side-chain linkages occurred in the treated lignin. The treatment can enhance enzymatic saccharification with cellulose conversion of cassava stillage residues at 97%, twice higher than that of the control. In addition, the modified lignin exhibited low invalid adsorption capacity into commercial cellulases, thereby improving the performance of cellulosic feedstock. Modifying the lignin structure, instead of removing lignin, provides new insights for development of novel treatments for high-lignin biomass.     

Bacterial growth kinetics estimation by fluorescence in situ hybridization and spectrofluorometric quantification

AIMS: The aim of this study was to develop a specific and rapid method to identify and quantify relevant bacterial populations in mixed biomass by spectrofluorometric quantification (SQ) of whole cells hybridized with fluorescently labelled oligonucleotide probes targeting mature 16S ribosomal RNA (rRNA). Probe targeting the precursor of rRNA synthesis was also employed because it was being suggested as more indicative of the activity state of the micro-organisms. METHODS AND RESULTS: Original fluorescence in situ hybridization protocol was modified to be applied to liquid samples and the fluorescence emission from the Cy3-labelled cells was measured by spectrofluorometry. The method was calibrated on an exponentially growing cell suspension of Acinetobacter johnsonii and was successfully applied to generate kinetic data. No substantial difference in the estimated maximum specific growth rate (mu(max)) values was found between the SQ method and the classical method, using absorbance at 420 nm (6.2 d(-1)). The preliminary validation tests showed their direct applicability to target enriched cultures. CONCLUSIONS: This study demonstrated the validity of the SQ method to easily quantify the concentration and to determine the growth rate of specific micro-organisms present in mixed cultures. SIGNIFICANCE AND IMPACT OF THE STUDY: The proposed method can be directly utilized for quantification and kinetic characterization of microbial enrichments. It has the advantage of being easily applicable using simple, inexpensive equipment suitable for routine analysis.     

Domestication and crop physiology: roots of green-revolution wheat

BACKGROUND AND AIMS: Most plant scientists, in contrast to animal scientists, study only half the organism, namely above-ground stems, leaves, flowers and fruits, and neglect below-ground roots. Yet all acknowledge roots are important for anchorage, water and nutrient uptake, and presumably components of yield. This paper investigates the relationship between domestication, and the root systems of landraces, and the parents of early, mid- and late green-revolution bread wheat cultivars. It compares the root system of bread wheat and 'Veery'-type wheat containing the 1RS translocation from rye. METHODS: Wheat germplasm was grown in large pots in sand culture in replicated experiments. This allowed roots to be washed free to study root characters. KEY RESULTS: The three bread wheat parents of early green-revolution wheats have root biomass less than two-thirds the mean of some landrace wheats. Crossing early green-revolution wheat to an F(2) of 'Norin 10' and 'Brevor', further reduced root biomass in mid-generation semi-dwarf and dwarf wheats. Later-generation semi-dwarf wheats show genetic variation for root biomass, but some exhibit further reduction in root size. This is so for some California and UK wheats. The wheat-rye translocation in 'Kavkaz' for the short arm of chromosome 1 (1RS) increased root biomass and branching in cultivars that contained it. CONCLUSIONS: Root size of modern cultivars is small compared with that of landraces. Their root system may be too small for optimum uptake of water and nutrients and maximum grain yield. Optimum root size for grain yield has not been investigated in wheat or most crop plants. Use of 1RS and similar alien translocations may increase root biomass and grain yield significantly in irrigated and rain-fed conditions. Root characters may be integrated into components of yield analysis in wheat. Plant breeders may need to select directly for root characters.