非线性映射和聚类分析在中风病证候分类中的应用

本文用非线性映射和聚类分析方法,给出了中风病的四个类型,为中风病的证候分类提供了分析方法和信息．     

辽河三角洲湿地的景观破碎化分析

利用遥感、ＧＩＳ手段对辽河三角洲的湿地景观进行研究,并选用６种不同的方法对研究区的景观破碎化程度进行分析．结果表明,研究区的景观破碎化程度较低,总体斑块密度为０．２８６个·ｋｍ－２,廊道密度为１．０９８ｋｍ·ｋｍ－２,聚集度指数为０．９５５．景观破碎化与人类活动密切相关,随着人类活动的增加,景观破碎化程度加深．廊道景观的发展是景观破碎化的前提与动因．     

The role of active oxygen in iron tolerance of rice (Oryza sauva L.)

Summary Iron tolerance of rice (Oryza sativa L.) was investigated using an oxygen depleted hydroculture system. Treatment with high concentrations of Fe²⁺ induced yellowing and bronzing symptoms as well as iron coatings at the root surface. Root and shoot growth were inhibited by increasing iron concentration in the medium. All symptoms were more pronounced in an iron sensitive cultivar (IR 64) compared to an iron tolerant one (IR 9764-45-2). Superoxide dismutase and peroxidase activity of root extracts of IR 97 were about twice that of IR 64 in untreated control plants. No significant increase of peroxidase activity was detected with increasing iron concentration in the medium. Catalase activity of IR 64 was slightly higher than that of IR 97, independent of iron concentration.Abbreviations SOD Superoxide dismutase (EC 1.15.1.1) - POD peroxidase (EC 1.11.1.7) - EDTA ethylenediamintetraacetic acid - fwt fresh weight - Hepes (N-[2-hydroxyethyl]piperazine-N-[2-ethanesulfonic acid]) - BSA bovine serum albumin - IR 97 IR 9764-45-2 an iron tolerant rice cultivar - IR 64 iron sensitive rice cultivar - PM plasma membrane     

Characterization of quantitative trait loci (QTLs) in cultivated rice contributing to field resistance to sheath blight (Rhizoctonia solani)

Sheath blight, caused by Rhizoctonia solani, is one of the most important diseases of rice. Despite extensive searches of the rice germ plasm, the major gene(s) which give complete resistance to the fungus have not been identified. However, there is much variation in quantitatively inherited resistance to R. solani, and this type of resistance can offer adequate protection against the pathogen under field conditions. Using 255 F₄ bulked populations from a cross between the susceptible variety Lemont and the resistant variety Teqing, 2 years of field disease evaluation and 113 well-distributed RFLP markers, we identified six quantitative trait loci (QTLs) contributing to resistance to R. solani. These QTLs are located on 6 of the 12 rice chromosomes and collectively explain approximately 60% of the genotypic variation or 47% of the phenotypic variation in the LemontxTeqing cross. One of these resistance QTLs (QSbr4a), which accounted for 6% of the genotypic variation in resistance to R. solani, appeared to be independent of associated morphological traits. The remaining five putative resistance loci (QSbr2a, QSbr3a, QSbr8a, QSbr9a and QSbr12a) all mapped to chromosomal regions also associated with increased plant height, three of which were also associated with QTLs causing later heading. This was consistent with the observation that heading date and plant height accounted for 47% of the genotypic variation in resistance to R. solani in this population. There were also weak associations between resistance to R. solani and leaf width, which were likely due to linkage with a QTL for this trait rather than to a physiological relationship.     

Maximum-likelihood models for mapping genetic markers showing segregation distortion. 2. F2 populations

In F₂ populations, gametic and zygotic selection may affect the analysis of linkage in different ways. Therefore, specific likelihood equations have to be developed for each case, including dominant and codominant markers. The asymptotic bias of the classical estimates are derived for each case, in order to compare them with the standard errors of the suggested estimates. We discuss the utility and the efficiency of a previous model developed for dominant markers. We show that dominant markers provide very poor information in the case of segregation distortion and, therefore, should be used with circumspection. On the other hand, the estimation of recombination fractions between codominant markers is less affected by selection than is that for dominant markers. We also discuss the analysis of linkage between dominant and codominant markers.     

Molecular cloning,characterization and expression analysis of two catalase isozyme genes in barley

Clones representing two distinct barley catalase genes, Cat1 and Cat2, were found in a cDNA library prepared from seedling polysomal mRNA. Both clones were sequenced, and their deduced amino acid sequences were found to have high homology with maize and rice catalase genes. Cat1 had a 91% deduced amino acid sequence identity to CAT-1 of maize and 92% to CAT B of rice. Cat2 had 72 and 79% amino acid sequence identities to maize CAT-2 and-3 and 89% to CAT A of rice. Barley, maize or rice isozymes could be divided into two distinct groups by amino acid homologies, with one group homologous to the mitochondria-associated CAT-3 of maize and the other homologous to the maize peroxisomal/glyoxysomal CAT-1. Both barley CATs contained possible peroxisomal targeting signals, but neither had favorable mitochondrial targeting sequences. Cat1 mRNA occurred in whole endosperms (aleurones plus starchy endosperm), in isolated aleurones and in developing seeds, but Cat2 mRNA was virtually absent. Both mRNAs displayed different developmental expression patterns in scutella of germinating seeds. Cat2 mRNA predominated in etiolated seedling shoots and leaf blades. Barley genomic DNA contained two genes for Cat1 and one gene for Cat2. The Cat2 gene was mapped to the long arm of chromosome 4, 2.9 cM in telomeric orientation from the mlo locus conferring resistance to the powdery mildew fungus (Erysiphe graminis f.sp. hordei).     

Determination of the disulfide bond pairings in human tissue factor pathway inhibitor purified fromEscherichia coli

The disulfide bond assignments of human alanyl tissue factor pathway inhibitor purified fromEscherichia coli have been determined. This inhibitor of the extrinsic blood coagulation pathway possesses three Kunitz-type inhibitor domains, each containing three disulfide bonds. The disulfide bond pairings in domains 1 and 3 were determined by amino acid sequencing and mass spectrometry of peptides derived from a thermolysin digest. However, thermolysin digestion did not cleave any peptide bonds within domain 2. The disulfide bond pairings in domain 2 were determined by isolating it from the thermolysin treatment and subsequently cleaving it with pepsin and trypsin into peptides which yielded the three disulfide bond pairings in this domain. These results demonstrate that the disulfide pairings in each of the three domains of human tissue factor pathway inhibitor purified fromEscherichia coli are homologous to each other and also to those in bovine pancreatic trypsin inhibitor.     

Intrachain disulfide bond in the core hinge region of human IgG4.

IgG is a tetrameric protein composed of two copies each of the light and heavy chains. The four-chain structure is maintained by strong noncovalent interactions between the amino-terminal half of pairs of heavy-light chains and between the carboxyl-terminal regions of the two heavy chains. In addition, interchain disulfide bonds link each heavy-light chain and also link the paired heavy chains. An engineered human IgG4 specific for human tumor necrosis factor-alpha (CDP571) is similar to human myeloma IgG4 in that it is secreted as both disulfide bonded tetramers (approximately 75% of the total amount of IgG) and as tetramers composed of nondisulfide bonded half-IgG4 (heavy chain disulfide bonded to light chain) molecules. However, when CDP571 was genetically engineered with a proline at residue 229 of the core hinge region rather than serine, CDP571 (S229P), or with an IgG1 rather than IgG4 hinge region, CDP571(gamma 1), only trace amounts of nondisulfide bonded half-IgG tetramers were observed. Trypsin digest reversephase HPLC peptide mapping studies of CDP571 and CDP571(gamma 1) with on-line electrospray ionization mass spectroscopy supplemented with Edman sequencing identified the chemical factor preventing inter-heavy chain disulfide bond formation between half-IgG molecules: the two cysteines in the IgG4 and IgG1 core hinge region (CPSCP and CPPCP, respectively) are capable of forming an intrachain disulfide bond. Conformational modeling studies on cyclic disulfide bonded CPSCP and CPPCP peptides yielded energy ranges for the low-energy conformations of 31-33 kcal/mol and 40-42 kcal/mol, respectively. In addition, higher torsion and angle bending energies were observed for the CPPCP peptide due to backbone constraints caused by the extra proline. These modeling results suggest a reason why a larger fraction of intrachain bonds are observed in IgG4 rather than IgG1 molecules: the serine in the core hinge region of IgG4 allows more hinge region flexibility than the proline of IgG1 and thus may permit formation of a stable intrachain disulfide bond more readily.