Biohydrogen from thermophilic co-fermentation of swine manure with fruit and vegetable waste: maximizing stable production without pH control

Hydrogen production by dark fermentation may suffer of inhibition or instability due to pH deviations from optimality. The co-fermentation of promptly degradable feedstock with alkali-rich materials, such as livestock wastes, may represent a feasible and easy to implement approach to avoid external adjustments of pH.Experiments were designed to investigate the effect of the mixing ratio of fruit-vegetable waste with swine manure with the aim of maximizing biohydrogen production while obtaining process stability through the endogenous alkalinity of manure.Fruit-vegetable/swine manure ratio of 35/65 and HRT of 2 d resulted to give the highest production rate of 3.27 ± 0.51 L_H2 L⁻¹ d⁻¹, with a corresponding hydrogen yield of 126 ± 22 mL_H2 g⁻¹_VS-added and H₂ content in the biogas of 42 ± 5%. At these operating conditions the process exhibited also one of the highest measured stability, with daily productions deviating for less than 14% from the average.     

Effect of water extraction on sugars recovery from steam exploded olive tree pruning

Biomass of olive tree pruning can be considered a suitable raw material for the production of ethanol due to its high content of potentially fermentable carbohydrates. However its high extractives content could cause condensation reactions between extractives and acid insoluble lignin during pretreatment, hindering the enzymatic hydrolysis of pretreated material. In this work, the effect of extractives removal before steam explosion of olive tree pruning was evaluated. The objectives are to recover as much glucose as possible in the extraction stage and to avoid the condensation reactions. The effect of temperature and time of water extracted material on sugars recovery was studied using a response surface method according to a central composite design. Extractive removal previous to steam explosion resulted in 20% more total sugars recovery in comparison to a material without water extraction stage.     

Kinetics of the pyrolytic and hydrothermal decomposition of water hyacinth

The kinetics of water hyacinth decomposition using pyrolysis and hydrothermal treatment was compared. With pyrolysis, initial vaporization occurred at 453 K as determined by thermogravimetric analysis, while initial solubilisation occurred at 433 K with subcritical hydrothermal treatment. The “kinetic triplet” was determined for the ranges of 423-483 K (range I) and 473-553 K (range II) using the Coats-Redfern method for both treatments. The calculated activation energies for ranges I and II were 110 and 116 kJ/mol for conventional pyrolysis and 145 and 90 kJ/mol for hydrothermal treatment. The similar activation energies for the two temperature ranges observed for pyrolysis implied that only hemicellulose decomposition occurred. For hydrothermal treatment, both hemicellulose and cellulose decomposition occurred in temperature range II, in which a notable lower activation energy was observed. This implied hydrothermal treatment was more suitable for conversion lignocellulosic biomass under these conditions.     

Implications of corn prices on water footprints of bioethanol

Previously reported water footprints (WFPs) of corn ethanol have been estimated based on the assumption that corn ethanol feedstock could be supplied by the same states where the corn is grown. However, ethanol conversion facilities may choose out-of-state feedstock suppliers depending on the total price of feedstock they have to pay including both the corn price and transportation costs. The purpose of this study is to evaluate the WFPs and total water use (TWU) of corn ethanol considering an optimal allocation of corn with heterogeneous corn feedstock prices across states. The results show that the WFPs of corn ethanol are less than 100 l of water per liter of ethanol (Lw/Le) for all ethanol-producing states based on both the 2008 corn price and transportation costs for rail and truck. Results also reveal that WFPs are very sensitive to the market price of corn and that additional greenhouse gas emissions due to corn trade between states are not significant.     

Fiber surface characterization of old newsprint pulp deinked by combining hemicellulase with laccase-mediator system

Deinking of old newsprint (ONP) by combining hemicellulase with laccase-mediator system (LMS) was investigated, and surface chemical composition and fiber morphology changes during the deinking process were studied by electron spectroscopy for chemical analysis (ESCA), contact angle (CA), attenuated total reflectance fourier transform infrared spectrometry (ATR-FTIR), fiber quality analyzer (FQA), and environmental scanning electronic microscopy (ESEM). Results showed that, compared to the pulp deinked with hemicellulase or LMS individually, effective residual ink concentration (ERIC) was lower for the hemicellulase/LMS-deinked pulp. This indicated that there is a synergistic deinking effect between hemicellulase and LMS. It was found that O/C ratio of the fiber surface increased and the surface coverage of lignin decreased during the hemicellulase/LMS deinking process. The contact angle of the hemicellulase/LMS-deinked pulp was lower than that of pulps deinked with each individual enzyme. ESEM observations showed that more fibrils appeared on the fiber surface due to synergistic treatment.     

Statistical modelling and optimization of substrate composition for bacterial growth and cadmium removal using response surface methodology

In this study, substrate composition was optimized for the growth of Achromobacter xyloxidans and biosorption of Cd(II) from aqueous solution. Response surface methodology (RSM) was used to investigate the function of three independent operating variables, namely, peptone (2.5-10 g/L), beef extract (2.5-5.0 g/L) and incubation time (24-96 h), on dependent variables, i.e. sorption of Cd(II) ions, protein content and biomass growth of A. xyloxidans. The maximum Cd(II) removal efficiency of 69.2%, protein content 1.9 mg/L and growth 0.354 optical density was found at optimal conditions of peptone 10 g/L, incubation time 60 h and beef extract 2.5 g/L. The significance of independent variables and interactions between variables were tested by means of the analysis of variance (ANOVA) with 95% confidence limits and values of “Prob > F” less than 0.0500 indicate that model terms are significant. Fourier transfer infrared (FTIR) analysis was used to investigate sorption mechanism and involved functional groups in Cd(II) binding.     

Suitable water temperature for seed storage of Zostera japonica for subtropical seagrass bed restoration

Restoration of Zostera japonica is needed. Laboratory culture experiments to know the germination characteristics might be helpful for implementation of actual restoration. As a part of germination experiments, we explored suitable water temperature for long-term storage of Z. japonica seeds. This work was based on earlier reports of Zostera marina, which presumably has similar physiological properties to Z. japonica. This study consisted of two experiments: (1) preservation experiments to investigate the fate of stored Z. japonica seeds and (2) germination experiments to investigate the germination potential of the stored seeds. The results of the preservation experiments suggested that seed condition, that is, germinated, degraded, unstable, stable, etc., showed variations between the seeds stored at 4 and 23 °C. The majority of the seeds stored at 4 °C were germinated, while those at 23 °C seemed to be degraded, presumably by bacteria and mold. The germination experiments suggested high germination potential of seeds stored at 4 °C even after 302 days had elapsed. In conclusion, including previously reported results on Z. marina, low temperature was suitable for the preservation of seeds to maintain germination potential.     

Simulation study on water quality based on sediment release flume experiment in Lake Taihu, China

Sediments have a significant influence on the overlying water, and nutrient release from sediments is an important source for lake eutrophication, particularly in shallow lakes. Sediment resuspension is primarily driven by wind-induced currents. In this research, the correlation between release rate of suspended sediment and flow velocity was studied, and an experiment on hydrodynamic forces was conducted in a rectangle flume using water and sediments collected from three sites in Lake Taihu, a eutrophic lake in China. It was shown that the starting velocities of sediment in Lake Taihu at three different incipient standards gained from the experiment were 15, 30, and 40 cm s⁻¹ and the release rate of suspended sediment could reach up to 643.4, 5377.1, and 13980.5 g m⁻² d⁻¹, respectively. Based on the experiment, a water quantity and quality numerical model of wind-induced current with sediment pollution for Lake Taihu was developed. The model was calibrated and validated by applying it to the study of the water quality of Lake Taihu. The calculated values were generally in good agreement with field observations, which indicated that the developed model could represent the dynamics of sediment resuspension to a certain extent. This study provides a new approach and a practical tool for planning and management policy and operations to protect the water quality and ecosystems of shallow lakes.     

High yield lipase-catalyzed synthesis of Engkabang fat esters for the cosmetic industry

Engkabang fat esters were produced via alcoholysis reaction between Engkabang fat and oleyl alcohol, catalyzed by Lipozyme RM IM. The reaction was carried out in a 500 ml Stirred tank reactor using heptane and hexane as solvents. Response surface methodology (RSM) based on a four-factor-five-level Central composite design (CCD) was applied to evaluate the effects of synthesis parameters, namely temperature, substrate molar ratio (oleyl alcohol: Engkabang fat), enzyme amount and impeller speed. The optimum yields of 96.2% and 91.4% were obtained for heptane and hexane at the optimum temperature of 53.9 °C, impeller speeds of 309.5 and 309.0 rpm, enzyme amounts of 4.82 and 5.65 g and substrate molar ratios of 2.94 and 3.39:1, respectively. The actual yields obtained compared well with the predicted values of 100.0% and 91.5%, respectively. Meanwhile, the properties of the esters show that they are suitable to be used as ingredient for cosmetic applications.     

Improvement of the production of a red pigment in Penicillium sp. HSD07B synthesized during co-culture with Candida tropicalis

Co-culture of Penicillium sp. HSD07B and Candida tropicalis resulted in the production of a red pigment consisting of six components as determined by TLC and HPLC. The pigment showed no acute toxicity in mice and was mot mutagenic in the Ames test. The pigment was stable between pH 2 and 10 and temperatures of 10-100 °C and exhibited good photo-stability and resistance to oxidization by hydrogen peroxide and reduction by Na₂SO₃. Glucose and ratio of C. tropicalis to strain HSD07B (w/w) in the inoculum were the important factors influencing production of the pigment. Under optimized conditions, a pigment yield of 2.75 and 7.7 g/l was obtained in a shake-flask and a 15 l bioreactor, respectively. Thus, co-culture of strain HSD07B and C. tropicalis is a promising way to produce a red pigment potentially useful for coloring applications.