A QTL on chromosome 3q23 influences processing speed in humans

Processing speed is a psychological construct that refers to the speed with which an individual can perform any cognitive operation. Processing speed correlates strongly with general cognitive ability, declines sharply with age and is impaired across a number of neurological and psychiatric disorders. Thus, identifying genes that influence processing speed will likely improve understanding of the genetics of intelligence, biological aging and the etiologies of numerous disorders. Previous genetics studies of processing speed have relied on simple phenotypes (eg, mean reaction time) derived from single tasks. This strategy assumes, erroneously, that processing speed is a unitary construct. In the present study, we aimed to characterize the genetic architecture of processing speed by using a multidimensional model applied to a battery of cognitive tasks. Linkage and QTL‐specific association analyses were performed on the factors from this model. The randomly ascertained sample comprised 1291 Mexican‐American individuals from extended pedigrees. We found that performance on all three distinct processing‐speed factors (Psychomotor Speed; Sequencing and Shifting and Verbal Fluency) were moderately and significantly heritable. We identified a genome‐wide significant quantitative trait locus (QTL) on chromosome 3q23 for Psychomotor Speed (LOD = 4.83). Within this locus, we identified a plausible and interesting candidate gene for Psychomotor Speed (Z = 2.90, P = 1.86 × 10^?03).     

Predicted threshold against forward and backward loss of balance for perturbed walking

The biomechanical mechanisms of loss of balance have been studied before for slip condition but have not been investigated for arbitrary perturbation profiles under non-slip conditions in sagittal plane. This study aimed to determine the thresholds of center of mass (COM) velocity and position relative to the base of support (BOS) that predict forward and backward loss of balance during walking with a range of BOS perturbations. Perturbations were modeled as sinusoidal BOS motions in the vertical or anterior-posterior direction or as sagittal rotation. The human body was modeled using a seven-link model. Forward dynamics alongside with dynamic optimization were used to find the thresholds of initial COM velocity for each initial COM position that would predict forward or backward loss of balance. The effects of perturbation frequency and amplitude on these thresholds were modeled based on the simulation data. Experimental data were collected from 15 able-bodied individuals and three individuals with disability during perturbed walking. The simulation results showed similarity with the stability region reported for slip and non-slip conditions. The feasible stability region shrank when the perturbation frequency and amplitude increased, especially for larger initial COM velocities. 89.5% (70.9%) and 82.4% (68.2%) of the measured COM position and velocity combinations during low (high) perturbations were located inside the simulated limits of the stability region, for able-bodied and disabled individuals, respectively. The simulation results demonstrated the effects of different perturbation levels on the stability region. The obtained stability region can be used for developing rehabilitative programs in interactive environments.     

Does the margin of stability measure predict medio-lateral stability of gait with a constrained-width base of support?

This study aimed to determine the validity of the centre of mass position (COM) position and extrapolated COM (XCOM), relative to the base of support, for predicting medio-lateral stability during a walking task where the base of support width is limited. Nine young healthy participants walked on a narrow beam. Three-dimensional motion capture was used to calculate the COM and XCOM relative to the base of support. Steps were classified as having either the COM or XCOM inside or outside the base of support, and were classified as successful (stable – foot placed on the beam) or failed (unstable – foot stepped off the beam). If the COM or XCOM are valid measures of stability, they should be within the base of support for successful steps and outside the base of support for failed steps. Classifying the COM and XCOM inside or outside the base of support correctly predicted successful or failed steps in 69% and 58% of cases, respectively. When the COM or XCOM were outside the base of support, walking faster seemed to help participants to maintain stability. The further the COM or XCOM were outside the base of support during a successful step, the more likely participants were to fail on a subsequent step. The results of this study suggest that both COM and XCOM are valid measures of stability during a beam walking task, but that classifying COM and XCOM as inside or outside the base of support may be over-simplistic.     

Mechanical understanding of hunting waves generated by killer whales

The wave wash hunting employed by Orcinus orca, also known as killer whales, is unique in that the prey is hunted outside of the water by generating waves. To quantitatively analyze the specific mechanism of the wave wash, data were obtained using computational fluid dynamics (CFD), and wave theory was introduced as the theoretical background to clarify the mechanism. The relationships between the swimming characteristics and wave parameters are defined in this paper. The results obtained by numerical investigation revealed that the wavelength increased with the swimming speed. Additionally, the wave height increased as the swimming speed increased and the swimming depth became shallower, and subsequently converged to a maximum of 2.42 m. The success of hunting is determined by two wave parameters, which indicate the intensity of the wave wash: the wave height and force exerted on the prey. The metabolic rate and the drag force are considered to evaluate the efficiency of the locomotion, which varied according to the swimming speed (V) and swimming depth (d) of the whales. To generate hunting waves efficiently, the optimal ranges of V and d were estimated to be 3 ~ 5 m/s and 0.5 m ~ 1.1 m respectively.     

Seasonal variations in the activity budget of Japanese macaques in the coniferous forest of Yakushima: effects of food and temperature

Seasonal variations in the activity budget of Japanese macaques in the coniferous forest of Yakushima were studied over the course of 1 year. On an annual basis, they spent 38% of the daytime feeding, 16% traveling, 14% in social interactions, and 32% engaged in resting. The effects of temperature and food-related factors (i.e., food distribution, feeding speed, and food abundance) on the seasonal variations of activity budget were examined by stepwise multiple regression analysis. When the temperature was low, the macaques decreased traveling and feeding time, in accordance with the prediction that endothermal animals save energy under severe thermoregulatory cost. When the feeding speed of available foods was slow, they spent more time feeding. When high-quality foods were abundant, they decreased feeding time. These macaques did not respond to fluctuations in food distribution. The present results indicate the importance of temperature, in addition to food-related factors, as a determinant of activity budgets.     

Adaptation of rainbow fish to lake and stream habitats

Fish occupy a range of hydrological habitats that exert different demands on locomotor performance. We examined replicate natural populations of the rainbow fishes Melanotaenia eachamensis and M. duboulayi to determine if colonization of low-velocity (lake) habitats by fish from high-velocity (stream) habitats resulted in adaptation of locomotor morphology and performance. Relative to stream conspecifics, lake fish had more posteriorly positioned first dorsal and pelvic fins, and shorter second dorsal fin bases. Habitat dimorphism observed between wild-caught fish was determined to be heritable as it was retained in M. eachamensis offspring raised in a common garden. Repeated evolution of the same heritable phenotype in independently derived populations indicated body shape divergence was a consequence of natural selection. Morphological divergence between hydrological habitats did not support a priori expectations of deeper bodies and caudal peduncles in lake fish. However, observed divergence in fin positioning was consistent with a family-wide association between habitat and morphology, and with empirical studies on other fish species. As predicted, decreased demand for sustained swimming in lakes resulted in a reduction in caudal red muscle area of lake fish relative to their stream counterparts. Melanotaenia duboulayi lake fish also had slower sustained swimming speeds (Ucrit) than stream conspecifics. In M. eachamensis, habitat affected Ucrit of males and females differently. Specifically, females exhibited the pattern observed in M. duboulayi (lake fish had faster Ucrit than stream fish), but the opposite association was observed in males (stream males had slower Ucrit than lake males). Stream M. eachamensis also exhibited a reversed pattern of sexual dimorphism in Ucrit (males slower than females) relative to all other groups (males faster than females). We suggest that M. eachamensis males from streams responded to factors other than water velocity. Although replication of muscle and Ucrit phenotypes across same habitat populations within and/or among species was suggestive of adaptation, the common garden experiment did not confirm a genetic basis to these associations. Kinematic studies should consider the effect of the position and base length of dorsal fins.     

One step purification of corilagin and ellagic acid from Phyllanthus urinaria using high-speed countercurrent chromatography

High-speed countercurrent chromatography (HSCCC) has been successfully applied to the preparative separation of corilagin and ellagic acid in one step from the Chinese medicinal plant Phyllanthus urinaria L. by use of direct and successive injections of a crude methanolic extract. Some aspects concerning the practical use of this technique in the described application are considered.     

Influence of alterations in culture condition and changes in perfusion parameters on the retention performance of a 20 μm spinfilter during a perfusion cultivation of a recombinant CHO cell line in pilot scale

Since 1969 much attention has been devoted to the useof spinfilter systems for retention of mammalian cellsin continuous perfusion cultivations. Previousinvestigations dealt with hydrodynamic conditions,fouling processes and upscaling. But hydrodynamicconditions and fouling processes seem to have asecondary importance in spinfilter performance duringauthentic perfusion cultivations. Obviously,alterations in culture condition are more relevantespecially during long-term processes. Therefore, ourpratical approach focussed on the performance qualityof a commercially available 20 m spinfilterduring a perfusion cultivation of a recombinant CHOcell line in pilot scale regarding the followingissues: 1) retention of viable cells in thebioreactor; 2) removal of dead cells and cell debrisfrom the bioreactor; 3) alterations in culturecondition; and 4) changes in perfusion mode.Furthermore, we tested the performance of 20 mspinfilters in 2 and 100 l pilot scale using solidmodel particles instead of cells. Our investigationsshowed that retention of viable cells in pilot scalewas independent of spinfilter rotation velocity andperfusion rate; the retention increased from 75 to 95%corresponding to operation time, enlarging celldiameter and enhanced formation of aggregates in theculture during the perfusion cultivation. By means ofthe Cell Counter and Analyzer System (CASY) anoperation cut off of 13 m was determined forthis spinfilter. Using solid model particles in 2 lscale, optimal retention was achieved at a tip speedof 0.43 m s^-1 (141 rpm) – furtherenhancement of spinfilter rotation velocity up to0.56 m s^-1 (185 rpm) decreased the retentionrapidly. In pilot scale best retention performance wasobtained with tip speeds of 0.37 m s^-1(35 rpm) and 1.26 m s^-1 (120 rpm). Hence,significant retention in pilot scale could already beachieved with low agitation. Therefore, the additionof shear force protectives could be avoided so thatthe purification of the target protein from thesupernatant would be facilitated.     

Pollen content study of the lower atmosphere in León (Spain) by use of a tethered balloon

This study was undertaken in order to understand thebehaviour of airborne pollen grains, namely therelationship between their concentrations andconcomitant meteorological parameters, at differentaltitudes (ground level, 200, 400 and 600 m) of thelower atmosphere and its daily variations over onesite (the experimental farm of the University ofLeón). The experimental design involved a tetheredballoon (2.25 m³), an ADAS remote meteorologicalstation and an original radio controlled three headedpollen and spore sampler (called GABIS) using theRotorod design. Each head sampled a differentaltitude, while two control samples were taken atground level. Twenty-one takeoffs could be realized inthe 5 weeks period between end of May and end of June1997. Sampling was done early in the morning and sampling time at each altitudewas of 15 minutes. Results show that 45 differenttypes of pollen grains could be collected at this timeof the year and that significant variations could beobserved in the behaviour of the pollen cloud on a dayto day basis, probably because of differentmeteorological situations. Contrary to what isgenerally believed, pollen was in most cases moreabundant at higher altitude – on average by 30% ascompared to ground level – making evident anaerobiological layer of transport at about 500 m aboveground. This was especially the case for trees (Quercus and Castanea). The atmosphere MixingRatio was the most explicative factor at 200 m, whiletemperature dominated significance analysis at both400 and 600 m.