Effects of Chicken-excrement Amendments on Meloidogyne arenaria

The effects of chicken litter on Meloidogyne arenaria in tomato plants cv. Rutgers were determined in the greenhouse. Tomato seedlings were transplanted into a sandy soil amended with five rates of chicken litter and inoculated with 2,000 M. arenaria eggs. After 10 days, total numbers of nematodes in the roots decreased with increasing rates of chicken litter. After 46 days, egg numbers also decreased with increasing litter rates. In another experiment, soil was amended with two litter types, N-P-K fertilizer, and the two primary constituents of chicken litter (manure and pine-shaving bedding). After 10 days, numbers of nematodes in roots were smaller in chicken-excrement treatments as compared to nonexcrement treatments. At 46 days, there were fewer nematode eggs in chicken-excrement treatments compared to nonexcrement treatments. Egg numbers also were smaller for fertilizer and pine-shaving amendments as compared to nonamended controls. Chicken litter and manure amendments suppressed plant growth by 10 days after inoculation but enhanced root weights at 46 days after inoculation. Amendment of soil with chicken litter suppressed M. arenaria and may provide practical control of root-knot nematodes as part of an integrated management system.     

Fine structure of aphid stylet routes in plant tissues in correlation with EPG signals

Abstract. Plant penetration by Aphis fabae (Scopoli) was recorded by the electrical penetration graph (EPG) technique and followed by stylectomy during wave-forms that were suspected of indicating sieve element punctures. The severed stylets in the plant tissue were subsequently processed for transmission electron microscopy (TEM) and sectioned either transverse or longitudinal to the stylets. Two completely serially sectioned probes from the epidermis to the phloem were reconstructed.
In one probe the stylet pathway went to a sieve element and showed many empty branches of salivary sheath material. Breaks in cell walls filled with sheath material demonstrated that the majority of cells bordering the track had been punctured, which supports earlier evidence from EPGs. All types of cells showed punctures and the highest number was found inside the vascular bundle. Very few cells died, which would appear to be important for virus transmission, and in others cellular reactions remained limited to some callose formation. The route of the stylets was intercellular and passed through the secondary wall material. The role of pectinase in intercellular penetration, and previous evidence for intracellular tracks are discussed. Most sieve elements had been punctured but only one was eventually accepted. Thus, reaching a sieve element in a host plant does not automatically imply its acceptance though the reason remains unclear. Gelation of phloem proteins was shown in the stylet canal.
In a second probe, plant cytological and morphological correlations with the EPG were emphasized. Probes by other aphid-plant combinations showed great similarity.     

Interspecific crosses in the genus Tulipa L.: identification of pre-fertilization barriers

 Pollen tube growth in the pistil and pollen tube penetration of ovules have both been studied in crosses between cultivars from Tulipa gesneriana L. and 12 tulip species from all eight sections of the genus Tulipa to identify pre-fertilization barriers. Depending on the cross, pollen tubes grew as far as the stigma or the style or continued growing down into the ovary. Pollen tubes penetrated none or only a few percent of the ovules of some crosses, despite the presence of many pollen tubes in the ovary. In other crosses, from which no or only a few hybrids have been obtained after seed maturation on the plant, pollen tube penetration was found in up to 79% of the ovules. Apparently, various kinds of barriers preventing fertilization or normal embryogenesis occur in interspecific tulip crosses. Received: 26 July 1996 / Revision accepted: 31 January 1997     

Entry of immotile spermatozoa into zona-free hamster ova

We studied six men whose spermatozoa were immotile and possessed a variety of sperm tail structural abnormalities by electron microscopy. The semen of all six subjects had a normal percentage of oval forms and sperm undergoing capacitation and acrosome reaction. Despite the absence of motility, when incubated sperm from these subjects was added to a microdrop of medium containing zona pellucida-free hamster ova, sperm penetration or entry into the cytoplasm of from 1–9% of the eggs was evident with phase contrast microscopy. This latter finding suggests that, at least in this system, oocytes actively facilitate sperm incorporation. Penetration was absent when sperm of fertile men were rendered immotile, though still viable, by heat treatment.     

检测病毒气溶胶存活的方法学研究

以钝齿棒状杆菌噬菌体B271血清型为病毒等小颗粒生物粒子的模拟剂,建立了一种适合这类小颗粒生物粒子气溶胶存活研究的方法。本文从该噬菌体耐气溶胶化特性、气溶胶粒谱、用气溶胶示踪剂求算物理衰亡的方法和气溶胶采样回收技术等方面探讨了病毒气溶胶存活研究中的几个关键技术问题,为病毒气溶胶存活研究提供了参考。     

Mechanism of Ds1 excision from the genome of maize streak virus

Summary We have previously shown that the maize transposable element Ds1 introduced into maize plants by agroinfection can be excised from the genome of geminivirus maize streak virus (MSV). Excision depended strictly on the presence of an active Ac element in the plants. In this study, the excision products or footprints left in the MSV genome after Ds1 excision were extensively characterized and the effects of flanking sequences on Ds1 excision were analysed. Most types of footprints obtained were comparable to those described for Ds1 excision in the maize genome, and could be explained by the models proposed for excision of plant transposable elements. In two revertants, however, some terminal sequences of the Ds1 element were found to have been left behind at the excision site. The finding of this novel type of Ds1 footprint indicated that gene conversion events occurred during and/or after Ds1 excision from the MSV genome. A partial deletion of one copy of the 8 by duplications flanking the Ds1 element had no effect on the frequency or on the types of footprints of Ds1 excision from the MSV genome. Thus, the duplicated 8 by sequences flanking the transposable element are not involved in Ds1 excision. These results, as well as a statistical analysis of the modifications of the bases flanking the Ds1 element after excision, are discussed in terms of excision models.     

Influence of root diameter on the penetration of seminal roots into a compacted subsoil

A field experiment was conducted to evaluate the influence of root diameter on the ability of roots of eight plant species to penetrate a compacted subsoil below a tilled layer. The soil was a fine sandy loam red-brown earth with a soil strength of about 3.0 MPa (at water content of 0.13 kg kg^-1, corresponding to 0.81 plastic limit) at the base of a tilled layer. Relative root diameter (RRD), which was calculated as the ratio of the mean diameters of roots of plants grown in compacted soil to the mean diameters of those from uncompacted soil, was used to compare the sensitivity of roots to thicken under mechanical stress.Diameters of root tips of plants grown in soil with a compacted layer were consistently larger than those from uncompacted soil. Tap-rooted species generally had bigger diameters and RRDs than fibrous-rooted species. A higher proportion of thicker roots penetrated the strong layer at the interface than thinner roots. There were differences between plant species in the extent to which root diameter increased in response to the compaction. The roots which had larger RRD also tended to have higher penetration percentage.The results suggest that the size of a root has a significant influence on its ability to penetrate strong soil layers. It is suggested that this could be related to the effects which root diameter may have on root growth pressure and on the mode of soil deformation during penetration.     

Cone penetrometer testing,hydropunch®, and borehole geophysics applications for environmental investigations

An effective groundwater monitoring system can be implemented by the combined utilization of cone penetrometer (CPT), HydroPunch^® sampling, and borehole geophysical methods. The combined techniques provide a cost‐effective method for the design of a groundwater monitoring system for geologists or hydrogeologists assessing a site. With the relatively high costs associated with determining groundwater quality for site assessments, coupled with regulatory agency compliance, these combined methods can provide an effective edge in an increasingly competitive environmental industry. CPT combined with HydroPunch sampling can delineate the horizontal and vertical extent and concentration of a contaminant plume, define the extent and thickness of a free product plume, define soil and aquifer characteristics, and aid in the proper selection of well location and screen placement. The use of borehole geophysics further enhances the interpretation provided from the CPT. The interpretation of borehole geophysics provides additional information about the deposition regime of the area of investigation and a more detailed investigation of the stratigraphy. The CPT and HydroPunch can be used in unconsolidated sediments, and HydroPunch sampling can be combined with a hollow‐stem auger system. Borehole geophysics can be run in almost any environment. CPT and borehole geophysics provide information on specific lithologic characteristics necessary to obtain a groundwater sample from vertically separated aquifers. The HydroPunch can obtain a discrete, chemically representative groundwater sample from the targeted aquifer. CPT and borehole geophysics can also be used to determine lithology and for correlation of equivalent stratas from one borehole or well to the next. Borehole geophysical interpretation also provides a means of determining not only the stratigraphy and lithology but also the aquifer parameters and the type of fluids in the aquifer. Hydrogeologic and geologic data obtained from using these three methods can be employed to maximize the cost‐effectiveness and design efficiency of a groundwater monitoring system. Proper location of wells and screened interval placements are determined by a coherent design process rather than by random chance. Two studies demonstrating the combined applications of CPT, HydroPunch, and borehole geophysics for the design and placement of groundwater monitoring wells are presented in the following discussion.     

Interrelationship of Meloidogyne hapla and Ditylenchus dipsaci on Resistant and Susceptible Alfalfa

Simultaneous inoculations of alfalfa with Meloidogyne hapla larvae and Ditylenchus dipsaci at 16, 20, 24, and 28 C did not depress penetration of either nematode in ''Nev Syn XX'' -a selection resistant to M. hapla and D. dipsaci, ''Vernal 298'' -a selection resistant to M. hapla and susceptible to D. dipsaci, ''Lahontan'' -a cultivar resistant to D. dipsaci and susceptible to M. hapla, and ''Ranger'' -a cultivar susceptible to both M. hapla and D, dipsaci. Infection with D. dipsaci depressed growth of susceptible ''Vernal 298'' and ''Ranger'' at all soil temperatures, except for ''Vernal 298'' at 16 C. Infection with M. hapla alone did not depress growth of any of the alfalfas. A combination of M. hapla and D. dipsaci resulted in a synergistic weight depression on ''Ranger'' at all soil temperatures. Inoculation of the four alfalfas with D. dipsaci 2, 4, 6, and 8 wk before inoculation with M. hapla at 16, 20, 24, and 28 C did not influence the resistance or susceptibility of ''Nev Syn XX,'' ''Lahontan,'' or ''Ranger.'' However, galling of ''Vernal 298'' by M. hapla was affected by soil temperature, plant age, and inoculation with D. dipsaci.     

Time and process of sperm penetration into cumulus-free mouse eggs fertilized in vitro

Sperm penetration through the zona pellucida and fusion of the sperm head with the vitellus were observed continuously and filmed under phase optics in cumulus-free living mouse eggs inseminated in vitro with capacitated epididymal sperm. Most spermatozoa penetrated the zona pellucida, traversed the perivitelline space, and fused with the vitellus at an angle nearly perpendicular to the surface. The mean duration required for sperm to penetrate the zona pellucida was 20 minutes with a range of 15–26 minutes. Sperm traversed the perivitelline space in less than one second. The initial contact of sperm with the vitellus generally took place at the tip of the sperm head. When the tip of the sperm head contacted the vitellus there was an immediate reduction in the rate of flagellation, followed by the gradual sinking of the sperm head into the vitellus.