Cumulative Title Index

Abstract

Metal fractionation is a powerful tool for studying the mobility, bioavailability and toxicity of metals in sediments and soils. A seven-step sequential extraction technique was used to determine the potential mobility of selected heavy metals (Fe, Mn, Zn, Cu, Pb, Cd and Ni) in the sediments of Lake Naivasha. Results indicate that residual fraction was the most important phase for the elements Fe, Mn, Cu and Zn. However, Pb and Cd are highly enriched in the non-residual phases. Nickel on the other hand was distributed evenly between the non-residual and the residual fractions.

The total concentrations of the heavy metals suggested a decreasing order of iron ?> manganese ? zinc > nickel > copper ? lead > cadmium. However, the detailed sequential extraction data indicated an order of release or mobility of cadmium > lead ? nickel ? zinc > manganese > copper > iron. The high percentage of Cd and Pb in the mobile fractions suggests high bioavailability of these two elements in the study area and maybe a pointer to anthropogenic input of the two elements in the study area.     

Partitioning of Zn,Cd, Pb,and Cu in organic-rich soil profiles in the vicinity of a zinc smelter

Abstract

A five-step sequential extraction procedure was applied to organic-rich soil samples from five soil profiles situated 1–8 km from a zinc smelter. The partitioning of Zn, Cd, Pb, and Cu into five operationally defined fractions (exchangeable, “carbonate’’-bound, reducible, oxidizable, and residual) was studied at different soil depths down to 35cm. In the surface soil (0–1 cm) a major part of Pb and Cu was extracted in the oxidizable fraction, whereas for Zn and Cd slightly more was extracted in the ‘‘carbonate”-fraction than in the other four fractions. Extracted metal proportions in the oxidizable fraction were respectively of the order of 30%, 20%, 50%, and 80% for Zn, Cd, Pb, and Cu in the surface soil for all sites, but these proportions decreased with soil depth. In the surface soil less than 20% of all the elements were extracted in the residual fraction, but the proportions associated with this fraction generally increased with soil depth. In the C-horizon, differences in extracted proportions of Pb and Cu in the residual fraction were probably due to geochemical factors, whereas for Zn the low extracted proportion at a highly contaminated site (20%) may be due to Zn migration to the C-horizon at this site. For Cd the extracted proportions in the C-horizon were lower than for the other elements, generally below 20%, presumably because Cd is weaker in terms of its adsorption to the soil than the other elements studied. Total concentrations of the metals decreased strongly with increasing distance from the smelter, but less systematic differences were observed for their distributions among fractions. Potentially bioavailable metal proportions (exchangeable + “carbonate”-bound fraction) in the surface soil were about 50%, 60%, 20%, and 10% for Zn, Cd, Pb, and Cu, respectively. In C-horizon soil the mobility sequence Cd>Zn>Pb = Cu was generally observed. The present results indicate that the concentrations and chemical fractionation of Zn, Pb, and Cd in these soils represent a considerable risk to natural terrestrial food chains.     

Chemical partitioning of iron,cadmium, nickel and chromium in contaminated soils of south-eastern Nigeria

Abstract

Selected heavy metals Fe, Cd, Ni and Cr were studied in contaminated soil samples collected from south-eastern Nigeria. Geochemical differentiation into different chemical fractions, using Ma and Rao six-step sequential chemical extraction procedure, was carried out to assess the potential mobility and bioavailability of the heavy metals in the soil profiles. The residual fraction was the most important phase for the four heavy metals with the following average percentage values 74.43 for Fe, 37.69 for Cd, 70.11 for Ni and 62.47 for Cr. The carbonate fraction contained an appreciable proportion of Fe, Cd and Ni with the average percentage values of 16.29, 14.86 and 10.47 respectively, while organic fraction was of next importance for Cr with an average percentage value of 27.14. The Fe-Mn oxide fraction also contained 15.86% of Cd. Relatively low amounts of the metals were associated with water soluble and exchangeable fractions. The mobility factors for the metals in all the sites ranged from 8.55 to 40.04 for Fe, 8.66 to 56.58 for Cd, 12.74 to 30.19 for Ni and 0.82 to 7.22 for Cr. The generally low values of mobility factors coupled with significantly high levels of association of the metals with the residual fraction, indicate that the metals do not pose any environmental risk nor hazard.     

Fractionation of metals in the Sa1/2 sediment core from Lake Sarbsko (northern Poland) and its palaeolimnological implications

Abstract

This article documents and interprets stratigraphical changes in fractionation of Fe, Mn, Mg, K, Pb, Cu and Zn in the Sa1/2 sediment core from a coastal freshwater lake, Lake Sarbsko (northern Poland). The elements were sequentially extracted from the samples to distinguish five geochemical fractions: exchangeable, acid-extractable, reducible, oxidisable and residual. The analyses revealed substantial variations in geochemical partitioning of the elements and showed no correlation between the fractionation patterns and lithology of the sediments. In the sediments of Lake Sarbsko, iron is mainly bound to sulfides. Potassium occurs in its residual form. Magnesium and zinc are associated with carbonates and aluminosilicates, while copper occurs in compounds with organic matter and sulfides. Lead is found in connection with aluminosilicates and, to a lesser extent, with sulfides and organic matter. Manganese is partitioned between the oxidisable, acid-extractable, and exchangeable fractions. Heavy metals and potassium display the overall tendency to reduce the contents of their residual forms towards the top of the depositional sequence. Fe, Mn, Mg and Zn were found to be the most susceptible to post-sedimentary mobilisation.     

A Method for the Enhancement of Environmental Stress Resistance of Endoparasitic Fungus Esteya vermicola

Esteya vermicola is the first recorded endoparasitic fungus of the pinewood nematode, Bursaphelenchus xylophilus, which is the causal agent for the pine wilt disease. Culture on modified agar media with herbal extraction (0.5%) was found to be able to induce resistance to UV radiation, heat and drought conditions in Esteya vermicola. Herba Houttuyniae, Tatraxacum officinale and Scutellaria baicalensis Georgi exhibited the highest improvement on environmental competence of Esteya vermicola at all the tested time points under the stress conditions. In addition, improved quality and effective viability of Esteya vermicola were observed amended with the three herbal extractions in culture media. Enhanced stress resistance was associated with herbal metabolites. These findings provided a green, feasible, economical method for developing an open‐field spay application of fungal biocontrol agents against pine wilt disease.     

Solid-phase distribution of heavy metals as affected by single reagent extraction in dredged sediment derived surface soils

ABSTRACT

EDTA is useful to assess mobile metal pools in polluted soils and sediments. There is a need to enhance our understanding of the significance of metal fractions released. The impact of single reagent extraction with 0.05 mol L^?1 EDTA on the solid phase distribution of trace metals in surface soils sampled from confined dredged sediment disposal sites was investigated. Not extracted and EDTA extracted soils were subjected to sequential extraction to fractionate the total contents into: (1) easily exchangeable and carbonate bound fraction; (2) reducible fraction; (3) oxidisable fraction; and (4) residual fraction. With EDTA, significant portions of metals associated with the acid extractable and reducible fractions were released. The oxidisable and residual fractions remained unaffected for most of the investigated metals except for the organic matter associated metals (Cu and Pb). A decrease in the residual fraction after EDTA-extraction for Cu and Pb was attributed to artifacts of the sequential extraction procedure.     

Simple Determination of Trace Amounts of Anionic Surfactants in River Water by Spectrophotometry Combined with Solid-phase Extraction

A simple and sensitive specrophotometric method combined with solid-phase extraction (SPE) for the simultaneous determination of sodium linear-dodecylbenzenesulfonate (DBS) and sodium dodecyl sulfate (SDS) is described. The C2 (ethyl group bonded silicagel) cartridge could be repeatedly used more than 500 times for SPE, and it enabled the anionic surfactants to be concentrated by 50-fold. The calibration graph for DBS was linear in the range from 1.6×10^?8 M to 5.0×10^?7 M and for SDS from 2.0×10^?9 M to 3.0×10^?7 M. The relative standard deviation (n=5) for 5.0×10^?7 M DBS was 3.1% and for 2.5×10^?7 M SDS was 1.7%. The proposed method was applied to the simultaneous determination of DBS and SDS in river-water samples.     

Extraction of crude polysaccharides from Duchesnea indica (Andrews) Focke: optimization by response surface methodology

A full set of optimization procedure was applied to the extraction of anti-viral polysaccharides from Duchesnea indica (Andrews) Focke. By Plackett–Burman factorial design, three parameters (extraction time, extraction temperature, and ratio of water to raw material) were identified as significant to the extraction yield. However, no significant parameters had been identified for antiviral activity. A three-level-three-factor Box–Behnken factorial design was then employed to further optimize the extraction condition. The experimental data were fitted to a second-order polynomial equation using multiple regression analysis and also examined using appropriate statistical methods. This led to the construction of a response surface indicating the optimal values for each parameter and response studied. Concerning the extraction yield, an extraction at 98.51?ºC for 6.16 h with a ratio of water to raw material of 30.94 mL/g was found to be optimal. Under the optimized conditions, the experimental yield was 6.430 ± 0.078%, which was well matched with the predicted yield of 6.509%.