Energy,Nitrogen, and Farm Surplus Transitions in Agriculture from Historical Data Modeling. France, 1882–2013.

This article addresses agricultural metabolism and transitions for energy, nitrogen, farm production, self‐sufficiency, and surplus from historical data since the nineteenth century. It builds on an empirical data set on agricultural production and production means in France covering 130 consecutive years (1882–2013). Agricultural transitions have increased the net production and surplus of farms by a factor of 4 and have zeroed self‐sufficiency. The energy consumption remained quasi‐stable since 1882, but the energy and nitrogen structure of agriculture fully changed. With an EROI (energy return to energy invested) of 2 until 1950, preindustrial agriculture consumed as much energy to function as it provided in exportable surplus to sustain the nonagricultural population. The EROI doubled to 4 over the last 60 years, driven, on the one hand, by efficiency improvements in traction through the replacement of draft animals by motors and, on the other hand, by the joint increase in crop yields and efficiency in nitrogen use. Agricultural energy and nitrogen transitions shifted France from a self‐sufficiency agri‐food‐energy regime to a fossil‐dependent food export regime. Knowledge of resource conversion mechanisms over the long duration highlights the effects of changing agricultural metabolism on the system's feeding capacity. Farm self‐sufficiency is an asset against fossil fuel constraints, price volatility, and greenhouse gas emissions, but it equates to lower farm surplus in support of urbanization.     

面向工业生物技术的系统生物学

工业生物技术是以微生物细胞工厂利用可再生的生物原料来生产能源、材料与化学品等的生物技术,在解决资源、能源与环境等问题方面起着越来越重要的作用。系统生物学是全面解析微生物细胞工厂及其发酵过程从"黑箱"到"白箱"的重要研究方法。系统生物学借助基因组、转录组、蛋白质组、代谢组以及代谢流组等多组学数据,可解析微生物细胞工厂在RNA、蛋白与代谢物等不同水平上的变化规律与调控机制。目前,系统生物学在微生物细胞工厂的设计创建与发酵工艺优化中起着越来越重要的指导作用,许多成功应用实例不断涌现,推动着工业生物技术的快速发展。文中重点综述基因组、转录组、蛋白质组、代谢组与代谢流组以及基因组规模的网络模型等各组学技术的最新发展及其在工业生物技术尤其是菌株改造与发酵优化中的应用,并就工业生物技术中系统生物学的未来发展方向进行展望。     

工业环境下酶蛋白的催化行为与适应性改造研究进展

酶在工业上有着广泛应用和巨大潜力,但工业生产中高温、强酸/碱、高盐、有机溶剂和高底物浓度等条件仍然制约着酶的大规模应用。为使酶能更好地在工业环境下发挥催化作用,目前的主要策略是对酶进行适应性改造(如理性或半理性设计、定向进化、固定化等)。文中简要阐述了酶在工业环境下的催化行为以及近年对其适应性改造的研究进展,以期为酶的适应性改造提供参考。     

Anaerobic C–H Oxyfunctionalization: Coupling of Nitrate Reduction and Quinoline Hydroxylation in Recombinant Pseudomonas putida

Whole‐cell biocatalysis for C–H oxyfunctionalization depends on and is often limited by O₂ mass transfer. In contrast to oxygenases, molybdenum hydroxylases use water instead of O₂ as an oxygen donor and thus have the potential to relieve O₂ mass transfer limitations. Molybdenum hydroxylases may even allow anaerobic oxyfunctionalization when coupled to anaerobic respiration. To evaluate this option, the coupling of quinoline hydroxylation to denitrification is tested under anaerobic conditions employing Pseudomonas putida (P. putida) 86, capable of aerobic growth on quinoline. P. putida 86 reduces both nitrate and nitrite, but at low rates, which does not enable significant growth and quinoline hydroxylation. Introduction of the nitrate reductase from Pseudomonas aeruginosa enables considerable specific quinoline hydroxylation activity (6.9 U g_CDW^?1) under anaerobic conditions with nitrate as an electron acceptor and 2‐hydroxyquinoline as the sole product (further metabolization depends on O₂). Hydroxylation‐derived electrons are efficiently directed to nitrate, accounting for 38% of the respiratory activity. This study shows that molybdenum hydroxylase‐based whole‐cell biocatalysts enable completely anaerobic carbon oxyfunctionalization when coupled to alternative respiration schemes such as nitrate respiration.     

Enhanced high copy number plasmid maintenance and heterologous protein production in an Escherichia coli biofilm

Escherichia coli has been widely used for heterologous protein production (HPP). To determine whether a biofilm environment could benefit E. coli HPP using high copy number plasmids, we compared plasmid maintenance and HPP by E. coli ATCC 33456 containing plasmid pEGFP (a pUC family vector) cultivated in biofilms and in suspended culture. Cells were grown with or without antibiotic selective pressure in flow cells or chemostats for up to 6 days. In biofilms, antibiotic selective pressure increased the plasmid copy number (PCN), but by 144 h, biofilms grown in antibiotic-free media had comparable plasmid concentrations. In the chemostat, the PCN declined steadily, although 100 ppm ampicillin in the medium slowed the rate of plasmid loss. Production of green fluorescent protein (GFP), a representative heterologous protein, was quantified by flow cytometry. In biofilms, at ampicillin concentrations >or=33 ppm, strongly fluorescent cells comprised more than half of the population by 48 h. In the chemostat, more than 50% of the population was non-fluorescent by 48 h in media containing 100 ppm ampicillin, and strongly fluorescent cells were <10% of the population. Biofilm structure was determined by confocal microscopy. Maximum biofilm thickness ranged from 30 to 45 microns, with no significant changes in biofilm structure after 48 h. Plasmid multimer percentages were similar to inocula for cells cultivated in either biofilms or the chemostat. The results indicate that the biofilm environment enhanced both plasmid maintenance and cellular GFP concentrations, and that low levels of antibiotic increased the beneficial effect.     

我国工业生物技术和产业的现状、差距与任务

工业生物技术是利用生化反应和生物体机能进行物质合成加工与能量转化利用的集成技术,正在支撑建立以可发酵糖、秸秆、二氧化碳等可再生资源为原料的化学品绿色高效制造新路线,有望实现工业制造方式的根本转变,是支撑经济社会可持续发展的重大战略技术,已成为世界各国科技和产业竞争的焦点。本文从工业生物技术深度融入和支撑生物经济发展的态势出发,系统分析了我国工业生物技术和生物产业发展的现状、短板问题,提出了未来建议重点发展的主要方向。     

国家人勇担国家责，积极推动中国生物经济与生物产业发展

作为国家级研究机构,中国科学院各级研究所一直以来的重要使命就是心系国家事、肩扛国家责、永做国家人,站在国际科学发展前沿的高度,紧抓国家社会发展中重大需求的科学与技术问题,布局研究所及其项目和吸引人才。本文以个人视角,回顾了2004年回国接任微生物研究所所长后,开始思考工业生物技术的发展,布局天津研发中心,经过多年努力,在院党组的领导与支持下,中国科学院天津工业生物技术研究所建成,已经取得了重要成果;还回顾了建所初衷和早期成长发展历程以及与微生物研究所的关系。通过思考科学、技术、工程(医学)之间的关系,提出从事基础科学研究的科研人员进行转化应用的路径,即“想法-假说-实验-概念-论文-技术-样品-产品-商品”的9层逻辑关系,希望科学家能够做出解决实际问题的实用工作,并展望了未来工业生物技术的远景。     

Filamentous Alphaproteobacteria associated with bulking in industrial wastewater treatment plants

The phylogeny and distribution of filamentous Alphaproteobacteria, morphologically similar to “Nostocoida limicola” and Eikelboom Type 021N that cause the solids separation problem of bulking in industrial activated sludge plants is described here. A combination of culture-dependent and culture-independent molecular methods has characterized 5 novel species. 16S rRNA targeted oligonucleotide probes were designed for their in situ identification by fluorescence in situ hybridisation (FISH) and used to monitor their presence in 86 WWTPs treating different industrial effluents in four European countries. The involvement of these bacteria in bulking in these plants was confirmed. Filaments hybridising with the ALF-968 probe for the Alphaproteobacteria were present in 65% of the WWTPs examined. They were dominant and therefore probably responsible for bulking in 25.5% of them. The heterogeneous filamentous alphaproteobacterial populations in these communities could be completely identified after application of the oligonucleotide probes used in this study in 91% of the plants containing them. The only filamentous Alphaproteobacteria retrieved in pure culture was isolated from three different industrial WWTPs plants. None of these isolates could grow anaerobically on glucose or denitrify, but all grew aerobically and heterotrophically on a range of carbon sources. Although morphologically similar to the Eikelboom Type 021N morphotype, they were not involved in sulphur metabolism. These bacteria accumulated lipidic storage granules that were associated with their presence under the unbalanced growth conditions existing in these plants.     

Comparative LCA of industrial objects

Goal, Scope and Background  This paper is the second part of the publication which is devoted to comparative LCA analysis of the industrial pumps. The previous paper deals with the methodological aspects concerning quality assessment and forms an independent work. This paper uses practically only the methodological suggestions made there. The main aim of the presented study is to make a comparison between the industrial pumps which are based on two different technologies. The Life Cycle Assessment method is used to check whether the differences of the manufacturing processes influence the level of the potential environmental impact during the whole life cycle of the analysed products. Methods  The Life Cycle Assessment is carried out using the Ecoindicator99 method. Additionally, an extensive quality analysis of the LCA study is made (Part I). To make the process of an identification of the data easier and faster, they are assigned to a special data documentation form. To ensure the credibility of the LCA results different methods of interpretation are used. Results and Discussion  The LCA analysis shows clear superiority of the pumps manufactured using modern technology. It seems that this superiority results not only from the differences in the emissions, but also from different characteristics of effectiveness in the usage stage. Thanks to the uncertainty analysis, each LCA result is provided with the range of uncertainty. Conclusions  The LCA results are supported by different techniques of interpretation: the sensitivity-, the contribution-, the comparative-, the discernability- and the uncertainty analysis. There is strong evidence of the superiority of the pumps based on the modern technology. Recommendations and Outlook  The main source of the environmental impact in the case of pumps is the usage stage and the consumption of energy. That is why it should be the main area to improve. The LCA results show that actions taken in the usage stage and energy consumption can lead to a considerable reduction of the environmental impacts.     

Reduction of bacterial indicators and bacteriophages infecting faecal bacteria in primary and secondary wastewater treatments

AIMS: To compare the suitability of various bacterial and viral indicators to assess the removal of faecal micro-organisms by primary and secondary wastewater treatment processes. METHODS AND RESULTS: The numbers of several bacterial indicators [faecal coliforms (FC), enterococci (ENT) and sulphite-reducing clostridia (SRC)] and bacteriophages (somatic coliphages, F-specific RNA phages and bacteriophages infecting Bacteroides fragilis strain RYC2056) were determined in incoming raw sewage and effluents from various primary and secondary wastewater treatment processes in several geographical areas. Reductions in the numbers of indicators were calculated as log10 reductions. Processes based on removal and mild disinfection, showed no significant differences in the elimination of any of the indicators tested or between geographical areas. In contrast, treatment processes that include strong microbial inactivation, such as lime-aided flocculation and lagooning, showed significant differences between the log10 reductions of the various micro-organisms studied, FC showing the highest reduction and spores of SRC and phages infecting B. fragilis the lowest. CONCLUSIONS: The microbial elimination performance of treatment processes based principally on removal and mild disinfection can be evaluated with a single indicator. In contrast, processes with additional disinfecting capabilities require more than one indicator for accurate evaluation of the treatment; bacteriophages are good candidates for use as second indicators. SIGNIFICANCE AND IMPACT OF THE STUDY: Bacteriophages provide additional information for the evaluation of microbial elimination in some treatment plants. The easy, fast and cheap methods available for phage determination are feasible both in industrialized and developing countries.