Technoecological analysis of energy carriers for long‐haul transportation

Long‐haul transportation demand is predicted to increase in the future, resulting in higher carbon dioxide emissions. Different drivetrain technologies, such as hybrid or battery electric vehicles, electrified roads, liquefied natural gas and hydrogen, might offer solutions to this problem. To assess their ecological and economic impact, these concepts were simulated including a weight and cost model to estimate the total cost of ownership. An evolutionary algorithm optimizes each vehicle to find a concept specific optimal solution. A model calculates the minimum investment in infrastructure required to meet the energy demand for each concept. A well‐to‐wheel analysis takes into account upstream and on‐road carbon dioxide emissions, to compare fully electric vehicles with conventional combustion engines. Investment in new infrastructure is the biggest drawback of electrified road concepts, although they offer low CO₂ emissions. The diesel hybrid is the best compromise between carbon reduction and costs.     

Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment

Life cycle assessment (LCA) and environmentally extended input–output analyses (EEIOA) are two techniques commonly used to assess environmental impacts of an activity/product. Their strengths and weaknesses are complementary, and they are thus regularly combined to obtain hybrid LCAs. A number of approaches in hybrid LCA exist, which leads to different results. One of the differences is the method used to ensure that mixed LCA and EEIOA data do not overlap, which is referred to as correction for double counting. This aspect of hybrid LCA is often ignored in reports of hybrid assessments and no comprehensive study has been carried out on it. This article strives to list, compare, and analyze the different existing methods for the correction of double counting. We first harmonize the definitions of the existing correction methods and express them in a common notation, before introducing a streamlined variant. We then compare their respective assumptions and limitations. We discuss the loss of specific information regarding the studied activity/product and the loss of coherent financial representation caused by some of the correction methods. This analysis clarifies which techniques are most applicable to different tasks, from hybridizing individual LCA processes to integrating complete databases. We finally conclude by giving recommendations for future hybrid analyses.     

Environmental sustainability of orthopedic devices produced with powder bed fusion

Additive manufacturing consists in melting metallic powders to produce objects from 3D data, layer upon layer. Its industrial applications range from automotive, biomedical (e.g., prosthetic implants for dentistry and orthopedics), aeronautics and others. This study uses life cycle assessment to evaluate the possible improvement in environmental performance of laser‐based powder bed fusion additive manufacturing systems on prosthetic device production. Environmental impacts due to manufacturing, use, and end of life of the designed solution were assessed. In addition, two powder production technologies, gas atomization (GA) and plasma atomization (PA), were compared in order to establish the most sustainable one. Production via traditional subtractive technologies and the additive manufacturing production were also compared. 3D building was found to have a significant environmental advantage compared to the traditional technology. The powder production process considerably influences on a damage point of view the additive manufacturing process; however, its impact can be mitigated if GA powders are employed.     

两种价态铬(Ⅲ,Ⅵ)对真核酵母细胞谷胱甘肽水平影响

工业的迅猛发展使得重金属污染加剧,得到了人们的广泛关注。铬(Cr)在化工业中的广泛应用,使其成为一种主要的环境污染重金属离子。酿酒酵母是研究金属毒性最常用的生物之一。本文比较了三种铬盐(三氯化铬、三氧化铬、重铬酸钾)对酿酒酵母生长的影响,半抑制浓度的两种价态铬(Cr^3+,Cr^6+)处理酵母细胞,Cr^6+引起细胞的致死率更高。已有研究表明谷胱甘肽是胞内重要的还原剂,常用于细胞的重金属解毒,因此探究了两种价态的铬对酵母胞内谷胱甘肽水平的影响。结果显示重铬酸钾和三氧化铬浓度的升高都会引起胞内含量显著降低,而三氯化铬基本不变,过表达GSH1基因有利于提高酵母细胞对Cr^6+的抗性,但对Cr^3+没有明显效果,这说明两种价态铬在胞内生化作用方式不同,细胞应对的解毒机制也不一样。该研究对工业含铬废弃物处理和微生物治理环境污染提供了理论依据。     

微生物技术治理水体重金属镉、铬污染的研究进展

近年来,随着我国工农业迅速发展,"三废"的大量排放,水体中重金属污染愈发严重,其中重金属镉、铬的污染显得尤为突出。研究者利用微生物技术开展了大量治理污水中镉、铬的研究。本文就不同种类微生物对镉、铬的修复及作用机理进行论述,以期为微生物用于实际污水中镉、铬的治理提供参考。     

Acid lactic lactobacilli as a biotechnological toll to improve food quality and human health

The genus Lactobacillus has been widely used in food industry as starter or adjunct culture due to its probiotic features. Its biotechnological features improve the spectrum of uses of lactobacilli, which can affect its applicability directly. In this sense, this literature review gathers information and discusses the biotechnological potential of technological/probiotic lactobacilli aiming to improve food quality and human health. The primary and secondary metabolism generates specific substances, such as organic acids, carbon dioxide, hydrogen peroxide, diacetyl, fatty acids, and bacteriocins, which are determinant due to their probiotic potential, antimicrobial activity, and the development of new food flavors. In order to become industrially and commercially attractive, it is necessary develop a large-scale process with lower production costs.     

三级串联垂直潜流人工湿地的脱氮性能及微生物学特征

探究了3种水力负荷(HLR)下三级串联垂直潜流人工湿地(T-VFCWs)对农村生活污水的处理效果,并解析了系统中的氮素转化机制。结果表明: 当系统HLR由0.10增至0.20 m³·m^-2·d^-1时,T-VFCWs始终保持着对农村生活污水高效的处理效果,系统出水水质满足《城镇污水处理厂污染物排放标准》(GB 18918—2002)一级A标准。T-VFCWs中顺次连接的3个VFCW单元(标记为V-1、V-2和V-3)在限氧环境下因其进水水质的差异可形成各自不同的氮素转化途径,并通过协同作用实现系统的高效脱氮。当T-VFCWs在试验期间连续运行时,V-1、V-2和V-3中主要的脱氮途径分别为短程硝化/反硝化作用、基于亚硝化的全程自养脱氮(CANON)作用和反硝化作用,上述3单元对进水中总氮(TN)和NH₄⁺-N去除的贡献率分别为(51.3±4.4)%和(63.7±2.6)%、(30.9±4.8)%和(35.5±4.5)%、(17.8±5.0)%和(0.8±0.1)%。该研究可为组合式人工湿地的研发及工程化应用提供科学依据和技术支撑。     

Decline of Eulia ministrana (Lepidoptera: Tortricidae) in polluted habitats is not accompanied by phenotypic stress responses

Environmental pollution is currently identified as one of the major drivers of rapid decline of insect populations, and this finding has revitalized interest in insect responses to pollution. We tested the hypothesis that the pollution-induced decline of insect populations can be predicted from phenotypic stress responses expressed as morphological differences between populations inhabiting polluted and unpolluted sites. We explored populations of the brassy tortrix Eulia ministrana in subarctic forests along an environmental disturbance gradient created by long-lasting severe impacts of aerial emissions of the copper–nickel smelter in Monchegorsk, northwestern Russia. We used pheromone traps to measure the population densities of this leafrolling moth and to collect specimens for assessment of three morphological stress indices: size, forewing melanization, and fluctuating asymmetry in wing venation. Wing length of E. ministrana increased by 10%, and neither forewing melanization nor fluctuating asymmetry changed from the unpolluted forest to the heavily polluted industrial barren. However, the population density of E. ministrana decreased 5 to 10 fold in the same pollution gradient. Thus, none of the studied potential morphological stress indicators signaled vulnerability of E. ministrana to environmental pollution and/or to pollution-induced environmental disturbance. We conclude that insect populations can decline without any visible signs of stress. The use of morphological proxies of insect fitness to predict the consequences of human impact on insect populations is therefore risky until causal relationships between these proxies and insect abundance are deciphered.     

Reunderstanding Cairo through urban metabolism: Formal versus informal districts resource flow performance in fast urbanizing cities

Urban expansion can be seen as the most pervasive human impact on the environment where its high resource use contributes negatively to climate change and resource scarcity crises. Many experts call for decoupling resource use, economic development, and related urban development especially within cities of the Global South. This paper focuses on investigating resource efficiency through the lens of urban metabolism. It investigates current resource flows, through material flow analysis, from source to sink, in two diverse districts in Cairo: a formal district and an informal one, regarding materials (waste) and mobility. Consequently, the paper discusses locally responsive interventions that address local priorities as opposing to citywide one‐size fits all solution. The paper relies on parcel audits, which are embedded in an Urban Metabolism Information System developed by the Ecocity Builders and their partners, through a joint project with Cairo University. The methodology couples crowd‐sourced data, parcel audits, and experts’ knowledge to better understand resource flows based on a bottom‐up approach, given the unavailability of governmental data on the local level. The paper further correlates the perceived quality of life with the actual resource flows. It utilizes fieldwork investigations to argue against the local misconceptions regarding the inefficiency of informal areas/systems versus the higher efficiency of planned areas/systems. The paper concludes by proposing integrated solutions that respond to local needs and resources. It highlights the challenges and lessons of this tailored bottom‐up approach and its applicability in other cities worldwide.     

Modeling the circular economy in environmentally extended input–output: A web application

Global environmental and resource problems ask for new ways of managing the production and consumption of resources. The implementation of new paradigms, such as the circular economy, requires decision‐makers at multiple levels to make complex decisions. For this, clear analyses and modeling of scenarios are of utmost importance. Meanwhile, as the sophistication of databases and models increases so does the need for user‐friendly tools to use them. The RaMa‐Scene web platform reduces these barriers by allowing users to visualize easily diverse impacts of implementing circular‐economy interventions. This online web platform makes use of the multi‐regional environmentally extended input–output database EXIOBASE version 3 in monetary units, which has been modified to show explicit transactions of raw materials from recycling activities.