Effect of increased CO2 concentration and temperature on the phyllosphere mycoflora of winter wheat flag leaves during ripening

The impact of elevated carbon dioxide (CO₂, 600/700 μmol mol^-1) and temperature (+ 4°C) on phyllosphere fungi colonising flag leaves of mini crops of winter wheat cv. Mercia between anthesis and harvest was determined in a computer-controlled environment facility in 1993 and 1994. In both years the total fungal populations (cm² leaf) were found to have increased due to exposure to either elevated CO₂ and elevated CO₂+ temperature treatments. This was mainly due to significant increases in populations of Cladosporium spp. (C. cladosporioides and C. herbarum) on the flag leaves during ripening. Other phyllosphere component species such as white and pink yeasts were not markedly affected by treatments. The range of fungal species found in such controlled environment chambers was narrower than that commonly found on flag leaves of field grown crops. Common and important colonisers of leaves and ripening ears such as Aureobasidium pullulans, Epicoccum nigrum and Fusarium spp. were seldom isolated.     

Growth kinetics of a bacteriophage in continuous culture

Lytic coliphage Qbeta was grown in continuously cultured host bacteria using a cascade of stirred flow reactors. The apparatus was constructed so that the steady stream of exponentially growing bacterial cells passing through the stirred flow reactors served to prevent coevolution brought about by host-parasite interactions. Wall growth was the primary cause for deviation from ideal continuous culture conditions and is largely dependent on the surface structure of the host bacteria. Using an Escherichia coli strain deficient in adhesive type I pili expression, the desynchronization of single burst events could easily be followed over the course of four infection latency periods. Computer simulations based on a two-stage model for the Qbeta infection cycle were in perfect agreement with the experimental data. Applications of the optimized system to strategies of molecular evolution are discussed. (c) 1996 John Wiley & Sons, Inc.     

Synthesis of 6-deoxy-5-thio-d-glucose

Three routes were investigated for the conversion of d-glucose into the title compound. In the first approach, reduction of the 5,6-thürane ring of 5,6-dideoxy-5,6-epithio-1,2-O-isopropylidene α-d-glucofuranose (17) as well as that of its 3-O-allyl derivative (13) with lithium aluminium hydride was investigated; 17 afforded the corresponding 6-deoxy derivative besides di-, tri-, and poly-mers, whereas only polymers were formed from 13. In the second approach, the oxirane ring of was reduced by sodium borohydride and the resulting 6-deoxy derivative was converted into the 5-thiobenzoate; the corresponding hex-4-enofuranose was formed as a byproduct. In the third approach partial mesylation of methyl 5-thio-α-d-glucopyranoside was attempted, but the 6-mesylate 27 could be isolated only in modest yield (28%) together with rearranged 2,5-thioanhydromannofuranoside derivatives. The mechanism of this rearrangement is discussed in detail. The 6-mesylate 27 was converted via the 6-iodo derivative into the title compound.     

Conformation of 4-thio-l-lyxono-1,4-lactone in solution and in the crystalline state

The conformation in ²H₂O of 4-thio-l-lyxono-1,4-lactone (1) was studied by nuclear magnetic resonance spectroscopy, by means of homonuclear (J_1H,1H) and heteronuclear (J_1H,13C) coupling constants. The couplings were directly measured by a two-dimensional heteronucleus-coupled ω₁ hetero-half-filtered proton-proton correlation (HETLOC) experiment, which does not require ¹³C isotopic enrichment. In solution, the thiolactone ring of 1 adopts preferentially the E₃ conformation, and its hydroxymethyl group populates mainly the gt rotamer. The X-ray diffraction data of a single crystal of 1 indicates that also in the solid state the thiolactone ring adopts an E₃ conformation, with a puckering somewhat larger than that observed for aldono-1,4-lactones and furanose rings. The molecules are linked by hydrogen bonds, which form chains. Particularly, O-5 is fully engaged as donor and acceptor in hydrogen bonding and the rotameric conformation of the hydroxymethyl group of 1 is fixed in the tg form.     

Role ofDrosophila TRP in inositide-mediated Ca2+ entry

Inositol lipid signaling relies on an InsP₃-induced Ca²⁺ release from intracellular stores and on extracellular Ca²⁺ entry, which takes place when the Ca²⁺ stores become depleted of Ca²⁺. This interplay between Ca²⁺ release and Ca²⁺ entry has been termed capacitative Ca²⁺ entry and the inward current calcium release activated current (CRAC) to indicate gating of Ca²⁺ entry by Ca²⁺-store depletion. The signaling pathway and the gating mechanism of capacitative Ca²⁺ entry, however, are largely unknown and the molecular participants in this process have not been identified. In this article we review genetic, molecular, and functional studies of wild-type and mutantDrosophila photoreceptors, suggesting that thetransient receptor potential mutant (trp) is the first putative capacitative Ca²⁺ entry mutant. Furthermore, several lines of evidence suggest that thetrp gene product TRP is a candidate subunit of the plasma membrane channel that is activated by Ca²⁺ store depletion.     

Biological activity and metabolic clearance of recombinant human follicle stimulating hormone produced in Sp2/0 myeloma cells

Human follicle stimulating hormone is a pituitary glycoprotein that is essential for the maintenance of ovarian follicle development and testicular spermatogenesis. Like other members of the glycoprotein hormone family, it contains a common a subunit and a hormone specific subunit. Each subunit contains two glycosylation sites. The specific structures of the oligosaccharides of human follicle stimulating hormone have been shown to influence both thein vitro andin vivo bioactivity. Since the carbohydrate structure of a protein reflects the glycosylation apparatus of the host cells in which the protein is expressed, we examined the isoform profiles,in vitro bioactivity and metabolic clearance of a preparation of purified recombinant human follicle stimulating hormone derived from a stable, transfected Sp2/0 myeloma cell line, and pituitary human follicle stimulating hormone. Isoelectric focussing and chromatofocussing studies of human follicle stimulating hormone preparations both showed a more basic isoform profile for the recombinant human follicle stimulating hormone compared to that of pituitary human follicle stimulating hormone. The recombinant human follicle stimulating hormone had a significantly higher radioreceptor activity compared to that of pituitary human follicle stimulating hormone, consistent with a greaterin vitro potency. Pharmacokinetic studies in rats indicated a similar terminal half life (124 min) to that of the pituitary human follicle stimulating hormone (119 min). Preliminary carbohydrate analysis showed recombinant human follicle stimulating hormone to contain high mannose and/or hybrid type, in addition to complex type carbohydrate chains, terminating with both2,3 and2,6 linked sialic acids. These results demonstrate that recombinant human follicle stimulating hormone made in the Sp2/0 myeloma cells is sialylated, has a more basic isoform profile, and has a greaterin vitro biological potency compared to those of the pituitary human follicle stimulating hormone.     

Homogenisation and oxygen transfer rates in large agitated and sparged animal cell bioreactors: Some implications for growth and production

Because of concern for cell damage, very low agitation energy inputs have been used in industrial animal cell bioreactors, typical values being two orders of magnitude less than those found in bacterial fermentations. Aeration rates are also very small. As a result, such bioreactors might be both poorly mixed and also unable to provide the higher oxygen up-take rates demanded by more intensive operation. This paper reports experimental studies both of K _L a and of mixing (via pH measurements) in bioreactors up to 8 m³ at Wellcome and of scaled down models of such reactors at Birmingham. Alongside these physical measurements, sensitivity of certain cell lines to continuously controlled dO₂ has been studied and the oxygen up-take rates measured in representative growth conditions. An analysis of characteristic times and mixing theory, together with other recent work showing that more vigorous agitation and aeration can be used especially in the presence of Pluronic F-68, indicates ways of improving their performance. pH gradients offer a special challenge.     

Alternating bolus and continuous infusion 5-fluorouracil: a strategy to overcome resistance to this fluoropyrimidine in advanced colorectal cancer patients

Focusing our effort on the importance of FUra scheduling we have tested the hypothesis that pulse and continuous infusion (CI) of the fluoropyrimidine have different mechanisms of cytotoxicity. Our initial approach was to compare the mechanism of resistance of a cell line resistant to a short term exposure to FUra (HCT-8/FU4hR) to that of a cell line resistant to a prolonged exposure to the fluoropyrimidine (HCT-8/FU7dR). Cytotoxicity studies showed that HCT-8/FU4hR cells were still sensitive to FUra given as a 7-d exposure, suggesting different mechanisms of resistance. Indeed, rapid recovery of TS activity after drug removal was evident in the HTC-8/FU7dR cell line while HCT-8/FU4hR cells were similar to the parental cell line with regard to both the degree of in situ TS inhibition by FUra and duration of inhibition after FUra removal. In contrast, labelling studies with [³H-6] FUra (4 h exposure, 100 M) showed that the incorporation of the fluoropyrimidine into RNA is significantly decreased in HCT-8/FU4hR cells as compared to parental HCT-8 cells.Given the lack of cross resistance between the two schedulesin vitro, a pilot trial was done on patients with colorectal cancer refractory to bolus FUra. On 15 patients failing after FUra+LV or FUra alone 1 PR, 3 MR, 3 SD and 8 P were observed, confirmng a certain degree of activity of CI FUra in patients clinically resistant to bolus FUra.Based on this rationale, a phase II trial of schedule-oriented biochemical modulation of FUra in advanced colorectal cancer patients was conducted, employing a hybrid regimen of 2 biweekly cycles of FUra bolus (600 mg/sqm), preceeded by (24 h interval) methotrexate, 200 mg/sqm (in order to maximize the RNA effect of the drug) alternating with FUra continuous infusion, 200 mg/sqm daily for 3 weeks, modulated by leucovorin, 20 mg/sqm weekly bolus (in order to maximize the DNA effect).Thirty-three consecutive patients (median ECOG PS 1) with advanced measurable colorectal cancer and no prior therapy for metastatic disease entered the study, from February 1992 to August 1993. Three complete and 13 partial responses were obtained among these 33 patients (RR=48%, 95% confidence limis, 31–66%). After a median follow-up time of 23 months, 16 patients are still alive. The median progression free survival and overall survival were 9.6 and 20.8 months, respectively. No toxic deaths or grade 4 toxicity occurred. The incidence of grade 3 toxicity per patient in any cycle was: mucositis 6%, diarrhea 3% and vomiting 3% for the bolus part and 21%, 3% and 6% respectively, for the continuous infusion part of the regimen. Hand-foot syndrome occurred in 27% of the patients treated with the continuous infusion regimen.In conclusion, this experimental and clinical project has generated a novel regimen of schedule oriented biochemical modulation that is twice as active and half as toxic compared to bolus FU+LV given with either the daily x 5 or the weekly schedule. This high clinical activity is very encouraging, especially considering that 1) consecutive patients were entered, 2) the responses were independently reviewed, 3) the progression free survival and survival were much longer than those actually reported for this disease, 4) the toxicity of the program, in particular the bolus regimen, was relatively low allowing further intensification.     

Engineering challenges in high density cell culture systems

High density cell culture systems offer the advantage of production of bio-pharmaceuticals in compact bioreactors with high volumetric production rates; however, these systems are difficult to design and operate. First of all, the cells have to be retained in the bioreactor by physical means during perfusion. The design of the cell retention is the key to performance of high density cell culture systems. Oxygenation and media design are also important for maximizing the cell number. In high density perfusion reactors, variable cell density, and hence the metabolic demand, require constant adjustment of perfusion rates. The use of cell specific perfusion rate (CSPR) control provides a constant environment to the cells resulting in consistent production. On-line measurement of cell density and metabolic activities can be used for the estimation of cell densities and the control of CSPR. Issues related to mass transfer and mixing become more important at high cell densities. Due to the difference in mass transfer coefficients for oxygen and CO₂, a significant accumulation of dissolved CO₂ is experienced with silicone tubing aeration. Also, mixing is observed to decrease at high densities. Base addition, if not properly done, could result in localized cell lysis and poor culture performance. Non-uniform mixing in reactors promotes the heterogeneity of the culture. Cell aggregation results in segregation of the cells within different mixing zones. This paper discusses these issues and makes recommendations for further development of high density cell culture bioreactors.