Modulation of fibroblast response to maitotoxin along the cell division cycle

Maitotoxin (MTX) induces an increase of [Ca²⁺]_i and of phosphoinositide breakdown in various cell types. The [Ca²⁺]_i increase followed with fluorescent probes on cell suspensions has been described as slow and lasting, in contrast to the signal induced by calcium ionophores such as ionomycin. MTX effects have been studied on two fibroblastic cell lines, BHK21 C13 and FR 3T3, synchronized by serum deprivation treatment performed in an isoleucine-free medium for BHK21 C13 cells. In BHK21 C13 cells, flow cytometry analysis showed that two stages, G1/S and G2/M, were particularly susceptible to MTX treatment. Scanning laser cytometry demonstrated that calcium response of FR 3T3 fibroblasts followed with Indo-1 varied during the cell division cycle. The [Ca²⁺]_i increase was almost always vertical, but its delay after MTX addition lasted from zero (S and G2/M transition) to 10–20 min (G1) or more (G2). No [Ca²⁺]_i change could be detected during mitosis. The [Ca²⁺]_i response at the S phase was biphasic. These observations suggest that (1) the lasting response described in the literature represents a global cell population effect, and (2) cells are more sensitive to MTX at specific stages of the cell division cycle, which could correspond to periods when calcium signals have been detected in different cell types.Abbreviations MTX maitotoxin - [Ca²⁺]_i intracellular calcium concentration - IP₃ inositol triphosphate     

Design of a bubble-swawm bioreactor for animal cell culture

A stationary bubble-swarm has been used to aerate a mammalian cell culture bioreactor with an extremely low gas flow rate. Prolonging the residence time of the gas bubbles within the medium improved the efficiency of the gas transfer into the liquid phase and suppressed foam formation. An appropriate field of speed gradients prevented the bubbles from rising to the surface. This aeration method achieves an almost 90% transfer of oxygen supplied by the bubbles. Consequently, it is able to supply cells with oxygen even at high cell densities, while sparging with a gas flow of only 0.22·10^–3–1.45·10^–3 vvm (30–200 ml/h).The reactor design, the oxygen transfer rates and the high efficiency of the system are presented. Two repeated batch cultures of a rat-mouse hybridoma cell line are compared with a surface-aerated spinner culture. The used cell culture medium was serum-free, either with or without BSA and did not contain surfactants or other cell protecting agents. One batch is discussed in detail for oxygen supply, amino acid consumption and specific antibody production.     

Induction of apoptosis in oxygen-deprived cultures of hybridoma cells

It is now well documented that apoptosis represents the prevalent mode of cell death in hybridoma cultures. Apoptotic or programmed cell death occurs spontaneously in late exponential phase of batch cultures. Until lately, no specific triggering factors had been identified. Recently, we observed that glutamine, cystine or glucose deprivation induced apoptosis in both hybridoma and myeloma cell lines whereas accumulation of toxic metabolites induced necrotic cell death in these cells. Other triggering factors such as oxygen deprivation might also be responsible for induction of apoptosis. In the present study, induction of cell death by exposure to anoxia was examined in batch culture of the SP2/0-derived hybridoma D5 clone. The mode of cell death was studied by morphological examination of acridine orange-ethidium bromide stained cells in a 1.5 L bioreactor culture grown under anoxic conditions for 75 hours. Under such conditions, viable cell density levelled off rapidly and remained constant for 25 hours. After 45 hours of anoxia, cell viability had decreased to 30% and the dead cell population was found to be 90% apoptotic. In terms of cellular metabolism, anoxia resulted in an increase in the utilization rates of glucose and arginine, and in a decrease in the utilization rate of glutamine. The lactate production rate and the yield of lactate on glucose increased significantly while the MAb production rate decreased. These results demonstrate that glycolysis becomes the main source of energy under anoxic conditions.Cells incubated for 10 hours or less under anoxic conditions were able to recuperate almost immediately and displayed normal growth rates when reincubated in oxic conditions whereas cells incubated for 22 hours or more displayed reduced growth rates. Nonetheless, even after 22 h or 29 h of anoxia, cells reincubated in oxic conditions showed no further progression into apoptosis. Therefore, upon removal of the triggering signal, induction of apoptosis ceased.Abbreviations VNA Viable non-apoptotic cells - VA Viable apoptotic cells - NVNA Nonviable non-apoptotic or necrotic cells - NVA Nonviable apoptotic cells - CF Chromatin-free cells (late nonviable apoptotic cells) - AO Acridine orange - EB Ethidium Bromide - MAb Monoclocnal antibody - D.O. Dissolved oxygen - qMAb Specific MAb production rate (mg. (10⁹ cells)^–1.day^–1) - Specific growth rate (h^–1) - X_v Viable cell number (10⁵ cells.mL^–1) - X_t Total cell number (10⁵ cells.mL^–1) - Y_lac/glc Yield coefficient of lactate on glucose (mM lactate produced/mM glucose consumed)     

Determination of ammonium and L-Glutamine in hybridoma cell cultures by sequential flow injection analysis

A flow injection anlytical system based on a gas diffusion membrane module for ammonia and an ammonium flow-through potentiometric detector has been set up for measurement of L-glutamine and ammonium ions in hybridoma cell cultures. The main feature of the system is that the same basic analytical concept and equipment is used in both measurements, the only difference being for the determination of L-glutamine, in which the sample flows through an immobilized glutaminase cartridge. The conditions to enable the performance of both analysis consecutively, avoiding potential interferences by unwanted deamination of other compounds in the samples, have been determined. Finally, the proposed system has been compared with reference analytical methods for batch hybridoma cell culture experiments.     

Influence of growth rate on pigment and lipid composition of the microalgaIsochrysis aff.galbana clone T.iso

A continuous culture ofIsochrysis aff.galbana clone T.iso, used to feedPecten maximus larvae at IFREMER (Brest, France), was carried out in a chemostat at its optimum temperature for growth (26 °C). Changes in pigments, lipid class (neutral, glyco- and phospholipids) and degree of fatty acid unsaturation were studied at three different growth rates (0.33, 0.5, 1 d^–1). As predicted by chemostat theory, a slow growth rate produced higher cell numbers and higher biomass per unit volume. These cells were low in chlorophylla and carotenoids, but rich in neutral lipids. In contrast, cultures with a fast growth rate yielded lower cell concentrations, buth higher chlorophylla, carotenoid and membrane lipid contents per cell. Changes in polyunsaturated fatty acid distribution were related to differences in algal growth rates. Neutral lipids contained mainly saturated and monounsaturated fatty acids (C18:19) at low growth rates whereas they were enriched in polyunsaturated fatty acids, especially C22:63, at high growth rates. Therefore, it is suggested that the growth rate in continuous cultures be controlled so as to adjust the relative proportions of polyunsaturated fatty acids in lipid classes of the diet meant for larval nutrition.Author for correspondence     

Enhancing PCR amplification and sequencing using DNA-binding proteins

The polymerase chain reaction (PCR) is a powerful core molecular biology technique, which when coupled to chain termination sequencing allows gene and DNA sequence information to be derived rapidly. A number of modifications to the basic PCR format have been developed in an attempt to increase amplification efficiency and the specificity of the reaction. We have applied the use of DNA-binding protein, gene 32 protein from bacteriophage T4 (T4gp32) to increase amplification efficiency with a number of diverse templates. In addition, we have found that using single-stranded DNA-binding protein (SSB) or recA protein in DNA sequencing reactions dramatically increases the resolution of sequencing runs. The use of DNA-binding proteins in amplification and sequencing may prove to be generally applicable in improving the yield and quality of a number of templates from various sources.     

A Novel Method for Generating Nested Deletions Using the in Vitro Bacteriophage T3 DNA Packaging System

To sequence a DNA segment inserted into a cosmid vector underthe directed sequencing strategy, we established a simple andrapid method for generating nested deletions which uses thein vitro packaging system of bacteriophage T3 DNA. The principleis based on the previous finding that this system can translocateany linear double-stranded DNA up to 40 kb into the phage capsidin a time-dependent manner and the encapsulated DNA becomesDNase-resistant. For this purpose, we constructed a cosmid vectorthat carries two different antibiotic selection markers at bothsides of the multiple cloning site, and after insertion of aDNA segment, the clone was linearized by -terminase at the cossite. After the packaging reaction in vitro followed by DNasetreatment, the encapsulated DNA was introduced into Escherichiacoli cells to give clones with unidirectional deletions by differentialantibiotic selection. Restriction and sequence analyses of deletionclones demonstrated that an ordered set of clones with nesteddeletions, ranging from less than 1 kb to 25 kb, was createdfrom either the end of the DNA segment. Thus, nested deletionclones that cover the entire region of a 40-kb cosmid insertcan be obtained by a single packaging reaction, and its restrictionmap can be simultaneously obtained.     

Overexpression of cloned genes using recombinant Escherichia coli regulated by a T7 promoter: II. Two-stage continuous cultures and model simulations

A two-stage culture strategy was studied for continuous high-level production of a foreign protein in the chemically inducible T7 expression system. The first stage is dedicated to the maintenance of plasmid-bearing cells and the second stage to the target protein synthesis by induction of cells coming from the first stage. On entering the second stage, recombinant cells undergo a gradual induction of the target gene expression. These plasmid-bearing cells experience dynamic changes in intracellular compositions and specific growth rates with their individual residence times. Therefore, the overall cultural characteristics in the production stage are really averages of the contributions from the various cells with different residence times. The behavior of the two-stage culture is described by a model, which accounts for dynamic variations of cell growth and protein synthesis rates with cell residence times. Model simulations were compared with experimental results at a variety of operating conditions such as inducer concentration and dilution rate. This model is useful for understanding the behavior of two-stage continuous cultures. (c) 1993 John Wiley & Sons, Inc.     

Molecular integrity of monoclonal antibodies produced by hybridoma cells in batch culture and in continuous-flow culture with integrated product recovery

The molecular integrity of monoclonal antibodies (MCAB) produced by murine hybridoma cell line TB/C3 was studied in batch and continuous-flow cultures. In batch culture, one band of MCAB was detected initially by Western blotting of sodium dodecyl sulfate (SDS)-polyacrylamide gels run under unreduced conditions, but heterogenous MCAB bands appeared as the culture aged. The latter were due to the degradation of MCAB by proteases active at the neutral pH of the culture. The deleterious effect of proteases was minimized in the continuous-flow cultures which were integrated for product recovery. The MCAB of high quality was purified over 26 days from a culture grown at a dilution rate of 0.025 h(-1) (experiment 1). However, at a lower dilution rate of 0.015 h(-1) (experiment 2), the integrity of MCAB was compromised after the initial 13 days of culture. This was shown to be due to the variation in the carbohydrate content of MCAB produced, as judged by the increased sialylation of heavy chains and the varied reactivity of MCAB with lectins (Maackia amurensis agglutinin, Galanthus nivalis agglutinin, and Datura stramonium agglutinin) as the age of the culture increased. The concentration of the purified MCAB samples by enzyme-linked immunosorbent assay (ELISA) (used normally) was usually higher than that estimated by absorbance at 280 nm. Best correlation between the two methods (ELISA-280 nm ratio of 1.02-1.25) was obtained with experiment 1 samples. This ratio increased in experiment 2 and batch culture samples as the heterogeneity of MCAB produced increased, being 1.03-2.94 and 2.53-4.62, respectively. Therefore, ELISA overestimated MCAB concentration when the molecular integrity of the latter was compromised. The ELISA-A(280) nm ratio might hence provide a useful indicator for assessing the quality of MCAB produced. Comparison of SDS-polyacrylamide gels stained with Coomassie Brilliant Blue R and silver showed that the former correlated better with the MCAB activity stain, whereas the silver stained both the protein- and carbohydrate-rich components. Comparison of the patterns produced with these two stains might therefore offer another parameter to monitor the overall integrity of MCAB produced. Finally, the data presented have important implications on the validity of using long-term and intensive cultures for generating MCAB because such cultures would be subjected to the additive effects reported for batch and continuous modes of growth. (c) 1993 John Wiley & Sons, Inc.     

Substantial overproduction of antibodies by applying osmotic pressure and sodium butyrate

Much of the current cell technology has enabled increased antibody production levels due to judicious nutrient feeding to raise cell densities and design better bioreactors. This study demonstrates that hybridomas can be hyperstimulated to produce higher immunoglobulin (lg) levels by suppressing cell growth and increasing culture longevity through adaptation to higher osmolarity media and addition of sodium butyrate. Prior to adaptation, cells placed in higher osmotic pressures (350 and 400 mOsm) were severely suppressed in growth down to 25% of the control (300 mOsm), although total lg titers achieved were similar to the control, approximately 140 mg/L. After a week of adaptation to 350 and 400 mOsm media, cell growth was not as dramatically suppressed, but considerably higher lg levels were attained at these elevated osmolarities. The highest yield of 265 mg/L was obtained at 350 mOsm compared to 140 mg/L at 300 mOsm, while maximum viable cell numbers dropped from 35 x 10(5) cells/mL to 31 x 10(5) cells/mL and culture longevity was extended by 20 h more than the control. Sodium butyrate, known to enhance protein production in other cell types, was then supplemented at a range of concentrations between 0.01 and 0.4 mM to the 350 mOsm culture to further enhance the lg levels. Butyrate at a concentration of 0.1 mM, in combination with osmotic pressure at 350 mOsm, further elevated the lg levels to 350 mg/L. Concomitantly, maximum viable cell numbers were reduced to 22 x 10(5) cells/mL, but culture longevity was extended by 40 h in the 0.1 mM butyrate supplemented culture compared to the control condition. Specific antibody productivity, q(Mab), continued to stay high during the stationary phase and was further elevated during the decline phase: thus, overall lg levels can be increased by 2.3 times by combining osmotic pressure and butyrate treatment. (c) 1993 John Wiley & Sons, Inc.