Seasonal changes of the ultrastructure of the pars tuberalis of the hypophysis of Rana temporaria

Summary In the pars tuberalis of the hypophysis of Rana temporaria, which shows the ultrastructural characteristics of a polypeptide hormone secreting endocrine gland, seasonal changes of the ultrastructure are described. In accordance with the literature, these seasonal changes of ultrastructure are interpreted as the morphological expression of seasonal changes of endocrine activity of the pars tuberalis.     

Characterization of Viticultural Terroirs using a Simple Field Model Based on Soil Depth – II. Validation of the Grape Yield and Berry Quality in the Anjou Vineyard (France)

Soil and climate are major constituents of the French notion of Terroir. This concept implies that there is a strong relationship between the composition of the grape, the characteristics of the wine and the territory of production. To study this link, a new method of characterization of the Terroir, including geological and pedological factors, was investigated. It uses a field model based on depth and clay content of soil, together with the degree of weathering of the parent rock. Consequently, for every type of parent rock belonging to a given geologic stage, there are a series of soils that show different stages of pedological evolution. According to the model, three kinds of soils are distinguished with regards to the weathering intensity of the parent rock, that are named weakly weathered rock (WWR), moderately weathered rock (MWR) and strongly weathered rock (SWR). By hypothesis, each soil type is considered as a homogeneous unit for vine production from the viewpoint of ecophysiological factors. Each terroir unit defined by this method is called a Basic Terroir Unit (BTU). To validate this hypothesis, experimental plots planted with Chenin and Cabernet Franc vines were studied over three consecutive seasons (2000–2002), in the Anjou vineyard (Loire Valley – France). The major BTUs developed on the two most important geological systems of Anjou (Brioverian and Ordovician–Devonian), were studied. Results showed that the berries of vines cultivated in WWR were significantly smaller, richer in sugars and anthocyanins and had a Total Phenolic Index higher than those of the vines cultivated in SWR. They also had a lower titratable acidity. Cabernet Franc vines cultivated in MWR had berries with sugar and anthocyanin contents but also total phenolics very close to those of WWR. With Chenin vines there was a good relationship between the global pool of free aromas of berries and the BTU type. The study showed significant relationships between the quality of grapes and the measured values of several ecophysiological variables such as the water supply regime or the timing of budburst.     

Determination of ovulation and pregnancy in the marmoset (Callithrix jacchus) by monitoring of urinary hydroxypregnanolone excretion

In Callithrix jacchus the urinary excretion of hydroxypregnanolone (5 alpha-pregnane-3 alpha, 7 alpha-diol-20-one) shows a luteal rise during the ovulatory cycle. This progesterone metabolite can therefore be used as an indication of ovulation, implantation, and subsequently for the persistence of the pregnancy. The excretion can be monitored by high performance thin-layer chromatography (HPTLC) and postchromatographic derivatization after enzymatic hydrolysis of the conjugate. Profiles of urinary hydroxypregnanolone levels are presented and correlated with luteinizing hormone excretion. The method is noninvasive and therefore suited for long-term studies in these monkeys.     

An Estimation Procedure for the Joint Distribution of Spatial Direction and Thickness of Flat Bodies Using Vertical Sections. Part II: An application in soil micromorphology

In soil micromorphology fissures are considered in vertical sections. To get information about the properties of the soil the joint distribution of spatial direction and width of these fissures is of interest. The fissures are mathematically generalized to flat bodies which are defined as stationary weighted surface processes with the weight “thickness”. In a typical point of the surface process suitable, joint parametric distributions of direction and thickness are assumed. The parameters have to be estimated from measurements on vertical sections which are taken from the soil. On these sections only a visible thickness and a visible angle can be observed. The joint distribution of these variables can be expressed by the joint distribution of spatial direction and thickness with the same parameters and in this indirect way the parameters can be estimated. The paper describes how to randomize the vertical section and how to measure the visible variables on the sections. The Chi-Square method is proposed for the parameter estimation. Further it is discussed how to derive good starting values for the numerical procedure. All this is demonstrated in a simulation study using the Bingham-Mardia distribution for the direction and the lognormal distribution for the thickness including a way to correlate the mean thickness and the direction. Finally an application in soil micromorphology is demonstrated for one soil horizon.     

The effect of behavioural and morphological plasticity on foraging efficiency in the threespine stickleback (Gasterosteus sp.)

We conducted an experiment to assess the change in foraging efficiency resulting from diet-induced morphological and behavioural plasticity in a species of freshwater, threespine stickleback (Gasterosteus sp.). Different degrees of morphological and behavioural change were induced using two prey items commonly found in the diet of this species, allowing us to estimate the relative importance of each type of plasticity. The purpose of the experiment was twofold. First, earlier work had suggested that diet variability might be an important factor in the evolution of trophic morphological plasticity in sticklebacks. The present results extend this work by revealing the adaptive significance of morphological plasticity. The current experiment also qualitatively assessed the compatibility of the time scale of morphological change with that of the natural resource variability experienced by this species. The results indicate that diet-induced plasticity improves foraging efficiency continuously for up to 72 days of prey exposure. This is probably due in part to plasticity of the external trophic morphology but our results also suggest a complex interplay between morphology and behaviour. The time scale appears to be matched to that of natural diet variability although it is possible that some traits exhibit non-labile plasticity. Our discussion highlights the important distinction between conditions favouring the evolution of labile versus non-labile plasticity. The second objective of the experiment was to determine the relative importance of morphological and behavioural plasticity. Few studies have attempted to quantify the adaptive significance of morphological plasticity and no study to our knowledge has separated the effects of morphological and behavioural plasticity. Our experiment reveals that both behavioural and morphological plasticity are important and it also suggests a dichotomy between the two: behavioural plasticity predominately affects searching efficiency whereas morphological plasticity predominately affects handling efficiency.     

Biological rhythms in birds — development, insights and perspectives

The aim of this review is to show that probably the internal clock of precocial birds is imprinted in the prenatal period by exogenous factors (zeitgeber). The activity of organ functions occurs early during embryonic development, before this function is ultimately necessary to ensure the survival of the embryo. Prenatal activation of some functional systems may have a training effect on the postnatal efficiency.The development of physiological control systems is influenced by endogenous and exogenous factors during the late prenatal and early postnatal period: epigenetic adaptation processes play an important role in the development of animals; they have acquired characteristics which are innated but not genetically fixed. As a rule, the actual value during the determination period has a very strong influence on the set-point of the system. This will be explained using the example of thermoregulation.It is shown in detail that it seems to be possible to imprint the prenatal development of circadian rhythms by periodic changes of the light-dark cycle but not by rhythmic influence of acoustic signals.Altogether, there are more questions open than solved concerning the perinatal genesis of circadian rhythms in birds. Topics are given for the future research.     

Effect of arm-shoulder fatigue on carpenters at work

The purpose of the study was to analyse the effect of arm-shoulder fatigue on manual performance. Ten experienced carpenters performed three standardized tasks (nailing, sawing and screwing). Electromyographic activity was recorded from six arm-shoulder muscles and the performances were video-filmed. After 45 min of standardized arm-cranking (arm-shoulder-fatiguing exercise of approximately 70%-80% maximal oxygen consumption), the tasks were repeated. The number of work movements and the time taken for each task were recorded and the quality of the work performed was compared. After the fatiguing exercise, only nailing was perceived as being harder and more mistakes were made during nailing and sawing. Movement performance was not influenced during nailing but was slightly slower during sawing and faster during screwing. However, there were increased mean EMG amplitudes in the upper trapezius and biceps muscles during nailing, in the upper trapezius, anterior deltoid and infraspinatus muscles during sawing and in the anterior deltoid muscle during screwing. Of the muscles studied the upper trapezius and anterior deltoid muscles increased their activity most after the arm-shoulder-fatiguing exercise.     

Mate detection success of maleClethrionomys rufocanus in relation to the spatial distribution of sexually receptive females

Summary Mate detection success of male grey-sided voles,Clethrionomys rufocanus, in relation to the spatial distribution of sexually receptive females was studied in an experimental island population. The spatiotemporal distribution of receptive females was controlled by containing females in small, mobile wire-mesh cages, whereas the response by free-ranging males was monitored by means of radiotelemetry. Males were on average more successful in finding oestrous females when females were spatially clumped than when females were spatially overdispersed. In addition, the variance (CV) in male mate detecting success was highest when females had an overdispersed spatial distribution. These results are consistent with predictions from a theoretical model (Ims, 1988b) analysing the effect of mate distribution on male mating success, and with empirical results on prey detection success of predators searching for prey.     

Wood preservation hygiene and environment in the lime-light of actually

Summary Under the ?Bois plus? scheme, the CTBA is currently developing a third party certification, based on the Scrivener law, with the aim of defending the consumers' interests. At this early stage, wood preservatives and treated wood are checked for the efficacy of treatments in order to ensure the stability and security of works in buildings and civil engineering. According to the different classes of risks in service, ?Bois plus? provides the most adeguate level of protection. In the close future, the industry is planning to incorporate, with the help of the CTBA and experts, health criteria within the frame of the ?Bois plus? certification scheme. The means could beSafety indexes, which are objectives of quality for professionals.Safety indexes are concentrations of substances in wood which can be taken as safe for humans and the general environment, while still toxic for the wood pests. This attractive experience aims to make with the brandname ?Bois plus? a synonym of efficacy and safety. This approach meets the essential requirements 1, 3, 4 of the 89/106 EEC directive: mechanical resistance and stability/hygiene, health and environment/safety in use.