Interrelationship of Meloidogyne hapla and Ditylenchus dipsaci on Resistant and Susceptible Alfalfa

Simultaneous inoculations of alfalfa with Meloidogyne hapla larvae and Ditylenchus dipsaci at 16, 20, 24, and 28 C did not depress penetration of either nematode in ''Nev Syn XX'' -a selection resistant to M. hapla and D. dipsaci, ''Vernal 298'' -a selection resistant to M. hapla and susceptible to D. dipsaci, ''Lahontan'' -a cultivar resistant to D. dipsaci and susceptible to M. hapla, and ''Ranger'' -a cultivar susceptible to both M. hapla and D, dipsaci. Infection with D. dipsaci depressed growth of susceptible ''Vernal 298'' and ''Ranger'' at all soil temperatures, except for ''Vernal 298'' at 16 C. Infection with M. hapla alone did not depress growth of any of the alfalfas. A combination of M. hapla and D. dipsaci resulted in a synergistic weight depression on ''Ranger'' at all soil temperatures. Inoculation of the four alfalfas with D. dipsaci 2, 4, 6, and 8 wk before inoculation with M. hapla at 16, 20, 24, and 28 C did not influence the resistance or susceptibility of ''Nev Syn XX,'' ''Lahontan,'' or ''Ranger.'' However, galling of ''Vernal 298'' by M. hapla was affected by soil temperature, plant age, and inoculation with D. dipsaci.     

Cryo-section immunolabelling of difficult to preserve specimens: advantages of cryofixation, freeze-substitution and rehydration

BACKGROUND INFORMATION: Electron microscopic immunolabelling of ultrathin thawed cryo-sections, according to the method of Tokuyasu, is widely used as a very sensitive high-resolution localization technique. Its main advantages are that antigens remain in a hydrated environment prior to immunolabelling, and that antigen accessibility is improved compared with resin section labelling. However, the quality of structural appearance and antigenicity depends highly on the limitations of the initial conventional chemical fixation step, such as slow diffusion and selective reaction/cross-linking of fixative molecules. RESULTS AND CONCLUSIONS: Cryofixation, instead of conventional chemical fixation, followed by freeze-substitution/chemical fixation, rehydration and further processing for Tokuyasu cryo-sectioning leads to an improved preservation of both ultrastructure and antigenicity. This is especially true for tissues which are difficult to preserve by conventional chemical fixation at ambient temperatures, such as plant material, Drosophila embryos or nematode tissue. In particular labile and highly dynamic structures (for example, microtubules and Golgi apparatus) are remarkably better preserved. These improvements are also valid for light microscopic applications.     

Development of secondary pine forests after pine wilt disease in western Japan

Abstract. The development of secondary Pinus densiflora (Japanese red pine) forests after pine wilt disease was studied through phytosociological analysis, estimation of forest structure before disease and size-structure, tree ring and stem analyses. Following the end of the disease, the growth of previously suppressed small oak trees was accelerated. This is quite different from the development of forests following fire, which starts with the establishment of pine seedlings. Pine wilt disease shifted the dominance of secondary forests from Pinus densiflora to Quercus serrata oak forest. In pine forests, disturbance by fire is important for forest maintenance. In contrast, disturbance by pine wilt disease leads to an acceleration of succession from pine forest to oak forest.     

Preclinical derivation and imaging of autologously transplanted canine induced pluripotent stem cells

Derivation of patient-specific induced pluripotent stem cells (iPSCs) opens a new avenue for future applications of regenerative medicine. However, before iPSCs can be used in a clinical setting, it is critical to validate their in vivo fate following autologous transplantation. Thus far, preclinical studies have been limited to small animals and have yet to be conducted in large animals that are physiologically more similar to humans. In this study, we report the first autologous transplantation of iPSCs in a large animal model through the generation of canine iPSCs (ciPSCs) from the canine adipose stromal cells and canine fibroblasts of adult mongrel dogs. We confirmed pluripotency of ciPSCs using the following techniques: (i) immunostaining and quantitative PCR for the presence of pluripotent and germ layer-specific markers in differentiated ciPSCs; (ii) microarray analysis that demonstrates similar gene expression profiles between ciPSCs and canine embryonic stem cells; (iii) teratoma formation assays; and (iv) karyotyping for genomic stability. Fate of ciPSCs autologously transplanted to the canine heart was tracked in vivo using clinical positron emission tomography, computed tomography, and magnetic resonance imaging. To demonstrate clinical potential of ciPSCs to treat models of injury, we generated endothelial cells (ciPSC-ECs) and used these cells to treat immunodeficient murine models of myocardial infarction and hindlimb ischemia.     

Some Ultrastructural Changes Induced in Resistant and Susceptible Soybean Roots Following Infection by Rotylenchulus reniformis

A developmental electron microscopic study of the parasitism of Rolylenchulus reniforrnis in resistant ''Peking'' and susceptible ''Lee'' soybeans was made during a 21-day period under controlled conditions. Within 2 days of inoculation, the nematode had penetrated the cortical cells to the endodermis where it inserted its stylet, secreted and initiated syncytial formation and cell hypertrophy. Syncytia primarily involved pericycle tissues and, to a lesser extent, xylem parenchyma and endodermis. When identifiable, the cell into which the nematode stylet was inserted to initiate syncytial development was endodermal. Susceptible tissues exhibited two basic phases of development during this infection period: (i) an initial phase represented by partial cell wail lysis and separation; and (ii) an anabolic phase, characterized by organelle proliferation and development accompanied by secondary wall deposits, which provided nutrition for sessile female development. The resistant or hypersensitive reaction (HR) lacked the anabolic phase found in the susceptible reaction, and was characterized by an extension and usually accelerated type of Iysis found in the first phase of the syncytial development. The HR was usually very evident 4 days after inoculation, and could be identified by an almost complete lysis of the cell walls and cytoplasm. The possibility that the initial cell of the developing syncytium or "prosyncyte" may influence a susceptible or resistant reaction is discussed. Successive stages of cell wall dissolution and the deposition of secondary cell walls are described.     

Endogenous APOBEC3B restricts LINE-1 retrotransposition in transformed cells and human embryonic stem cells

Members of the APOBEC3 (A3) family of cytidine deaminase enzymes act as host defense mechanisms limiting both infections by exogenous retroviruses and mobilization of endogenous retrotransposons. Previous studies revealed that the overexpression of some A3 proteins could restrict engineered human Long INterspersed Element-1 (LINE-1 or L1) retrotransposition in HeLa cells. However, whether endogenous A3 proteins play a role in restricting L1 retrotransposition remains largely unexplored. Here, we show that HeLa cells express endogenous A3B and A3C, whereas human embryonic stem cells (hESCs) express A3B, A3C, A3DE, A3F, and A3G. To study the relative contribution of endogenous A3 proteins in restricting L1 retrotransposition, we first generated small hairpin RNAs (shRNAs) to suppress endogenous A3 mRNA expression, and then assessed L1 mobility using a cell-based L1 retrotransposition assay. We demonstrate that in both HeLa and hESCs, shRNA-based knockdown of A3B promotes a ～2-3.7-fold increase in the retrotransposition efficiency of an engineered human L1. Knockdown of the other A3s produced no significant increase in L1 activity. Thus, A3B appears to restrict engineered L1 retrotransposition in a broad range of cell types, including pluripotent cells.     

Stem cell culture engineering - process scale up and beyond

Advances in stem cell research and recent work on clinical trials employing stem cells have heightened the prospect of stem cell applications in regenerative medicine. The eventual clinical application of stem cells will require transforming cell production from laboratory practices to robust processes. Most stem cell applications will require extensive ex vivo handling of cells, from isolation, cultivation, and directed differentiation to product cell separation, cell derivation, and final formulation. Some applications require large quantities of cells in each defined batch for clinical use in multiple patients; others may be for autologous use and require only small-scale operations. All share a common requirement: the production must be robust and generate cell products of consistent quality. Unlike the established manufacturing process of recombinant protein biologics, stem cell applications will likely see greater variability in their cell source and more fluctuations in product quality. Nevertheless, in devising stem cell-based bioprocesses, much insight could be gained from the manufacturing of biological materials, including recombinant proteins and anti-viral vaccines. The key to process robustness is thus not only the control of traditional process chemical and physical variables, but also the sustenance of cells in the desired potency or differentiation state through controlling non-traditional variables, such as signaling pathway modulators.     

Attachment of Pasteuria penetrans Endospores to the Surface of Meloidogyne javanica Second-stage Juveniles

Pasteuria penetrans spore adhesion to Meloidogyne javanica second-stage juveniles (J2) was examined following several different pretreatments of the latter. The detergents sodium dodecyl sulfate and Triton X-100, the carbohydrates fucose and α-methyl-D-mannoside, and the lectins concanavalin A and wheat germ agglutinin reduced spore attachment. Spores exposed to M. javanica surface coat (SC) extract exhibited decreased adherence to the J2 surface. Second-stage juveniles that had been treated with antibodies recognizing a 250-kDa antigen of J2 SC extract had fewer spores attached to their surfaces, as compared to nontreated J2, except in the head region. This inhibition pattern was similar to that of antibody-labelling on M. javanica J2 as observed by electron microscopy. It is suggested that several SC components, such as carbohydrate residues, carbohydrate-recognition domains, and a 250-kDa antigen, are involved in P. penetrans spore attachment to the surface of M. javanica.