Pasture dry matter intake per cow in intensive dairy production systems: effects of grazing and feeding management

The competitiveness and sustainability of low input cost dairy production systems are generally supported by efficient use of pasture in the diets. Therefore, pasture intake directly affects overall efficiency of these systems. We aimed to assess feeding and grazing management main factors that affect pasture dry matter intake (DMI) in commercial dairy farms during the different seasons of the year. Fortnightly visits to 28 commercial dairies were carried out between June 2016 and May 2017 to record production and price, supplement offered and price, pasture access time (PAT), herbage mass (HM) and allowance (HA). Only farms with the most contrasting estimated pasture DMI per cow (eDMI) were compared as systems with high (HPI; N = 8) or low (LPI; N = 8) pasture DMI. Despite a lower individual milk production in HPI than LPI (19.0 v. 23.3 ± 0.7 l/cow, P < 0.01), daily margin over feeding cost was not different between groups (3.07 v. 2.93 ± 0.15 U$S/cow for HPI and LPI, respectively). During autumn and winter, HPI cows ingested more pasture than LPI cows (8.3 v. 4.6 and 5.9 v. 2.9 ± 0.55 kg DM/cow per day, respectively, P < 0.01) although PAT, HM and HA were similar between groups. Both groups offered high supplementation levels during these seasons, even though greater in LPI than HPI (14.7 v. 9.7 ± 0.7 kg DM supplement/cow per day, respectively, P < 0.01). On the other hand, differences between groups for both pasture and supplement DMI were more contrasting during spring and summer (13.1 v. 7.3 ± 0.5 and 4.0 v. 11.4 ± 0.4 kg DM/cow per day for HPI and LPI, respectively, P < 0.01), with higher PAT in both seasons (P < 0.05) and higher HA during summer in HPI than LPI (P < 0.01). Unlike LPI, during these seasons HPI adjusted offered supplement according to HA, achieving a higher pasture eDMI and making more efficient use of available pastoral resource than LPI. As there was no grazing limiting condition for pasture harvesting in either group, the main factor affecting pasture DMI was a pasture by supplement substitution effect. These results reinforce the importance of an efficient grazing management, and using supplements to nutritionally complement pasture intake rather than as a direct way to increase milk production.     

Linking Material Flow Analysis with Environmental Impact Potential

Technology transition can have significant implications on the evolution of environmental impact potential of disposed electronics over time. Considering technology transition, we quantify the temporal behavior of ecological and human health impact potential from select heavy metals in electronic waste (e‐waste). The case study analyzes product substitution effects in two electronic cohorts from the U.S. market: (1) computers (laptops substituting for desktops) and (2) televisions (flat‐panel liquid crystal displays [LCDs] and plasma displays substituting for cathode‐ray tubes [CRTs]). Quantities of end‐of‐life (EoL) units to year 2030 are forecasted by the unique combination of dynamic material flow analysis, logistic trend analysis, and product lifespan calibration methods. Metal content from EoL units are assessed via a pathway and effect model using USETox? characterization factors to determine the toxicity potential attributed to heavy metal releases into different media (e.g., air, water, and soil) as an indicator of environmental burden. Results show high impact materials such as lead, nickel, and zinc cause changes in human health toxicity potential and copper causes changes in ecological toxicity potential. Effects of dematerialization, such as reduced metal content in laptops over desktops, provide some positive benefits in toxicity potential per product. However, from a market perspective, emerging e‐waste quantities created by increasing per capita penetration rates of electronics and increasing population will offset gains in environmental performance at the product level. The resulting analysis provides guidance on the timing expected for emerging EoL units and an indication of high impact potential materials requiring pollution prevention as product substitution occurs.     

Cryo‐Immunoelectron Microscopy of Adherent Cells Improved by the Use of Electrospun Cell Culture Substrates

Electrospun nanofibres are an excellent cell culture substrate, enabling the fast and non‐disruptive harvest and transfer of adherent cells for microscopical and biochemical analyses. Metabolic activity and cellular structures are maintained during the only half a minute‐long harvest and transfer process. We show here that such samples can be optimally processed by means of cryofixation combined either with freeze‐substitution, sample rehydration and cryosection‐immunolabelling or with freeze‐fracture replica‐immunolabelling. Moreover, electrospun fibre substrates are equally suitable for complementary approaches, such as biochemistry, fluorescence microscopy and cytochemistry.     

Comparative genomics of four Liliales families inferred from the complete chloroplast genome sequence of Veratrum patulum O. Loes. (Melanthiaceae)

The sequence of the chloroplast genome, which is inherited maternally, contains useful information for many scientific fields such as plant systematics, biogeography and biotechnology because its characteristics are highly conserved among species. There is an increase in chloroplast genomes of angiosperms that have been sequenced in recent years. In this study, the nucleotide sequence of the chloroplast genome (cpDNA) of Veratrum patulum Loes. (Melanthiaceae, Liliales) was analyzed completely. The circular double-stranded DNA of 153,699 bp consists of two inverted repeat (IR) regions of 26,360 bp each, a large single copy of 83,372 bp, and a small single copy of 17,607 bp. This plastome contains 81 protein-coding genes, 30 distinct tRNA and four genes of rRNA. In addition, there are six hypothetical coding regions (ycf1, ycf2, ycf3, ycf4, ycf15 and ycf68) and two open reading frames (ORF42 and ORF56), which are also found in the chloroplast genomes of the other species. The gene orders and gene contents of the V. patulum plastid genome are similar to that of Smilax china, Lilium longiflorum and Alstroemeria aurea, members of the Smilacaceae, Liliaceae and Alstroemeriaceae (Liliales), respectively. However, the loss rps16 exon 2 in V. patulum results in the difference in the large single copy regions in comparison with other species. The base substitution rate is quite similar among genes of these species. Additionally, the base substitution rate of inverted repeat region was smaller than that of single copy regions in all observed species of Liliales. The IR regions were expanded to trnH_GUG in V. patulum, a part of rps19 in L. longiflorum and A. aurea, and whole sequence of rps19 in S. china. Furthermore, the IGS lengths of rbcL-accD-psaI region were variable among Liliales species, suggesting that this region might be a hotspot of indel events and the informative site for phylogenetic studies in Liliales. In general, the whole chloroplast genome of V. patulum, a potential medicinal plant, will contribute to research on the genetic applications of this genus.     

Theoretical Calculations on Zeolites: The Aluminium Substitution in Mordenite,Ferrierite and ZSM-5

Abstract

The experimental determination of Al siting in zeolites involves the use of multiple techniques. Great effort has been made on both, experimental and theoretical approaches. The present study presents a novel methodology for calculating Al/Si replacement energies. Simple semiempirical calculations were applied on Modenite, Ferrierite and ZSM-5 zeolites, resulting in good agreement with the experimetal evidences. We have found that the favored Al substitution sites are T3 and T4 in Mordenite, while T2 and T4 are in Ferrierite, and only the T9 site is favored in ZSM-5. The method presented is based on an average of partial Al/Si replacement energies, evaluated for all rings belonging to each T site, rather than in the calculation of a total replacement energy evaluated for only one representative aggregate.     

Electrotactile stimulation on the tongue: Intensity perception,discrimination, and cross-modality estimation

Due to its high sensitivity and conductivity, electrotactile stimulation (ETS) on the tongue has proven to be a useful and technically convenient tool to substitute and/or augment sensory capabilities. However, most of its applications have only provided spatial attributes and little is known about (a) the ability of the tongue's sensory system to process electrical stimuli of varying magnitudes and (b) how modulation of ETS intensity affects subjects’ ability to decode stimulus intensity. We addressed these questions by quantifying: (1) the magnitude of the dynamic range (DR; maximal comfortable intensity/perception threshold) and its sensitivity to prolonged exposure; (2) subjects’ ability to perceive intensity changes; and (3) subjects’ ability to associate intensity with angular excursions of a protractor's handle. We found that the average DR (17 dB) was generally large in comparison with other tactile loci and of a relatively constant magnitude among subjects, even after prolonged exposure, despite a slight but significant upward drift (p < 0.001). Additionally, our results showed that as stimulus intensity increased, subjects’ ability to discriminate ETS stimuli of different intensities improved (p < 0.05) while estimation accuracy, in general, slightly decreased (increasing underestimation). These results suggest that higher ETS intensity may increase recruitment of rapidly adapting mechanoreceptor fibers, as these are specialized for coding stimulus differences rather than absolute intensities. Furthermore, our study revealed that the tongue's sensory system can effectively convey electrical stimuli despite minimal practice and when information transfer is limited by memory and DR drift.     

A polymetamorphic protein

Arc repressor is a homodimeric protein with a ribbon‐helix–helix fold. A single polar‐to‐hydrophobic substitution (N11L) at a solvent‐exposed position leads to population of an alternate dimeric fold in which 3₁₀ helices replace a β‐sheet. Here we find that the variant Q9V/N11L/R13V (S‐VLV), with two additional polar‐to‐hydrophobic surface mutations in the same β‐sheet, forms a highly stable, reversibly folded octamer with approximately half the?α‐helical content of wild‐type Arc. At low protein concentration and low ionic strength, S‐VLV also populates both dimeric topologies previously observed for N11L, as judged by NMR chemical shift comparisons. Thus, accumulation of simple hydrophobic mutations in Arc progressively reduces fold specificity, leading first to a sequence with two folds and then to a manifold bridge sequence with at least three different topologies. Residues 9–14 of S‐VLV form a highly hydrophobic stretch that is predicted to be amyloidogenic, but we do not observe aggregates of higher order than octamer. Increases in sequence hydrophobicity can promote amyloid aggregation but also exert broader and more complex effects on fold specificity. Altered native folds, changes in fold coupled to oligomerization, toxic pre‐amyloid oligomers, and amyloid fibrils may represent a near continuum of accessible alternatives in protein structure space.     

Determination of endogenous faecal phosphorus loss in goats

Four black Liuyang wether goats were fed with corn stover and concentrate formulated to contain four levels of dietary phosphorus (P), including 0.129, 0.140, 0.162 and 0.180% of P. In a 4 × 4 Latin square experiment the endogenous faecal P loss was determined by the regression technique and the substitution method. Treatment effects on faecal and urinary P output, apparent P digestibility and P retention, and saliva P secretion were not significant. A linear relationship was observed between apparent faecal digestible P (Y, g/kg DMI) and P intake (X, g/kg DMI), which was described by the equation: Y = 0.4799X ?0.9209, r² = 0.9869, (p < 0.05). The true P digestibility determined by the regression technique and the substitution method amounted to 48.0 and 48.9%, respectively; the recorded endogenous faecal P losses were 0.92 and 0.93 g/kg DMI, respectively. The study demonstrated the potential of the regression method as well as the substitution method for estimation of true P digestibility and endogenous faecal P losses in goats.     

Net climate impacts of forest biomass production and utilization in managed boreal forests

In this work, we studied the potentials offered by managed boreal forests and forestry to mitigate the climate change using forest‐based materials and energy in substituting fossil‐based materials (concrete and plastic) and energy (coal and oil). For this purpose, we calculated the net climate impacts (radiative forcing) of forest biomass production and utilization in the managed Finnish boreal forests (60°–70°N) over a 90‐year period based on integrated use forest ecosystem model simulations (on carbon sequestration and biomass production of forests) and life‐cycle assessment (LCA) tool. When studying the effects of management on the radiative forcing in a system integrating the carbon sink/sources dynamics in both biosystem and technosystem, the current forest management (baseline management) was used a reference management. Our results showed that the use of forest‐based materials and energy in substituting fossil‐based materials and energy would provide an effective option for mitigating climate change. The negative climate impacts could be further decreased by maintaining forest stocking higher over the rotation compared to the baseline management and by harvesting stumps and coarse roots in addition to logging residues in the final felling. However, the climate impacts varied substantially over time depending on the prevailing forest structure and biomass assortment (timber, energy biomass) used in substitution.