Cross-beta order and diversity in nanocrystals of an amyloid-forming peptide

The seven-residue peptide GNNQQNY from the N-terminal region of the yeast prion protein Sup35, which forms amyloid fibers, colloidal aggregates and highly ordered nanocrystals, provides a model system for characterizing the elusively protean cross-beta conformation. Depending on preparative conditions, orthorhombic and monoclinic crystals with similar lath-shaped morphology have been obtained. Ultra high-resolution (<0.5A spacing) electron diffraction patterns from single nanocrystals show that the peptide chains pack in parallel cross-beta columns with approximately 4.86A axial spacing. Mosaic striations 20-50 nm wide observed by electron microscopy indicate lateral size-limiting crystal growth related to amyloid fiber formation. Frequently obtained orthorhombic forms, with apparent space group symmetry P2(1)2(1)2(1), have cell dimensions ranging from /a/=22.7-21.2A, /b/=39.9-39.3A, /c/=4.89-4.86A for wet to dried states. Electron diffraction data from single nanocrystals, recorded in tilt series of still frames, have been mapped in reciprocal space. However, reliable integrated intensities cannot be obtained from these series, and dynamical electron diffraction effects present problems in data analysis. The diversity of ordered structures formed under similar conditions has made it difficult to obtain reproducible X-ray diffraction data from powder specimens; and overlapping Bragg reflections in the powder patterns preclude separated structure factor measurements for these data. Model protofilaments, consisting of tightly paired, half-staggered beta strands related by a screw axis, can be fit in the crystal lattices, but model refinement will require accurate structure factor measurements. Nearly anhydrous packing of this hydrophilic peptide can account for the insolubility of the crystals, since the activation energy for rehydration may be extremely high. Water-excluding packing of paired cross-beta peptide segments in thin protofilaments may be characteristic of the wide variety of anomalously stable amyloid aggregates.     

Cryo-negative staining reveals conformational flexibility within yeast RNA polymerase I

The structure of the yeast DNA-dependent RNA polymerase I (RNA Pol I), prepared by cryo-negative staining, was studied by electron microscopy. A structural model of the enzyme at a resolution of 1.8 nm was determined from the analysis of isolated molecules and showed an excellent fit with the atomic structure of the RNA Pol II Delta4/7. The high signal-to-noise ratio (SNR) of the stained molecular images revealed a conformational flexibility within the image data set that could be recovered in three-dimensions after implementation of a novel strategy to sort the "open" and "closed" conformations in our heterogeneous data set. This conformational change mapped in the "wall/flap" domain of the second largest subunit (beta-like) and allows a better accessibility of the DNA-binding groove. This displacement of the wall/flap domain could play an important role in the transition between initiation and elongation state of the enzyme. Moreover, a protrusion was apparent in the cryo-negatively stained model, which was absent in the atomic structure and was not detected in previous 3D models of RNA Pol I. This structure could, however, be detected in unstained views of the enzyme obtained from frozen hydrated 2D crystals, indicating that this novel feature is not induced by the staining process. Unexpectedly, negatively charged molybdenum compounds were found to accumulate within the DNA-binding groove, which is best explained by the highly positive electrostatic potential of this region of the molecule, thus, suggesting that the stain distribution reflects the overall surface charge of the molecule.     

Visualization by cryo-electron microscopy of genomic RNA that binds to the protein capsid inside bacteriophage MS2

The icosahedrally symmetrized structure of bacteriophage MS2 as determined by cryo-electron microscopy (EM) reveals the presence of genomic RNA that attaches to coat-protein dimers. Earlier X-ray diffraction studies revealed similar interactions between the unique operator hairpin of the MS2 genomic RNA and the coat-protein dimer. This observation leads us to conclude that not only the operator, but also many other RNA sequences in the genome of MS2, are able to bind to the coat-protein dimer. A substantial number of potential coat-protein-dimer binding sites are present in the genome of MS2 that can account for the observed RNA densities in the EM map. Moreover, it appears that these stem-loop structures are able to bind in a similar fashion to the coat protein dimer as the wild-type operator hairpin. The EM map also shows additional density between the potential operator-binding sites, linking the RNA stem-loops together to form an icosahedral network around the 3 and 5-fold axes. This RNA network is bound to the inside of the MS2 capsid and probably influences both capsid stability and formation, supporting the idea that capsid formation and RNA packaging are intimately linked to each other.     

The structural bases of the processive degradation of iota-carrageenan, a main cell wall polysaccharide of red algae

iota-Carrageenans are sulfated 1,3-alpha-1,4-beta-galactans from the cell walls of red algae, which auto-associate into crystalline fibers made of aggregates of double-stranded helices. iota-Carrageenases, which constitute family 82 of glycoside hydrolases, fold into a right-handed beta-helix. Here, the structure of Alteromonas fortis iota-carrageenase bound to iota-carrageenan fragments was solved at 2.0A resolution (PDB 1KTW). The enzyme holds a iota-carrageenan tetrasaccharide (subsites +1 to +4) and a disaccharide (subsites -3, -4), thus providing the first direct determination of a 3D structure of iota-carrageenan. Electrostatic interactions between basic protein residues and the sulfate substituents of the polysaccharide chain dominate iota-carrageenan recognition. Glu245 and Asp247 are the proton donor and the base catalyst, respectively. C-terminal domain A, which was highly flexible in the native enzyme structure, adopts a alpha/beta-fold, also found in DNA/RNA-binding domains. In the substrate-enzyme complex, this polyanion-binding module shifts toward the beta-helix groove, forming a tunnel. Thus, from an open conformation which allows for the initial endo-attack of iota-carrageenan chains, the enzyme switches to a closed-tunnel form, consistent with its highly processive character, as seen from the electron-microscopy analysis of the degradation of iota-carrageenan fibers.     

Real-time single cell analysis of Smac/DIABLO release during apoptosis

We examined the temporal and causal relationship between Smac/DIABLO release, cytochrome c (cyt-c) release, and caspase activation at the single cell level during apoptosis. Cells treated with the broad-spectrum caspase inhibitor z-VAD-fmk, caspase-3 (Casp-3)-deficient MCF-7 cells, as well as Bax-deficient DU-145 cells released Smac/DIABLO and cyt-c in response to proapoptotic agents. Real-time confocal imaging of MCF-7 cells stably expressing Smac/DIABLO-yellow fluorescent protein (YFP) revealed that the average duration of Smac/DIABLO-YFP release was greater than that of cyt-c-green fluorescent protein (GFP). However, there was no significant difference in the time to the onset of release, and both cyt-c-GFP and Smac/DIABLO-YFP release coincided with mitochondrial membrane potential depolarization. We also observed no significant differences in the Smac/DIABLO-YFP release kinetics when z-VAD-fmk-sensitive caspases were inhibited or Casp-3 was reintroduced. Simultaneous measurement of DEVDase activation and Smac/DIABLO-YFP release demonstrated that DEVDase activation occurred within 10 min of release, even in the absence of Casp-3.     

A carboxyl-terminal interaction of lamin B1 is dependent on the CAAX endoprotease Rce1 and carboxymethylation

The mammalian nuclear lamina protein lamin B1 is posttranslationally modified by farnesylation, endoproteolysis, and carboxymethylation at a carboxyl-terminal CAAX motif. In this work, we demonstrate that the CAAX endoprotease Rce1 is required for lamin B1 endoproteolysis, demonstrate an independent pool of proteolyzed but nonmethylated lamin B1, as well as fully processed lamin B1, in interphase nuclei, and show a role for methylation in the organization of lamin B1 into domains of the nuclear lamina. Deficiency in the endoproteolysis or methylation of lamin B1 results in loss of integrity and deformity of the nuclear lamina. These data show that the organization of the nuclear envelope and lamina is dependent on a mechanism involving the methylation of lamin B1, and they identify a potential mechanism of laminopathy involving a B-type lamin.     

In vitro measurement of nuclear permeability changes in apoptosis

In the eukaryotic cell, exchange of biomolecules between nucleus and cytoplasm is a highly regulated process which responds sensitively to changes of the environment. One well-known cellular response to environmental challenges is cell death by apoptosis. In fact, apoptosis has been shown to affect the nucleocytoplasmic transport machinery, in particular the nuclear pore, by modulating its size exclusion limit for passive diffusion. The underlying molecular factors are still unknown, mainly because of the lack of a suitable system to detect and quantitate the apoptotic effects on the nuclear pore. Here we present an assay that was designed to measure alterations of the permeability of the nuclear envelope under apoptotic conditions. The assay is based on the well-established technique of selective permeabilization of the plasma membrane with digitonin and allows assessment of permeability changes in nonfixed samples. It comprises a computer program, called Nuclear Permeability Assay, for the quantitation of the nuclear fluorescence signal, which may be generally employed for the evaluation of in vitro transport systems using semipermeabilized cells, such as assays for nuclear import and export.     

Hydration, structure, and molecular interactions in the headgroup region of dioleoylphosphatidylcholine bilayers: an electron spin resonance study

The relationship between bilayer hydration and the dynamic structure of headgroups and interbilayer water in multilamellar vesicles is investigated by electron spin resonance methods. Temperature variations of the order parameter of a headgroup spin label DPP-Tempo in DOPC in excess water and partially dehydrated (10 wt % water) show a cusp-like pattern around the main phase transition, Tc. This pattern is similar to those of temperature variations of the quadrupolar splitting of interbilayer D2O in PC and PE bilayers previously measured by 2H NMR, indicating that the ordering of the headgroup and the interbilayer water are correlated. The cusp-like pattern of these and other physical properties around Tc are suggestive of quasicritical fluctuations. Also, an increase (a decrease) in ordering of DPP-Tempo is correlated with water moving out of (into) interbilayer region into (from) the bulk water phase near the freezing point, Tf. Addition of cholesterol lowers Tf, which remains the point of increasing headgroup ordering. Using the small water-soluble spin probe 4-PT, it is shown that the ordering of interbilayer water increases with bilayer dehydration. It is suggested that increased ordering in the interbilayer region, implying a lowering of entropy, will itself lead to further dehydration of the interbilayer region until its lowered pressure resists further flow, i.e., an osmotic phenomenon.     

Atomic force microscopy of pea starch granules: granule architecture of wild-type parent, r and rb single mutants, and the rrb double mutant

AFM studies have been made of the internal structure of pea starch granules. The data obtained provides support for the blocklet model of starch granule structure (Carbohydr. Polym. 32 (1997) 177-191). The granules consist of hard blocklets dispersed in a softer matrix material. High-resolution images have yielded new insights into the detailed structure of growth rings within the granules. The blocklet structure is continuous throughout the granule and the growth rings originate from localised defects in blocklet production distributed around the surface of spheroidal shells within the granules. A mutation at the rb locus did not lead to significant changes in granule architecture. However, a mutation at the r locus led to loss of growth rings and changed blocklet structure. For this mutant the blocklets were distributed within a harder matrix material. This novel composite arrangement was used to explain why the granules had internal fissures and also changes in gelatinisation behaviour. It is suggested that the matrix material is the amylose component of the granule and that both amylose and amylopectin are present within the r mutant starch granules in a partially-crystalline form. Intermediate changes in granule architecture have been observed for the double mutant rrb.