Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10^?4 S cm^?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm^?2 at 30 °C. The LiFePO₄/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature.     

An Air‐Stable and Dendrite‐Free Li Anode for Highly Stable All‐Solid‐State Sulfide‐Based Li Batteries

Li metal is a promising anode material for all‐solid‐state batteries, owing to its high specific capacity and low electrochemical potential. However, direct contact of Li metal with most solid‐state electrolytes induces severe side reactions that can lead to dendrite formation and short circuits. Moreover, Li metal is unstable when exposed to air, leading to stringent processing requirements. Herein, it is reported that the Li₃PS₄/Li interface in all‐solid‐state batteries can be stabilized by an air‐stable Li_xSiS_y protection layer that is formed in situ on the surface of Li metal through a solution‐based method. Highly stable Li cycling for over 2000 h in symmetrical cells and a lifetime of over 100 cycles can be achieved for an all‐solid‐state LiCoO₂/Li₃PS₄/Li cell. Synchrotron‐based high energy X‐ray photoelectron spectroscopy in‐depth analysis demonstrates the distribution of different components within the protection layer. The in situ formation of an electronically insulating Li_xSiS_y protection layer with highly ionic conductivity provides an effective way to prevent Li dendrite formation in high‐energy all‐solid‐state Li metal batteries.     

Cooling Induced Surface Reconstruction during Synthesis of High‐Ni Layered Oxides

Transition metal layered oxides have been the dominant cathodes in lithium‐ion batteries, and among them, high‐Ni ones (LiNi_xMn_yCo_zO₂; x ≥ 0.7) with greatly boosted capacity and reduced cost are of particular interest for large‐scale applications. The high Ni loading, on the other hand, raises the critical issues of surface instability and poor rate performance. The rational design of synthesis leading to layered LiNi_0.7Mn_0.15Co_0.15O₂ with greatly enhanced rate capability is demonstrated, by implementing a quenching process alternative to the general slow cooling. In situ synchrotron X‐ray diffraction, coupled with surface analysis, is applied to studies of the synthesis process, revealing cooling‐induced surface reconstruction involving Li₂CO₃ accumulation, formation of a Li‐deficient layer and Ni reduction at the particle surface. The reconstruction process occurs predominantly at high temperatures (above 350 °C) and is highly cooling‐rate dependent, implying that surface reconstruction can be suppressed through synthetic control, i.e., quenching to improve the surface stability and rate performance of the synthesized materials. These findings may provide guidance to rational synthesis of high‐Ni cathode materials.     

Underestimated ecosystem carbon turnover time and sequestration under the steady state assumption: A perspective from long‐term data assimilation

It is critical to accurately estimate carbon (C) turnover time as it dominates the uncertainty in ecosystem C sinks and their response to future climate change. In the absence of direct observations of ecosystem C losses, C turnover times are commonly estimated under the steady state assumption (SSA), which has been applied across a large range of temporal and spatial scales including many at which the validity of the assumption is likely to be violated. However, the errors associated with improperly applying SSA to estimate C turnover time and its covariance with climate as well as ecosystem C sequestrations have yet to be fully quantified. Here, we developed a novel model‐data fusion framework and systematically analyzed the SSA‐induced biases using time‐series data collected from 10 permanent forest plots in the eastern China monsoon region. The results showed that (a) the SSA significantly underestimated mean turnover times (MTTs) by 29%, thereby leading to a 4.83‐fold underestimation of the net ecosystem productivity (NEP) in these forest ecosystems, a major C sink globally; (b) the SSA‐induced bias in MTT and NEP correlates negatively with forest age, which provides a significant caveat for applying the SSA to young‐aged ecosystems; and (c) the sensitivity of MTT to temperature and precipitation was 22% and 42% lower, respectively, under the SSA. Thus, under the expected climate change, spatiotemporal changes in MTT are likely to be underestimated, thereby resulting in large errors in the variability of predicted global NEP. With the development of observation technology and the accumulation of spatiotemporal data, we suggest estimating MTTs at the disequilibrium state via long‐term data assimilation, thereby effectively reducing the uncertainty in ecosystem C sequestration estimations and providing a better understanding of regional or global C cycle dynamics and C‐climate feedback.     

Modeling optimal responses and fitness consequences in a changing Arctic

Animals must balance a series of costs and benefits while trying to maximize their fitness. For example, an individual may need to choose how much energy to allocate to reproduction versus growth, or how much time to spend on vigilance versus foraging. Their decisions depend on complex interactions between environmental conditions, behavioral plasticity, reproductive biology, and energetic demands. As animals respond to novel environmental conditions caused by climate change, the optimal decisions may shift. Stochastic dynamic programming provides a flexible modeling framework with which to explore these trade‐offs, but this method has not yet been used to study possible changes in optimal trade‐offs caused by climate change. We created a stochastic dynamic programming model capturing trade‐off decisions required by an individual adult female polar bear (Ursus maritimus) as well as the fitness consequences of her decisions. We predicted optimal foraging decisions throughout her lifetime as well as the energetic thresholds below which it is optimal for her to abandon a reproductive attempt. To explore the effects of climate change, we shortened the spring feeding period by up to 3 weeks, which led to predictions of riskier foraging behavior and higher reproductive thresholds. The resulting changes in fitness may be interpreted as a best‐case scenario, where bears adapt instantaneously and optimally to new environmental conditions. If the spring feeding period was reduced by 1 week, her expected fitness declined by 15%, and if reduced by 3 weeks, expected fitness declined by 68%. This demonstrates an effective way to explore a species' optimal response to a changing landscape of costs and benefits and highlights the fact that small annual effects can result in large cumulative changes in expected lifetime fitness.     

Thermally induced cyclization of L‐isoleucyl‐L‐alanine in solid state: Effect of dipeptide structure on reaction temperature and self‐assembly

Thermal treatment of short‐chain oligopeptides is able to initiate the process of their self‐assembly with the formation of organic nanostructures with unique properties. On the other hand, heating can lead to a chemical reaction with the formation of new substances with specific properties and ability to form structures with different morphology. Therefore, in order to have a desired process, researcher needs to find its temperature range. In the present work, cyclization of _L‐isoleucyl‐_L‐alanine dipeptide in the solid state upon heating was studied. Kinetic parameters of this reaction were estimated within the approaches of the nonisothermal kinetics. The correlation between side chain structure of dipeptides and temperature of their cyclization in the solid state was found for the first time. This correlation may be used to predict the temperature, at which dipeptide self‐assembly changes to chemical reaction. The differences in self‐assembly of linear and cyclic dipeptides were demonstrated using atomic force microscopy. The effect of dipeptide concentration in a source solution and an organic solvent used on self‐assembly of dipeptides was shown. The new information obtained on the thermal properties and self‐assembly of linear and cyclic forms of _L‐isoleucyl‐_L‐alanine may be useful for the design of new nanomaterials based on oligopeptides, as well as for the synthesis of cyclic oligopeptides.     

未折叠蛋白质的普遍初始热力学亚稳态

探索和理解蛋白质折叠问题一直是分子生物学、结构生物学和生物物理学的终极挑战.未折叠的蛋白质应该存在一种普遍初始热力学亚稳态,否则无法解释蛋白质是如何在剧烈的热振动干扰下完成快速精确折叠的.本文通过分析水溶液环境和蛋白质折叠的相关性,揭示了一种由水分子屏蔽效应引起的未折叠蛋白质的普遍初始热力学亚稳态,该亚稳态的存在是水溶液环境中水分子的物理性质决定,并赋予未折叠蛋白质抵抗热扰动和避免错误折叠的能力.我们通过研究已发表的实验数据和建立分子模型,找到了该初始热力学亚稳态存在的相关证据,并推测了该亚稳态导致蛋白质精确折叠的相关物理学机制.     

人参皂苷Rg2对慢性坐骨神经损伤大鼠痛觉敏化和抑郁状态的影响*

目的:观察人参皂苷Rg₂对慢性坐骨神经损伤大鼠痛觉敏化、抑郁状态的影响。方法: 将50只 SD 大鼠随机分为 5组(n=10): 空白对照组(Normal+生理盐水腹腔注射)、假手术组(手术但不结扎+生理盐水腹腔注射) 、坐骨神经慢性压迫损伤(CCI)组(CCI +生理盐水腹腔注射) 、人参皂苷Rg₂低剂量组(CCI+ Rg₂ 5 mg/kg腹腔注射)、人参皂苷Rg₂高剂量组(CCI+ Rg₂ 10 mg/kg 腹腔注射)。CCI模型建立后,药物通过注射器进行腹腔内注射 5 ml/kg,每天1次,连续14 d。分别在术前1 d和术后 1、3、5、7、10、14 d测定大鼠的机械性缩足反射阈值(MWT)和热缩足潜伏期(TWL);术前1 d和术后第14日时检测明暗箱实验和强迫游泳试验。 结果:与假手术组比较,CCI组术后14 d机械痛阈值和热痛潜伏期明显缩短(P＜0.01),明箱内停留时间明显缩短(P＜0.01),穿梭次数明显减少(P＜0.01),游泳潜伏期明显延长(P＜0.01)。与CCI组比较,人参皂苷Rg₂组术后14 d机械痛阈和热痛潜伏期明显增加(P＜0.01),大鼠在明箱内时间明显延长(P＜0.01),穿梭次数明显增多(P＜0.01),且游泳潜伏期明显缩短(P＜0.01)。结论:人参皂苷Rg₂能抑制 CCI 大鼠的机械痛敏和热痛敏,同时改善其抑郁状态。     

Changes in ecosystem services and an analysis of driving factors for China's Natural Forest Conservation Program

China's Natural Forest Conservation Program (NFCP) is aimed at improving the fragile and unstable ecological environment and has become one of the largest ecological restoration programs in the world because of its enormous investment and effects. It is important to work out and strengthen new measures to overcome difficulties to promote more ecosystem services and human well‐being in the NFCP. This study focused on how to evaluate the ecosystem services change brought about by implementing the NFCP. Taking the key state‐owned forest areas in the Northeast and Inner Mongolia as the study area, we provide a basic overview of development and construct an evaluation index system and a distributed calculation method for the NFCP to analyze the implications of the NFCP on ecosystem services combined with multi‐source data coupling. An evaluation index system for NFCP ecosystem services was constructed. The system includes five ecological service functions and 12 evaluation indices. The trade‐off and/or synergistic analysis of ecosystem services were carried out. The regional characteristics and changes in the NFCP ecosystem services were emphasized. Although it has not been implemented for a long time, the NFCP has had a great impact on ecosystem services because it reduces soil and water losses, increases soil fertility, strengthens the forest carbon sink and helped the forest accumulate nutrients and purify the atmosphere. Socioeconomic factors affect the NFCP ecosystem services, such as the implementation area of NFCP, investment amount of NFCP, area ratio of nature reserves, and yield of tree stock volume. Policy drivers of the NFCP, changes in the economic structure and reductions in forest yield are the main factors affecting the change in NFCP ecosystem services. Although the NFCP has positively affected the society, the economy, and the ecological environment, it has also generated some problems, such as the improper management of forest resources, shortage of capital investment, staff transfer, etc. The social and economic problems will be transient with implementation of the NFCP, and the structural changes in forestry and agriculture may eventually benefit the forestry workers and other stakeholders.     

A conserved folding mechanism for PDZ domains

An important question in protein folding is whether the folding mechanism is sequence dependent and conserved for homologous proteins. In this work we compared the kinetic folding mechanism of five postsynaptic density protein-95, disc-large tumor suppressor protein, zonula occludens-1 (PDZ) domains, sharing similar topology but having different primary structures. Investigation of the different proteins under various experimental conditions revealed that the folding kinetics of each member of the PDZ family can be described by a model with two transition states separated by an intermediate. Moreover, the positions of the two transition states along the reaction coordinate (as given by their beta(T)-values) are fairly constant for the five PDZ domains.