Is the edTPA the Right Choice for Evaluating Teacher Readiness?

The purpose of this article is to describe and analyze the edTPA, a performance assessment created by the Stanford Center for Assessment, Learning, and Equity (SCALE) and administered by Pearson, Inc., to assess the professional readiness of student teachers. We challenge claims made in support of using this assessment, specifically within the context of arts teacher preparation programs, and we address areas of immediate critical concern to make alternative recommendations.     

Standardization in Biological Staining. The Influence of Dye Manufacturing

The purpose of biological staining is to obtain specimens of biological material that can be assessed in the microscope. These specimens are influenced by all processes from removal from the intact organism to mounting on the microscopic slide. To achieve comparable results with various techniques for biological staining, standardization of all procedures and reagents is mandatory. In this paper, I focus particularly on dyes and consider the possibilities for obtaining standardized dyes. In general practice, most biological staining takes place with available commercial dyes. These dyes may or may not have been subjected to quality assessment either internally by the producer or vendor or externally by independent investigators or organizations such as the Biological Stain Commission. Concerted attempts at standardization in Europe are discussed. The latest results of this work, the European standard EN 12376, is presented. This standard is concerned with information supplied by the manufacturer with in vitro diagnostic reagents for biological staining. The standard has been prepared by a Working Group on Staining in Biology under Technical Committee 140, In Vitro Medical Devices, of the European committee for standardization, CEN.     

Assessing the Environmental Impact of Water Consumption by Energy Crops Grown in Spain

The environmental impact of the water consumption of four typical crop rotations grown in Spain, including energy crops, was analyzed and compared against Spanish agricultural and natural reference situations. The life cycle assessment (LCA) methodology was used for the assessment of the potential environmental impact of blue water (withdrawal from water bodies) and green water (uptake of soil moisture) consumption. The latter has so far been disregarded in LCA. To account for green water, two approaches have been applied: the first accounts for the difference in green water demand of the crops and a reference situation. The second is a green water scarcity index, which measures the fraction of the soil‐water plant consumption to the available green water. Our results show that, if the aim is to minimize the environmental impacts of water consumption, the energy crop rotations assessed in this study were most suitable in basins in the northeast of Spain. In contrast, the energy crops grown in basins in the southeast of Spain were associated with the greatest environmental impacts. Further research into the integration of quantitative green water assessment in LCA is crucial in studies of systems with a high dependence on green water resources.     

Linking Material Flow Analysis with Environmental Impact Potential

Technology transition can have significant implications on the evolution of environmental impact potential of disposed electronics over time. Considering technology transition, we quantify the temporal behavior of ecological and human health impact potential from select heavy metals in electronic waste (e‐waste). The case study analyzes product substitution effects in two electronic cohorts from the U.S. market: (1) computers (laptops substituting for desktops) and (2) televisions (flat‐panel liquid crystal displays [LCDs] and plasma displays substituting for cathode‐ray tubes [CRTs]). Quantities of end‐of‐life (EoL) units to year 2030 are forecasted by the unique combination of dynamic material flow analysis, logistic trend analysis, and product lifespan calibration methods. Metal content from EoL units are assessed via a pathway and effect model using USETox? characterization factors to determine the toxicity potential attributed to heavy metal releases into different media (e.g., air, water, and soil) as an indicator of environmental burden. Results show high impact materials such as lead, nickel, and zinc cause changes in human health toxicity potential and copper causes changes in ecological toxicity potential. Effects of dematerialization, such as reduced metal content in laptops over desktops, provide some positive benefits in toxicity potential per product. However, from a market perspective, emerging e‐waste quantities created by increasing per capita penetration rates of electronics and increasing population will offset gains in environmental performance at the product level. The resulting analysis provides guidance on the timing expected for emerging EoL units and an indication of high impact potential materials requiring pollution prevention as product substitution occurs.     

Improving vigour assessment of pine (Pinus nigra Arnold) seedlings before their use in reforestation

ABSTRACT

We investigated whether changes in the root system of pine seedlings induced by stress (lifting of bare-root seedlings from the nursery bed irrespective of dormancy; prolonged storage of bare-root seedlings in a cold room) could provide a measure of plant vigour. Physiological parameters, such as growth potential and root electrolyte leakage, and morphological parameters, such as root length and number of root tips, were calculated. Computerised image analysis was used to measure root growth, overall and based on root-diameter class (0–0.5 mm, 0.5–1.0 mm and 1.0–1.5 mm). The efficiency of vigour assessment was evaluated by correlating the data for each parameter with percentage seedling survival. Root growth potential was more efficient than root electrolyte leakage, but both parameters were affected by seedling age. Total root length was a more efficient indicator of plant vigour than root tip number, particularly when referred to roots of the same diameter class. A comparative analysis of physiological and morphological parameters referred to the root systems improves their relative effciency.     

Bioaccumulation of Key Metals and Other Contaminants by Seaweeds from the Egyptian Mediterranean Sea Coast in Relation to Human Health Risk

This study examined the bioaccumulation of key metals and other contaminants (SO₄, F, Na, K, Ca, Mg, P, Si, Fe, Mn, Zn, Ni, Co, Cu, and Cd) by seaweeds from the Egyptian Mediterranean Sea coast and their risk to human health. Bioaccumulation factor calculations indicated that S, F, Na, K, Zn, Cu, and Cd had high seaweed uptake and this referred to the potential pollution of the coastal area. Multivariate analysis of the studied contaminants confirmed the bioaccumulation factor results as well as the physiological processes in seaweeds. Human health risk assessment of F, Mn, Zn, Ni, Cu, and Cd was conducted using hazard quotient (HQ) and incremental lifetime cancer risk (ILCR) analyses. The carcinogenic assessment of sediments and ingestion of seaweeds using ILCR calculations revealed that Mn, Ni, and Cd in sediments and F and Zn in seaweeds require remedial action in order to reduce their human health risks. Additionally, HQ calculations for the contaminants in seaweeds and reference to toxicological references values from different agencies revealed that F and Co present high human health risk effects. Consequently, the potential public health risks from dietary exposure to hazardous contaminants in seaweeds must be continually subjected to research, regulation, and debate.     

Objective and Perceived Risk Estimates of Travel Modes in the Norwegian Public

The aim of this study was to identify groups of travel mode users, based on objective risk estimates, and examine overall differences in demographic characteristics, perceived risk, worry, perceived control when using travel modes, trust in authorities, and safety motivation. The results were based on a self-completion questionnaire survey about risk perception and travel mode use in a representative sample of the Norwegian public (n = 1864). In addition, aggregate-level data on accidents in transport were used to establish the “objective risk” for various travel modes. The respondents were split into two clusters. The first cluster was characterized by a relatively greater objective risk for accidents related to public travel modes as well as related to being a pedestrian, while the second cluster was characterized by a higher risk level related to motorized private modes of transportation. There was a significant overall difference in the risk estimates among the members of the two clusters. There was also an overall difference in risk perception and other risk-related judgments due to which risk estimate-based cluster the respondents belonged. Associations between objective risk estimates, perceived risk, and worry are discussed in relation to cluster differences in objective risk.     

Ecological Risk Assessment of Organochlorine Pesticides in Surface Waters of Lake Taihu,China

The residues of organochlorine pesticides (OCPs) in surface waters from Meiliang Bay, Gonghu Bay, and Xukou Bay of Lake Taihu, China, were investigated, and their ecological risks were assessed using the risk quotient method and probabilistic risk assessment. Environmental concentrations of OCPs in surface water of these bays were relatively lower compared with other rivers or lakes in China. Calculation of risk quotient associated with taxonomic groups indicates moderate ecological risks from OCPs for crustaceans and insects in these bays, while the ecological risks were low for fish and negligible for phytoplankton. The ecological risk quotients associated with individual OCPs were lower than 0.01 in these bays, suggesting a negligible risk to aquatic organisms. Ecological risk from α-HCH was relatively lower compared with DDTs, endosulfans, and γ-HCH. The combined ecological risks were evaluated using probabilistic risk assessment for only eight OCPs owing to a lack of available toxicity data for β-HCH and δ-HCH. The percentage of species with the potential to be at risk from mixture of OCPs was lower than the criteria of 5% in each bay, indicating that the combined ecological risks were acceptable.     

Potential Distribution and Risk Assessment of an Invasive Plant Species: A Case Study of Hymenachne amplexicaulis in Australia

Given the limited resources available for weed management, a strategic approach is required to give the “best bang for your buck.” The current study incorporates: (1) a model ensemble approach to identify areas of uncertainty and commonality regarding a species invasive potential, (2) current distribution of the invaded species, and (3) connectivity of systems to identify target regions and focus efforts for more effective management. Uncertainty in the prediction of suitable habitat for H. amplexicaulis (study species) in Australia was addressed in an ensemble-forecasting approach to compare distributional scenarios from four models (CLIMATCH; CLIMEX; boosted regression trees [BRT]; maximum entropy [Maxent]). Models were built using subsets of occurrence and environmental data. Catchment risk was determined through incorporating habitat suitability, the current abundance and distribution of H. amplexicaulis, and catchment connectivity. Our results indicate geographic differences between predictions of different approaches. Despite these differences a number of catchments in northern, central, and southern Australia were identified as high risk of invasion or further spread by all models suggesting they should be given priority for the management of H. amplexicaulis. The study also highlighted the utility of ensemble approaches in indentifying areas of uncertainty and commonality regarding the species’ invasive potential.     

Forest ecosystem assessment,changes in biodiversity and climate change in a densely populated region (Flanders,Belgium)

Abstract

Throughout the world, forest covers one-third of the land's area. Present and historical human activities caused tremendous land use changes and triggered the onset of unseen climate changes. Yet, these socio-economically based environmental changes interfere with services that forests provide to mankind from global to local scales. Densely populated regions such as Flanders (Belgium), with over 430 people per km², have the dubious honour to serve as examples of extreme human induced forest changes. The issue of forest biodiversity is reviewed in the light of the Millennium Ecosystem Assessment scheme. Flanders is a poorly forested region (11% forest cover); supporting services are consequently low. Merely 16% of that area has known 230 years of continuous forest cover, representing forest with the highest current biodiversity. Also, the demands for regulating services are growing and the limits may have been reached. Provisioning services may increase again in future when demands for, for example bio-energy, increase. Cultural services, particularly the recreational function, have increased greatly. Human well-being in Flanders partly depends on the services provided by forest ecosystems. However, as demands on forests are huge, a shift to a sustainable use of forest resources will be essential to assure its beneficial role for present and future generations.