适用于磁压榨吻合的平移钳的设计

目的:提出了磁压榨吻合操作中可用于磁体夹持固定的平移钳的结构设计方案。方法:分析本团队多种原创性磁压榨吻合技术操作中存在的缺陷和不足,认为目前磁压榨吻合操作中依靠术者徒手控制或利用现有血管钳对磁体进行夹持和固定,是造成操作中诸多不便的主要原因。从力学角度分析了常规血管钳夹持磁体易导致磁体滑脱的原因,指出设计加工磁吻合专用钳是解决目前磁吻合操作不便的有效措施。在此基础上提出了利用平移钳来固定磁体的结构设计方案,并从力学角度进行了受力分析,设计出了用于磁压榨吻合操作中磁体夹持固定的平移钳。结果:平移钳的结构设计能够稳定夹持磁体,避免磁体滑脱;同时,借助齿轮传动结构控制钳头的平行移动能够更好地控制磁体的精准对吸和分离,可进一步简化操作,避免副损伤,节省手术操作时间。结论:平移钳能满足多种形状及大小的磁体的夹持和固定,可有效控制磁体的吸合与分离,极大地方便操作。该平移钳加工简单,使用方便,有助于推动磁压榨吻合技术在临床广泛开展。     

电针结合红外线照射对反复着床失败患者子宫内膜容受性、胚胎移植及妊娠情况的影响

目的:观察电针结合红外线照射对反复着床失败(RIF)患者子宫内膜容受性、胚胎移植及妊娠情况的影响。方法:选取102例于2015年5月-2018年5月在我院行复苏胚胎移植的RIF患者,按照随机数字表法将患者分为电针结合红外线照射治疗组(A组,38例)、安慰针刺组(B组,34例)及空白对照组(C组,30例)。比较三组治疗前后血清雌二醇、孕酮水平,于治疗前后检测子宫内膜容受性超声学指标,包括子宫内膜厚度、内膜容积、血管血流指数(VFI)、内膜血流指数(FI)、阻力指数(RI),比较三组胚胎移植及妊娠情况。结果:三组治疗前后血清雌二醇、孕酮水平比较无统计学差异(P0.05)。治疗后A组子宫内膜厚度、内膜容积大于治疗前及B组、C组,VFI、FI高于治疗前及B组、C组,RI低于治疗前及B组、C组(P0.05)。三组移植胚胎数、生化妊娠率、临床妊娠率比较无统计学差异(P0.05),A组胚胎着床率高于B组、C组(P0.05)。结论:电针结合红外线照射治疗RIF患者可以改善子宫内膜容受性,提高胚胎着床率。     

磁共振成像应用于检测胎盘植入介入治疗

为了探讨磁共振成像(magnetic resonance imaging, MRI)在胎盘植入介入治疗中的诊断作用和为临床治疗提供依据,本研究选取30例于2012年6月至2015年12月间在我院进行介入治疗的胎盘植入患者作为研究对象,根据病理诊断标准,分析患者胎盘植入介入治疗前后的MRI检查结果。结果显示,粘连性胎盘的敏感性和特异性分别为77.5%和90.2%,植入性胎盘的敏感性和特异性分别为75.5%和87.7%,穿透性胎盘的敏感性和特异性分别为85%和100%。最好的预测胎盘植入的MRI特征是在T2W磁共振成像(T2W-MRI)序列上存在暗色的胎盘内条带。介入治疗1年后复查时,发现患者子宫恢复为正常大小,宫腔内的胎盘组织基本消失,宫壁与植入胎盘融合、宫腔内膜线和子宫结合带的信号完整。综上结果,说明MRI可作为检测胎盘植入可靠性和可重复性的工具,并且能够显示胎盘植入部位及子宫肌层受侵程度,可用于评价胎盘植入介入治疗的疗效。     

颈动脉斑块LRNC特征可诊断2型糖尿病患者急性脑梗死的风险

2型糖尿病可能加重颈动脉斑块的易损性并增加缺血性中风的风险,关于2型糖尿病患者伴有颈动脉斑块特征的急性中风亚型鲜有研究报道。本研究旨在探讨2型糖尿病患者颈动脉斑块特征与MRI确定的急性脑梗死病变特征之间的关系。本研究以颈内动脉区急性脑血管病患者为研究对象,所有患者分为2型糖尿病组和非2型糖尿病组,分别行颈动脉和脑部MRI扫描,测定同侧颈动脉斑块的形态和特征,以及颅内和颅外颈动脉狭窄。基于中风亚型和急性脑梗塞病变模式对患者进行评估。研究结果表明,与非2型糖尿病患者相比,2型糖尿病患者颈动脉型IV-VI病变的患病率更高,斑块负荷更大,以及富脂质坏死核(LRNC)更大。在有症状的颈动脉LRNC患者中,与非2型糖尿病组相比,2型糖尿病组颈内动脉区出现较多的伴有大穿孔动脉梗塞形态和较大的急性脑梗塞。LRNC%>23.5%的颈动脉斑块是2型糖尿病患者存在颈动脉狭窄的急性脑梗塞病变的独立危险因素。颈动脉斑块特征的量化,尤其是MRI诊断的富脂质坏死核对中风风险具有潜在应用价值。     

融合蛋白NusA-hRI的高效异源表达、纯化及活性分析

人核糖核酸酶抑制因子 (human ribonuclease inhibitor, hRI) 是一种能够调节核糖核酸酶活性的酸性包浆蛋白。通过构建含SUMO、IF2、GST、NusA 、MsyB、Trx和 MBP融合标签的重组表达载体,以大肠杆菌BL21(DE3)作为宿主菌进行自诱导(auto-induction,AI)表达,从而使 hRI 的表达量得以提升。利用MagNi磁珠纯化及电泳分析hRI的表达状况,通过RNase/Sepharose亲和层析获得纯度较高的蛋白。纯化后获得的融合蛋白浓度为2 960.513mg/L,与其它公司的hRI活性进行比较,检测其酶活性约为50U/μl,并使其成功用于RNA的保护,为NusA-hRI的应用提供理论依据。     

Synthesis and elaboration of N-methylpyrrolidone as an acetamide fragment substitute in bromodomain inhibition

N-Methylpyrrolidone is a solvent molecule which has been shown to compete with acetyl-lysine-containing peptides for binding to bromodomains. From crystallographic studies, it has also been shown to closely mimic the acetamide binding motif in several bromodomains, but has not yet been directly pursued as a fragment in bromodomain inhibition. In this paper, we report the elaboration of N-methylpyrrolidone as a potential lead in fragment-based drug design. Firstly, N-methylpyrrolidone was functionalised to provide points for chemical elaboration. Then, the moiety was incorporated into analogues of the reported bromodomain inhibitor, Olinone. X-ray crystallography revealed that the modified analogues showed comparable binding affinity and structural mimicry to Olinone in the bromodomain binding site.     

Children with cerebral palsy have larger Achilles tendon moment arms than typically developing children

The effectiveness of the plantarflexor muscle group to generate desired plantarflexion moments is modulated by the geometry of the Achilles tendon moment arm (ATMA). Children with cerebral palsy (CP) frequently have reduced plantarflexion function, which is commonly attributed to impaired muscle structure and function, however little attention has been paid to the potential contribution of ATMA geometry. The use of musculoskeletal modelling for the simulation of gait and understanding of gait mechanics, rely on accuracy of ATMA estimates. This study aimed to compare 3D in-vivo estimates of ATMA of adults, children with CP and typically developing (TD) children, as well as compare 3D in-vivo estimates to linearly scaled musculoskeletal model estimates. MRI scans for eight children with CP, 11 TD children and nine healthy adults were used to estimate in-vivo 3D ATMA using a validated method. A lower limb musculoskeletal model was linearly scaled to individual tibia length to provide a scaled ATMA estimate. Normalised in-vivo 3D ATMA for children with CP was 17.2% ± 2.0 tibia length, which was significantly larger than for TD children (15.2% ± 1.2, p = 0.013) and adults (12.5% ± 0.8, p < 0.001). Scaled ATMA estimates from musculoskeletal models significantly underestimated in-vivo estimates for all groups, by up to 34.7%. The results of this study show children with CP have larger normalised 3D ATMA compared to their TD counterparts, which may have implications in understanding reduced plantarflexor function and the efficacy of surgical interventions whose aim is to modify the musculoskeletal geometry of this muscle group.     

Magnetic resonance imaging based modeling of microvascular perfusion in patients with peripheral artery disease

Peripheral artery disease (PAD) is associated with an increased risk of adverse cardiovascular events, impaired lower extremity blood flow and microvascular perfusion abnormalities in the calf muscles which can be determined with contrast-enhanced magnetic resonance imaging (CE-MRI). We developed a computational model of the microvascular perfusion in the calf muscles. We included 20 patients (10 PAD, 10 controls) and utilized the geometry, mean signal intensity and arterial input functions from CE-MRI calf muscle perfusion scans. The model included the microvascular pressure (p_v), outflow filtration coefficient (OFC), transfer rate constant (k^t), porosity (φ), and the interstitial permeability (K_tissue). Parameters were fitted and the simulations were compared across PAD patients and controls. Intra-observer reproducibility of the simulated mean signal intensities was excellent (intraclass correlation coefficients >0.995). k^t and K_tissue were higher in PAD patients compared with controls (4.72 interquartile range (IQR) 3.33, 5.56 vs. 2.47 IQR 2.10, 2.85; p = 0.003; and 3.68 IQR 3.18, 4.41 vs. 1.81 IQR 1.81, 1.81; p < 0.001). Conversely, porosity (φ) was lower in PAD patients compared with controls (0.52 IQR 0.49, 0.54 vs. 0.61 IQR 0.58, 0.64; p = 0.016). Porosity (φ) was correlated with the ankle brachial index (r = 0.64, p = 0.011). The proposed computational microvascular model is robust and reproducible, and essential model parameters differ significantly between PAD patients and controls.     

经颅磁刺激参数与结构要件的影响分析

为了进一步探索经颅磁刺激工作机理并改进或研制出新的经颅磁刺激激励源.本文从经颅磁刺激的原理推导出了磁场、感应电流及激励源原理电路电流的表达式,利用大脑-线圈和大脑-线圈-铁芯两种经颅磁刺激模型分析影响因素与头模型各组织的磁场和感应电流分布.对比分析表明电流的性质,线圈半径,线圈激励特性与铁芯对感应电流分布与电磁场分布有着本质的影响.对经颅磁刺激参数及结构要件的研究与分析可用于指导刺激线圈参数及激励源电路参数的设置,以及探索新的激励源制作.     

口腔内金属材料对磁共振检查的影响

检测口腔内常用金属材料在磁共振检查时是否有伪影和伪影的严重程度。对２１种口腔内常用金属材料做了磁共振成像测试,磁共振仪磁场强度为１．５Ｔ,所用序列是梯度回波。铸金片、银汞合金、银尖等９种材料无伪影;钛合金和金属烤瓷成品有轻度伪影;牙用固位钉、椿钉等１０种材料有严重伪影。部分口腔内金属材料会引起严重伪影,影响图象质量,所以在做口腔颌面部和服部磁共振成像时,须引起重视。