Two gerbils of the Negev: A long-term investigation of optimal habitat selection and its consequences

Optimal foraging theory has entered a new phase. It is not so much tested as used. It helps behavioural ecologists discover the nature of the information in an animals brain. It helps population ecologists reveal coefficients of interaction and their patterns of density-dependent variation. And it helps community ecologists examine niche relationships. In our studies on two species of Negev desert gerbil, we have taken advantage of the second and third of these functions. Both these gerbils prefer semi-stabilized dune habitat, and both altered their selective use of this habitat and stabilized sand according to experimental changes we made in their populations. Their changes in selectivity agree with a type of optimal foraging theory called isoleg theory. Isoleg theories provide examples of dipswitch theories – bundles of articulated qualitative predictions – that are easier to falsify than single qualitative predictions. By linking behaviour to population dynamics through isoleg theory, we were able to use the behaviour of the gerbils to reveal the shapes of their competitive isoclines. These have the peculiar non-linear shapes predicted by optimal foraging theory. Finally, when owl predation threatens, the behaviour of Gerbillus allenbyi reveals the shape of their victim isocline. As has long been predicted by predation theory and laboratory experiments, it is unimodal.     

Transgenic Melon and Squash Expressing Coat Protein Genes of Aphid-borne Viruses do not Assist the Spread of an Aphid Non- transmissible Strain of Cucumber Mosaic Virus in the Field

Transgenic melon and squash containing the coat protein (CP) gene of the aphid transmissible strain WL of cucumber mosaic cucumovirus (CMV) were grown under field conditions to determine if they would assist the spread of the aphid non-transmissible strain C of CMV, possibly through heterologous encapsidation and recombination. Transgenic melon were susceptible to CMV strain C whereas transgenic squash were resistant although the latter occasionally developed chlorotic blotches on lower leaves. Transgenic squash line ZW-20, one of the parents of commercialized cultivar Freedom II, which expresses the CP genes of the aphid transmissible strains FL of zucchini yellow mosaic (ZYMV) and watermelon mosaic virus 2 (WMV 2) potyviruses was also tested. Line ZW-20 is resistant to ZYMV and WMV 2 but is susceptible to CMV. Field experiments conducted over two consecutive years showed that aphid-vectored spread of CMV strain C did not occur from any of the CMV strain C-challenge inoculated transgenic plants to any of the uninoculated CMV-susceptible non- transgenic plants. Although CMV was detected in 3% (22/764) of the uninoculated plants, several assays including ELISA, RT- PCR-RFLP, identification of CP amino acid at position 168, and aphid transmission tests demonstrated that these CMV isolates were distinct from strain C. Instead, they were non-targeted CMV isolates that came from outside the field plots. This is the first report on field experiments designed to determine the potential of transgenic plants expressing CP genes for triggering changes in virus-vector specificity. Our results indicate that transgenic plants expressing CP genes of aphid transmissible strains of CMV, ZYMV, and WMV 2 are unlikely to mediate the spread of aphid non-transmissible strains of CMV. This finding is of practical relevance because transgenic crops expressing the three CP genes are targeted for commercial release, and because CMV is economically important, has a wide host range, and is widespread worldwide.     

Isolation and spectral characterization of thermally generated multi-Z-isomers of lycopene and the theoretically preferred pathway to di-Z-isomers

Lycopene has a large number of geometric isomers caused by E/Z isomerization at arbitrary sites within the 11 conjugated double bonds, offering varying characteristics related to features such as antioxidant capacity and bioavailability. However, the geometric structures of only a few lycopene Z-isomers have been thoroughly identified from natural sources. In this study, seven multi-Z-isomers of lycopene, (9Z,13′Z)-, (5Z,13Z,9′Z)-, (9Z,9′Z)-, (5Z,13′Z)-, (5Z,9′Z)-, (5Z,9Z,5′Z)-, and (5Z,9Z)-lycopene, were obtained from tomato samples by thermal isomerization, and then isolated by elaborate chromatography, and fully assigned using proton nuclear magnetic resonance. Moreover, the theoretically preferred pathway from (all-E)-lycopene to di-Z-isomers was examined with a computational approach using a Gaussian program. Fine-tuning of the HPLC separation conditions led to the discovery of novel multi-Z-isomers, and whose formation was supported by advanced theoretical calculations.     

Molecular genetic characterization of plant somatic hybrids

An efficient and easy method for genetic characterization of plant somatic hybrids is proposed. In a first qualitative approach, four somatic hybrids and their parental species (Nicotiana tabacum andN. plumbaginifolia) were characterized by DNA fingerprinting and Random Amplification of Polymorphic DNA (RAPD). After this, a quantitative estimation of the degree of parental contribution to the hybrids was carried out by means of a slot-blot analysis. Both qualitative methods, showed one hybrid identical toN. tabacum, two almost identical toN. plumbaginifolia, and a fourth similar to this parental species, but with someN. tabacum admixture. The quantitative method, for the same hybrids, gave 83%, 7%, 7%, and 37%N. tabacum DNA contribution, respectively.     

Determination of inflection points of CyberKnife dose profiles within acceptability criteria of deviations in measurements

AimThe aim of this study was to determine the Inflection Points (IPs) of flattening filter free (FFF) CyberKnife dose profiles for cone-based streotactic radiotherapy. In addition, dosimetric field sizes were determined.BackgroundThe increased need for treatment in the early stages of cancer necessitated the treatment of smaller tumors. However, efforts in that direction required the modeling accuracy of the beam. Removal of the flattening filter (FF) from the path of x-ray beam has provided the solution to those efforts, but required a different normalization approach for the beam to ensure the delivery of the dose accurately. As a solution, researchers proposed a normalization factor based on IPs.Materials and methodsMeasurements using microDiamond (PTW 60019), Diode SRS (PTW 60018) and Monte Carlo (MC) calculations of dose profiles were completed at SAD 80 cm and 5 cm depth for 15–60 mm cones. Performance analysis of detectors with respect to MC calculation was carried out. Gamma evaluation method was used to determine achievable acceptability criteria for FFF CyberKnife beams.ResultsAcceptability within (3%–0.5 mm) was found to be anachievable criterion for all dose profile measurements of the cone beams used in this study. To determine the IP, the first and second derivatives of the dose profile were determined via the cubic spline interpolation technique.ConclusionDerivatives of the interpolated profiles showed that locations of IPs and 50% isodose points coincide.     

A neutral model of edge effects

In this paper a spatially implicit neutral model for explaining the edge effects between habitats is proposed. To analyze this model we use two different approaches: a discrete approach that is based on the Master equation for a one step jump process and a continuous approach based on the approximation of the discrete jump process with the Kolmogorov-Fokker-Planck forward and backward equations. The discrete and continuous approaches are applied to analyze the species abundance distributions and the time to species extinction. Moreover, with the aid of the continuous approach a realistic classification of the behavior of species in local communities is developed. The species abundance dynamics at the edge between two distinct habitats is compared with those located in the homogeneous interior habitats using species abundance distributions and the first time to species extinction. We show that the structure of the links between local community and the metacommunity plays an important role on species persistence. Specifically, species at the edge between two distinct metacommunities have higher extinction rate than those in the interior habitats connected only to one metacommunity. Moreover, the same species might be persistent in the homogeneous interior habitat, but its probability of extinction from the edge local community could be very high.     

An optimized calibration method for surface measurements with MOSFETs in shaped-beam radiosurgery

Nowadays MOSFET dosimeters are widely used for dose verification in radiotherapy procedures. Although their sensitive area satisfies size requirements for small field dosimetry, their use in radiosurgery has rarely been reported. The aim of this study is to propose and optimize a calibration method to perform surface measurements in 6 MV shaped-beam radiosurgery for field sizes down to 18 × 18 mm². The effect of different parameters such as recovery time between 2 readings, batch uniformity and build-up cap attenuation was studied. Batch uniformity was found to be within 2% and isocenter dose attenuation due to the build-up cap over the MOSFET was near 2% irrespective of field size. Two sets of sensitivity coefficients (SC) were determined for TN-502RD MOSFET dosimeters using experimental and calculated calibration; the latter being developed using an inverse square law model. Validation measurements were performed on a realistic head phantom in irregular fields. MOSFET dose values obtained by applying either measured or calculated SC were compared. For calibration, optimal results were obtained for an inter-measurement time lapse of 5 min. We also found that fitting the SC values with the inverse square law reduced the number of measurements required for calibration. The study demonstrated that combining inverse square law and Sterling–Worthley formula resulted in an underestimation of up to 4% of the dose measured by MOSFETs for complex beam geometries. With the inverse square law, it is possible to reduce the number of measurements required for calibration for multiple field–SSD combinations. Our results suggested that MOSFETs are suitable sensors for dosimetry when used at the surface in shaped-beam radiosurgery down to 18 × 18 mm².     

Induced electric field and current density patterns in bone fractures

We have used the low frequency solver of the computer program SEMCAD‐X to model the induced electric field and current density patterns in simple models of a fractured femur embedded off‐center in cylindrical muscle tissue; a 1 cm fracture gap is filled with callus. The model is exposed to a 1 kHz, 1 mT sinusoidal magnetic field. The frequency chosen is typical of the major Fourier components of many waveforms used to stimulate fracture healing using pulsed magnetic fields; the intensity is also a typical level. Models include fractures perpendicular to the bone and at an angle from the perpendicular, each exposed to a field applied parallel to the bone or parallel to either of the two axes perpendicular to it. We find that all directions of applied magnetic fields produce essentially parallel induced electric fields and current densities through the plane of the callus, but that a magnetic field applied parallel to the bone induces considerably higher fields and currents than the same strength field applied in either perpendicular direction. Because investigations of pulsed‐field devices, including modeling of induced fields and currents, peaked more than a decade ago, this is the first application to our knowledge of the current capabilities of computer modeling systems to biological systems at low frequencies. Bioelectromagnetics 33:585–593, 2012. © 2012 Wiley Periodicals, Inc.     

The control of cellulose microfibril deposition in the cell wall of higher plants

In maize (Zea mays L.) and pine (Pinus taeda L.) seedlings, cellulose microfibril impressions are present on freeze-fractured plasma membranes. It has been proposed that impressions of newly synthesized microfibrils are a record of the movement of terminal synthesizing complexes through the plasma membrane (Mueller and Brown, 1980, J. Cell Biol. 84, 315–326). The association of terminal complexes with the ends of microfibril impressions or with the ends of microfibrils torn through the membrane indicates the orientation of microfibril tips. Unidirectionally-oriented microfibril tips (all pointing in the same direction) are associated with the organized deposition of parallel arrays of microfibrils. Multidirectionally-oriented microfibril tips were observed in a cell in which microfibril deposition was unusually disorganized. Microfibril patterns around pit fields are asymmetric and resemble flow patterns. Unidirectionally-oriented tears are associated with these microfibrils. Although microfibril orientations are deflected around pit fields, the main axis of microfibril orientation is maintained across the surface of the cell. The hypothesis is proposed that the interaction of a flowing plasma membrane with microfibril synthesizing complexes in the plane of the membrane may result in unidirectional deposition and asymmetric microfibril impressions around pit fields.Some of this work has been published in preliminary form (Brown 1979)     

Determination of safety distance limits for a human near a cellular base station antenna,adopting the IEEE standard or ICNIRP guidelines

This paper investigates the minimum distance for a human body in the near field of a cellular telephone base station antenna for which there is compliance with the IEEE or ICNIRP threshold values for radio frequency electromagnetic energy absorption in the human body. First, local maximum specific absorption rates (SARs), measured and averaged over volumes equivalent to 1 and to 10 g tissue within the trunk region of a physical, liquid filled shell phantom facing and irradiated by a typical GSM 900 base station antenna, were compared to corresponding calculated SAR values. The calculation used a homogeneous Visible Human body model in front of a simulated base station antenna of the same type. Both real and simulated base station antennas operated at 935 MHz. Antenna-body distances were between 1 and 65 cm. The agreement between measurements and calculations was excellent. This gave confidence in the subsequent calculated SAR values for the heterogeneous Visible Human model, for which each tissue was assigned the currently accepted values for permittivity and conductivity at 935 MHz. Calculated SAR values within the trunk of the body were found to be about double those for the homogeneous case. When the IEEE standard and the ICNIRP guidelines are both to be complied with, the local SAR averaged over 1 g tissue was found to be the determining parameter. Emitted power values from the antenna that produced the maximum SAR value over 1 g specified in the IEEE standard at the base station are less than those needed to reach the ICNIRP threshold specified for the local SAR averaged over 10 g. For the GSM base station antenna investigated here operating at 935 MHz with 40 W emitted power, the model indicates that the human body should not be closer to the antenna than 18 cm for controlled environment exposure, or about 95 cm for uncontrolled environment exposure. These safe distance limits are for SARs averaged over 1 g tissue. The corresponding safety distance limits under the ICNIRP guidelines for SAR taken over 10 g tissue are 5 cm for occupational exposure and about 75 cm for general-public exposure.