Application of two SH-based methods for metallothionein determination in mussels and intercalibration of the spectrophotometric method: laboratory and field studies in the Mediterranean Sea

Metallothionein (MT) induction is widely used as a biomarker of exposure to metals in mussels. The aims of the present work were first to compare the suitability of spectrophotometry and differential pulse polarography (DPP) for MT detection in mussels exposed to 200 ppb cadmium for 9 days in a laboratory experiment and in mussels sampled in different seasons from expected pollution gradients along the Mediterranean Sea; second, to intercalibrate the widely used spectrophotometric method using mussels from Saronikos Gulf. In the intercalibration of the spectrophotometric method, similar results (p>0.05) were obtained by two different research teams indicating a good reproducibility of the technique. However, polarographic and spectrophotometric methods gave significantly (p<0.05) different results in laboratory and field studies. In the laboratory experiment, MT values detected with DPP were nine times higher than with spectrophotometry. The results obtained by the two methods were significantly correlated. Both methods could discriminate between control and exposed mussels. In field studies, MT values obtained by DPP were 34–38-fold higher than with spectrophotometry, and MT concentrations measured by both methods were not correlated. This discrepancy could be due to several factors, including the low levels of bioavailable metals in the studied areas and the possibility that the different methods can measure MT isoforms differentially. Further work is needed to decipher the functions of MT isoforms in mussels. This information is relevant for the application of MT as a biomarker in biomonitoring programmes.     

A need to provide explanations for observed biological effects of radiofrequency exposure

Abstract

Although there is scientific consensus that radiofrequency (RF) exposure at high intensity can cause thermal effects, including well-established adverse health effects, there is still considerable controversy on whether low-intensity RF exposure can cause biological effects, especially adverse health effects. The objective of this paper is to describe several reported “non-thermal” effects that were later shown to be due to a weak thermal effect or an experimental artifact by properly conducted and thorough follow-on scientific research. First, the multiple factors that can cause different RF energy absorption in biological tissues are reviewed and second, several examples of experimental artifacts in published papers are described to demonstrate the importance of paying attention to dosimetry and temperature control. For example, isolated nerve response studies show that when temperature of the RF-exposed tissues is controlled, effects disappeared. During RF exposure, conductive electrodes routinely used in physiological studies have been shown to cause field intensification at the tips or contacts of the electrodes with biological tissue; thus, the RF exposure at the site of measurement could be much higher than the incident field. In some in vitro studies, a lack of temperature uniformity in RF-exposed cell cultures and rate of heating explain changes originally reported to be due to low-level RF exposure. In other studies, detailed dosimetry studies have identified artifacts that explain the reasons why so-called “non-thermal” effects were mistakenly reported. Researchers should look for explanations for their own findings, and not expect others to figure out what was the reason for their observed effects.     

Study of the frequency parameters of EEG influenced by zone-dependent local ELF-MF exposure on the human head

It has been reported that human subjects exposed to electromagnetic fields exhibit changes in human EEG signals at the frequency of stimulation. The aim of the present study was to expose different parts of the brain to extremely low-frequency magnetic fields locally and investigate EEG power spectrum alters at the frequency of stimulation. EEG relative power spectrum were evaluated at 3, 5, 10, 17, and 45 Hz frequencies at T4, T3, F3, Cz, and F4 points, respectively, when these points were exposed to magnetic fields with similar frequencies and 100 μT intensity. The paired t-test results showed that power value of EEG did not alter significantly at the frequency of stimulation (P < 0.05). Further, significant changes in different EEG bands caused by locally exposing to ELF-MF in different points of brain were observed. The changes in the EEG bands were not limited necessarily to the exposure point.     

Minimal Erythema Dose (MED) Testing

Ultraviolet radiation (UV) therapy is sometimes used as a treatment for various common skin conditions, including psoriasis, acne, and eczema. The dosage of UV light is prescribed according to an individual''s skin sensitivity. Thus, to establish the proper dosage of UV light to administer to a patient, the patient is sometimes screened to determine a minimal erythema dose (MED), which is the amount of UV radiation that will produce minimal erythema (sunburn or redness caused by engorgement of capillaries) of an individual''s skin within a few hours following exposure. This article describes how to conduct minimal erythema dose (MED) testing. There is currently no easy way to determine an appropriate UV dose for clinical or research purposes without conducting formal MED testing, requiring observation hours after testing, or informal trial and error testing with the risks of under- or over-dosing. However, some alternative methods are discussed.     

A Resonant System for In Vitro Studies Emulating Wireless Power Transfer Exposure at 13.56 MHz

This paper presents the design of a resonant system for in vitro studies to emulate the exposure of a monolayer of cells to a wireless power transfer system operating at 13.56 MHz. The design procedure targets a system, which maximizes the specific absorption rate (SAR) uniformity on the plane where the layer is cultured, as well as SAR efficiency (defined as SAR over the input power), within the size constraints of a standard incubator. Three resonant wireless power transfer systems with different commonly used loop/coil geometries (cylindrical with circular and square cross-sections and annular) were compared with assess the configuration maximizing the considered design criteria. The system performance in terms of reflection and transmission coefficients, as well as generated E- and H-fields, was characterized numerically and experimentally inside the incubator. Moreover, SAR was computed at the monolayer level. The system equipped with cylindrical coils with square cross-sections led to a high electromagnetic field uniformity in in vitro biological samples. In particular, the uniformities in E and SAR at the layer level were within 7.9% and 5.5%, respectively. This was achieved with the variation in H below the usually considered ±5% limit. © 2020 Bioelectromagnetics Society     

Characterisation of Bacillus thuringiensis mutant highly producing melanin pigment and active against potato tuber moth

The bacteria Bacillus thuringiensis mutant is highly producing melanin pigment with increased ultra violet resistance and insecticidal activity against the potato tuber moth Phthorimaea operculella (Zeller). The results showed that the high decrease of crystal protein formation rate ranged from 100% (B.t.EMS-M2 and B.t.EMS-M6) to 91.82% (B.t.EMS-M9). The EMS–UV-induced mutants (B.t.EMS–UV-2h-1, B.t. EMS–UV-2h-2, B.t.EMS–UV-2h-3, B.t.EMS–UV-2h-5, B.t.EMS–UV-4h-1, B.t.EMS–UV-4h-3 and B.t.EMS–UV-6h-2) showed 100% decrease in the crystal protein formation. Results also showed that the growth rate of B. thuringiensis isolates was detected by measuring the light absorption of culture broth (BP media at pH 8) at the wavelength of 600 nm. The absorbance values of the standard melanin were 2.055 and 0.134 at wavelengths of 226.5 and 602 nm, respectively. This means that the maximum absorbance at wavelength was 226.5 nm, this result is similar to that of the synthetic melanin which has the absorbance of 226 nm. Our experiments detected that the pigment extracted from the mutant isolate B.t.EMS-M3 (EMS-induced mutant) gave the maximum value of absorbance (2.615) at wavelength of 227.5 nm that was similar to standard melanin which gave absorbance value about 2.055 at a wavelength of 226.5 nm. This may be due to the genetic alterations that happened to the mutant isolates due to the mutation by EMS or/and UV irradiation.     

The extrapituitary prolactin promoter polymorphism is associated with rheumatoid arthritis and anti-CCP antibodies in Mexican population

Prolactin (PRL) is a hormone–cytokine that has been involved in autoimmunity due to its immunoregulatory and lymphoproliferative effects. It is produced by various extrapituitary sites including immune cells, under control of a superdistal promoter that contains a single nucleotide polymorphism − 1149 G/T previously associated with rheumatoid arthritis (RA) susceptibility in European population. The aim of this study was to investigate the association of the extrapituitary PRL − 1149 G/T promoter polymorphism with clinical parameters, clinical activity and disability indices in RA patients from Western Mexico and to analyze the PRL mRNA expression according to the PRL − 1149 G/T promoter polymorphism in total leucocytes from RA patients and controls. We conducted a case–control study that included 258 RA patients and 333 control subjects (CS). The DNA samples were genotyped using the PCR–RFLP method and the PRL mRNA expression was determined by quantitative real time PCR. PRL serum levels and antibodies to cyclic citrullinated peptides (anti-CCP) were measured with ELISA. We found significant differences in the genotype (p = 0.022) and allelic (p = 0.046) distribution of the polymorphism between RA patients and control subjects. According to the dominant genetic model, there is an association between the T allele (GT + TT genotypes) and decreased RA susceptibility in comparison to the G allele carriers (GG genotype) (OR 0.64, 95% CI 0.45–0.92; p = 0.011). The T allele carriers (GT + TT genotypes) had lower titers of anti-CCP antibodies in comparison to the G allele carriers (GG genotype) (median, 66 U/mL vs. 125 U/mL; p = 0.03). Furthermore, the GG homozygotes had higher PRL mRNA expression in comparison to the GT heterozygotes, and this latter with respect to the TT homozygotes, in both groups (RA: 1 > 0.72 > 0.19; CS: 1 > 0.54 > 0.28). However, PRL serum levels were similar in both groups. Our results suggest that the PRL − 1149 T allele is a genetic marker for decreased RA susceptibility and is associated with lower titers of anti-CCP antibodies in Mexican population. We also suggest influence of genotype upon PRL mRNA expression.     

Random forests-based differential analysis of gene sets for gene expression data

In DNA microarray studies, gene-set analysis (GSA) has become the focus of gene expression data analysis. GSA utilizes the gene expression profiles of functionally related gene sets in Gene Ontology (GO) categories or priori-defined biological classes to assess the significance of gene sets associated with clinical outcomes or phenotypes. Many statistical approaches have been proposed to determine whether such functionally related gene sets express differentially (enrichment and/or deletion) in variations of phenotypes. However, little attention has been given to the discriminatory power of gene sets and classification of patients.     

Genes alternations with exposure time of environmental factors

A theoretical model discussing the environmental factors (EFs) effect of exposure time on genes, which leads to human diseases, is presented using multi-logistic model. The advantages and limitations of this model are discussed in terms of its usefulness for simulating genetic samples. It has been shown that EFs affect genes with the same degree both at high exposure level, low exposure time and at low exposure level, high exposure time.