Cone penetrometer testing,hydropunch®, and borehole geophysics applications for environmental investigations

An effective groundwater monitoring system can be implemented by the combined utilization of cone penetrometer (CPT), HydroPunch^® sampling, and borehole geophysical methods. The combined techniques provide a cost‐effective method for the design of a groundwater monitoring system for geologists or hydrogeologists assessing a site. With the relatively high costs associated with determining groundwater quality for site assessments, coupled with regulatory agency compliance, these combined methods can provide an effective edge in an increasingly competitive environmental industry. CPT combined with HydroPunch sampling can delineate the horizontal and vertical extent and concentration of a contaminant plume, define the extent and thickness of a free product plume, define soil and aquifer characteristics, and aid in the proper selection of well location and screen placement. The use of borehole geophysics further enhances the interpretation provided from the CPT. The interpretation of borehole geophysics provides additional information about the deposition regime of the area of investigation and a more detailed investigation of the stratigraphy. The CPT and HydroPunch can be used in unconsolidated sediments, and HydroPunch sampling can be combined with a hollow‐stem auger system. Borehole geophysics can be run in almost any environment. CPT and borehole geophysics provide information on specific lithologic characteristics necessary to obtain a groundwater sample from vertically separated aquifers. The HydroPunch can obtain a discrete, chemically representative groundwater sample from the targeted aquifer. CPT and borehole geophysics can also be used to determine lithology and for correlation of equivalent stratas from one borehole or well to the next. Borehole geophysical interpretation also provides a means of determining not only the stratigraphy and lithology but also the aquifer parameters and the type of fluids in the aquifer. Hydrogeologic and geologic data obtained from using these three methods can be employed to maximize the cost‐effectiveness and design efficiency of a groundwater monitoring system. Proper location of wells and screened interval placements are determined by a coherent design process rather than by random chance. Two studies demonstrating the combined applications of CPT, HydroPunch, and borehole geophysics for the design and placement of groundwater monitoring wells are presented in the following discussion.     

A review of the bioavailability of petroleum constituents

Exposure to petroleum constituents at contaminated sites may occur through a variety of pathways, including inhalation of vapors and particulates, ingestion of water and soils, and dermal contact with water and soils. Accurately assessing the human health risks from such exposures requires information on the medium‐ and route‐specific bioavailability of petroleum constituents (e.g., how well these chemicals enter the body via the gastrointestinal tract and skin). For example, when the medium or exposure route in an animal toxicity assay (e.g., ingestion of water) differs from the actual route of human exposure at the petroleum contaminated site (e.g., dermal contact with soil), adjustments should be made that reflect the relative bioavailability of the chemical in the different media. The focus of this article is on (1) the availability of oral and dermal absorption data for one PAH (benzo[a]pyrene, (B[a]P) and three VOCs in soil (benzene, toluene, and xylene); (2) factors affecting the uptake of these PAHs and VOCs from soil; and (3) ways to incorporate bioavailability data into human health risk assessments. Based on our review, we recommend the following default values for the oral and dermal absorption of B[a]P, benzene, toluene, and xylene from soil:

A review of the bioavailability of petroleum constituents

All authors

Jennifer Bramard & Barbara D. Beck

https://doi.org/10.1080/15320389209383417

Published online:

02 December 2008

Display Table

Site‐specific information such as chemical concentrations in soil, soil characteristics, soil loadings on the skin, contact site, and contact time could result in modifications of these numbers. As shown, our default absorption values are generally less than those recommended by the U.S. EPA (1991a,b,c). The implications of these estimates of bioavailability for risk assessment and for the selection of soil cleanup levels at petroleum‐contaminated sites are discussed.     

Development of a technique to study seedling emergence in response to moisture deficit in the field —The seed bed environment*

The ability of crops of sorghum (Sorghum bicolor (L.) Moench) to establish in farmers' fields depends largely on its capacity to germinate and emerge under limited soil moisture conditions. Studies on germination under moisture stress have been previously conducted using osmotic media which do not wholly reproduce the conditions of the seed bed in the field. Hence the need for a field screening technique. A line source irrigation system was used to provide five moisture regimes ranging from -0.08 MPa to -0.92 MPa. The drying rate of the soil and the soil temperature depended largely on incident radiation, and the relationship between the moisture content and daily soil temperature and daily radiation was consistant. Total porosity of the seed bed, derived from bulk density measurements and particle density ranged from 43.8% to 45.3%, which would allow sufficient aeration when as in the experiments conducted here, water content was low (> 0.14 g/g). Under these seed bed conditions the pattern of response of emergence to the moisture gradient was linear or curvilinear. Genotypic differences existed for emergence and its response to water level. The field method developed is useful for identifying genotypes able to germinate and emerge under conditions of low seed bed moisture.     

Estimating thermal properties of simulated aquatic soils from their composition

Heat penetration and thermal lag in the submersed soil surrounding the roots of aquatic plants depends on two fundamental thermal properties of the substrate, volumetric heat capacity (C_V) and thermal conductivity (k). The relationship of these parameters to the fractions of organic and mineral matter, gas and water in natural and simulated aquatic soils was investigated. The gas fraction was found to be insignificant and it was possible to make good estimates of C_V and k from a knowledge of substrate water content alone.     

Electric field promotion of the bacteriorhodopsin BR570 to BR412 photoconversion in films of Halobacterium halobium purple membranes

The combined action of electric field (10⁵–10⁷ V · m^?1) and light (380–580 nm, 80 W · m^?2) activating the photoenergetic reaction of bacteriorhodopsin (BR) in dry films of purple membranes from Halobacterium halobium was studied. A new stimulating effect of the field on the BR₄₁₂ intermediate accumulation in the normal photochromic cycle of BR₅₇₀ has been observed. The formation of the product BR₄₁₂ is supposed to be accompanied by specific rearrangements of certain charged, polar and polarizable groups in the BR pigment-protein matrix. Such an intrinsic polarization could be promoted by an external electric field, the displacement vector of those groups being oriented in the direction of the field. The dielectric polarization properties of the purple membranes have been demonstrated by electret-thermal analysis.     

滇南喀斯特地区灌木群落和人工林土壤元素化学计量特征

在云南喀斯特地区,为提升退化灌木群落的生态系统服务功能,营造了不同树种的人工林分。这些人工林分如何影响土壤化学性质还未得到充分认识。以云南泸西县灌木群落及三种常见人工林(云南松(Pinus yunnanensis)、赤杨(Alnus japonica)和侧柏(Platycladus orientalis))土壤为研究对象探讨喀斯特地区在人工林建造后土壤的13种元素全量、可利用性含量和化学计量学特征变异格局,为喀斯特石漠化治理提供理论依据。结果表明,1)基于判别分析,四种群落土壤化学计量特征可以显著区分。土壤Fe、P、K、Mn全量及交换性Ca、交换性Mg和NH_4~+-N对区分四种群落土壤贡献最大。2)四种群落之间相比,侧柏林土壤C、N、S、Na全量和NO_3~--N含量均低于其他三种群落,土壤肥力较低;赤杨林铵态氮含量最高;云南松林有效Fe、有效Cu含量/N、C素具有显著相关性,占所有元素对数的38.5%,说明该地土壤元素积累的相互依赖性。与灌木群落相比,人工林土壤元素全量和可利用性含量相关性比例均更高。这些研究结果对今后基于适地适树人工林营造、生态系统服务功能提升和经营利用,均具有重要指导意义。     

氮磷添加与不同栽植密度交互对樟树幼苗土壤化学性质的短期影响

研究氮磷添加对不同密度樟树(Cinnamomum camphora)幼苗土壤化学性质的影响,以期为全球化背景下樟树人工林生态系统的土壤养分管理提供依据。以1年生樟树幼苗为试验材料,选择氯化铵(NH4Cl)作为氮肥模拟大气氮沉降,以二水合磷酸二氢钠(NaH_2PO_4·2H_2O)模拟磷添加。氮磷处理设置CK、施N、施P和施N+P 4个水平,其中N、P和N+P施肥量分别为40 g m~(-2)a~(-1)(NH_4Cl)、20 g m-2a-1(NaH_2PO_4·2H_2O)和40g m~(-2)a~(-1)(NH_4Cl)+20 g m~(-2)a~(-1)(NaH_2PO_4·2H_2O)。种植密度设置4个水平:10、20、40和80株/m~2,试验时间为2017年6月至9月。研究结果表明,在各密度幼苗土壤中,N和N+P处理引起pH值的显著下降,N、P和N+P处理的土壤有机质和碱解N含量的变化规律不明显,P处理的幼苗土壤全P含量上升,P和N+P处理的土壤有效P含量增加,N+P处理的土壤全K含量以及N、P和N+P处理的土壤速效K含量均下降。在10、20和40株/m~2幼苗的土壤中,P处理的土壤全N含量高于N和N+P处理的,而80株/m~2幼苗的土壤全N含量低于其他密度幼苗。随着种植密度的增加,各施肥处理的土壤pH、全P、有效P、全K和速效K含量均呈现上升趋势,而施N和施P处理的土壤有机质呈现下降趋势,各施肥处理的土壤碱解N含量变化规律不明显。施肥和密度处理对樟树幼苗土壤有机质、碱解氮和速效钾含量有显著的交互作用。     

喀斯特洞穴小型土壤节肢动物多样性

研究洞穴土壤节肢动物,有助于了解土壤节肢动物对特殊环境的响应,对于深入认识喀斯特生态过程具有重要意义。以喀斯特洞穴生态系统小型土壤节肢动物为研究对象,采用主成分分析、重复测量方差分析、相关性分析和冗余分析等方法探讨了小型土壤节肢动物与环境因子的相互作用关系。调查共获得小型土壤节肢动物2399个,隶属7纲15目121科。其中,自然林优势类群为等节跳科(Isotomidae),洞穴优势类群为奥甲螨科(Oppiidae)。PCA分析显示,洞穴与自然林小型土壤节肢动物群落组成差异明显。洞穴小型土壤节肢动物类群数、密度和Shannon-Wiener指数(H′)显著低于自然林(P<0.05),自然林小型土壤节肢动物类群数、密度和Shannon-Wiener指数(H′)季节差异显著(P<0.05),洞穴类群数、密度和Shannon-Wiener指数(H′)季节差异不明显。相关性分析结果表明,小型土壤节肢动物类群数和Shannon-Wiener指数(H′)与pH值、全磷和光照强度显著相关(P<0.05),密度与pH值、全磷、有机质和光照强度显著相关(P<0.05)。RDA分析表...     

高寒山区不同土地利用类型土壤养分化学计量特征及影响因素

了解高寒地区不同土地利用类型下土壤养分化学计量特征及其影响因素可为评估脆弱生态系统土壤质量和功能提供参数。通过测定青海省东部24个样点0—30 cm土壤基本理化性质(pH、容重BD、孔隙度P_s、黏粒含量C_y、土壤含水量SWC、有机碳SOC、全氮TN、全磷TP、速效氮AN和速效磷AP),并提取各样点环境因子数据(年均温MAT、年均降雨量MAP、年均蒸发量E_a、植被归一化指数NDVI、海拔ALT、坡度SG、地表粗糙度SR、经度LON和纬度LAT),分析了农、林、草三种土地利用类型下土壤养分化学计量比分布特征及其影响因素。结果表明,农地土壤有机碳SOC和全氮TN含量显著低于林地和草地(P<0.05),而全磷TP和速效磷AP含量则相反,农、林、草地速效氮AN含量无显著差异(P>0.05)。农、林、草地不同深度土壤C∶N(平均值19.93,变异系数<16%)和AN∶AP(平均值2.73,变异系数<71%)较为稳定且无显著差异(P>0.05),而农地C∶P和N∶P(平均值分别为19.27和0.99)却显...