Computational Investigations of the Chalcogen-Substituted Carboxylic Acids RC(=O)XH and RC(=X)OH and their Dimers [RC(=O)XH]2 and [RC(=X)OH]2 (X=S, Se, Te)

Semiempirical and ab initio theoretical methods have been used to investigate molecular structures of the chalcogen-substituted carboxylic acid isomers RC(=O)XH (chalcogenol acid) and RC(=X)OH (chalcogenon acid). A recent experimental report suggests that the chalcogenon isomers, although less stable at room temperature, predominate at low temperature in polar solvents and that there is only a small barrier to isomerization between the isomers. Theoretical calculations have been used to locate minimum energy structures of chalcogen-substituted carboxylic acid isomers and to calculate energy differences between pairs of isomers. Carboxylic acids are well known to dimerize, especially in the gas phase and in non-polar solvents. We have, therefore, also calculated energies of dimerization of the chalcogen-substituted acids by optimizing the geometries of the symmetric dimers. We note that the PM3 level of theory is only qualitatively correct for sulfur- and selenium-containing species but fails even qualitatively for the tellurium-containing compounds. Ab initio results confirm the experimental observations and provide good estimates of both isomerization and dimerization energies. We conclude that for many functional groups with tautomers RC(=X)YH and RC(=Y)XH, the more acidic tautomer is the one with the acid proton on the smaller, more electronegative atom, although in many cases this may not be the more stable tautomer.Electronic Supplementary Material available.     

Cold induction of EARLI1, a putative Arabidopsis lipid transfer protein, is light and calcium dependent

As sessile organisms, plants must adapt to their environment. One approach toward understanding this adaptation is to investigate environmental regulation of gene expression. Our focus is on the environmental regulation of EARLI1, which is activated by cold and long‐day photoperiods. Cold activation of EARLI1 in short‐day photoperiods is slow, requiring several hours at 4 °C to detect an increase in mRNA abundance. EARLI1 is not efficiently cold‐activated in etiolated seedlings, suggesting that photomorphogenesis is necessary for its cold activation. Cold activation of EARLI1 is inhibited in the presence of the calcium channel blocker lanthanum chloride or the calcium chelator EGTA. Addition of the calcium ionophore Bay K8644 results in cold‐independent activation of EARLI1. These data suggest that EARLI1 is not an immediate target of the cold response, and that calcium flux affects its expression. EARLI1 is a putative secreted protein and has motifs found in lipid transfer proteins. Over‐expression of EARLI1 in transgenic plants results in reduced electrolyte leakage during freezing damage, suggesting that EARLI1 may affect membrane or cell wall stability in response to low temperature stress.     

Phase transition kinetics of phosphatidic acid bilayers A stopped-flow study of the electrostatically induced transition

The kinetics of the electrostatically induced phase transition of dimyristoyl phosphatidic acid bilayers was followed using the stopped-flow technique. The phase transition was triggered by a fast change in the pH or the magnesium ion concentration and followed by recording the time dependence of the absorbance. When the phase transition was induced by a pH jump the time course of the absorbance could be described by two exponentials, their time constants displaying the for cooperative processes characteristic maximum at the transition midpoint. The time constants are in the 10 and 100 ms range for the H⁺ triggered transition from the fluid to the ordered state. A third slower process shows no appreciable temperature dependence and is probably caused by vesicle aggregation. For the OH^--induced transition fron the ordered to the fluid state the time constants are in the 100 and 1000 ms range. The fluid-ordered transition could also be triggered by addition of magnesium ions. Of the several observed processes only the fastest in the 10–100 ms time range could definitely be assigned to the fluid-ordered transition while the others are due to aggregation phenomena. The experimental data were compared with results obtained from pressure jump experiments and could be interpreted on the basis of theories for non-equilibrium relaxation.     

Microhabitat nest‐site selection by ducks in the boreal forest

The boreal forest is one of the North America’s most important breeding areas for ducks, but information about the nesting ecology of ducks in the region is limited. We collected microhabitat data related to vegetation structure and composition at 157 duck nests and paired random locations in Alberta’s boreal forest region from 2016 to 2018. We identified fine‐scale vegetation features selected by ducks for all nests, between nesting guilds, and among five species using conditional logistic regression. Ducks in the boreal forest selected nest sites with greater overhead and graminoid cover, but less forb cover than random sites. Characteristics of the nest sites of upland‐ and overwater‐nesting guilds differed, with species nesting in upland habitat selecting nests that provided greater shrub cover and less lateral concealment and species nesting over water selecting nests with less shrub cover. We examined the characteristics of nest sites of American Wigeon (Mareca americana), Blue‐winged Teal (Spatula discors), Green‐winged Teal (Anas crecca), Mallards (Anas platyrhynchos), and Ring‐necked Ducks (Aythya collaris), and found differences among species that may facilitate species coexistence at a regional scale. Our results suggest that females of species nesting in upland habitat selected nest sites that optimized concealment from aerial predators while also allowing detection of and escape from terrestrial predators. Consequently, alteration in the composition and heterogeneity of vegetation and predator communities caused by climate change and industrial development in the boreal forest of Canada may affect the nest‐site selection strategies of boreal ducks.     

The effects of deuterium oxide (2H2O) on the polymerization of tubulin in vitro

The initial rate and final extent of polymerization of both bovine brain tubulin and sea urchin egg tubulin were enhanced in the presence of ²H₂O. The yields were increased in association with the elevation of the ²H₂O concentration. ²H₂O also reduced the critical concentration for polymerization of brain tubulin. Thermodynamic analysis was attempted using the temperature dependence of the critical concentration for polymerization in the presence of ²H₂O. We obtained linear van 't Hoff plots and calculated thermodynamic parameters which were positive and were increased with the elevation of the ²H₂O concentration. The enhancement of the polymerization of tubulin by ²H₂O could, therefore, be the result of the strenghening of intra-and/or inter-molecular hydrophobic interactions of the tubulin molecules. We believe that the increase in lenghth and number of microtubules of the mitotic spindles in the dividing cells of the eukaryotes with ²H₂O may be caused by the direct involvement of ²H₂O in the polymerization of tubulin.     

MicroID2: A Novel Biotin Ligase Enables Rapid Proximity-Dependent Proteomics

Identifying protein–protein and other proximal interactions is central to dissecting signaling and regulatory processes in cells. BioID is a proximity-dependent biotinylation method that uses an “abortive” biotin ligase to detect proximal interactions in cells in a highly reproducible manner. Recent advancements in proximity-dependent biotinylation tools have improved efficiency and timing of labeling, allowing for measurement of interactions on a cellular timescale. However, issues of size, stability, and background labeling of these constructs persist. Here we modified the structure of BioID2, derived from Aquifex aeolicus BirA, to create a smaller, highly active, biotin ligase that we named MicroID2. Truncation of the C terrminus of BioID2 and addition of mutations to alleviate blockage of biotin/ATP binding at the active site of BioID2 resulted in a smaller and highly active construct with lower background labeling. Several additional point mutations improved the function of our modified MicroID2 construct compared with BioID2 and other biotin ligases, including TurboID and miniTurbo. MicroID2 is the smallest biotin ligase reported so far (180 amino acids [AAs] for MicroID2 versus 257 AAs for miniTurbo and 338 AAs for TurboID), yet it demonstrates only slightly less labeling activity than TurboID and outperforms miniTurbo. MicroID2 also had lower background labeling than TurboID. For experiments where precise temporal control of labeling is essential, we in addition developed a MicroID2 mutant, termed lbMicroID2 (low background MicroID2), that has lower labeling efficiency but significantly reduced biotin scavenging compared with BioID2. Finally, we demonstrate utility of MicroID2 in mass spectrometry experiments by localizing MicroID2 constructs to subcellular organelles and measuring proximal interactions.     

Synthesis of novel acetylene-containing amino acids

Summary.  Novel synthetic procedures for the modification of non-proteinogenic acetylene-containing amino acids have been developed. The functionalization either proceeds via zinc/copper-mediated introduction of alkyl substituents, or via tungsten-catalyzed ring-closing alkyne metathesis reactions. Received March 28, 2002 Accepted October 3, 2002 Published online December 18, 2002 Acknowledgements These investigations are supported (in part) by the Netherlands Research Council for Chemical Sciences (CW) with financial aid from the Netherlands Technology Foundation (STW). Authors' address: Floris P. J. T. Rutjes, Prof. Dr., Department of Organic Chemistry, University of Nijmegen, Toernooiveld 1, NL-6525 ED Nijmegen, The Netherlands, E-mail: rutjes@sci.kun.nl  2, selected data: ¹H NMR (300 MHz, CDCl₃) δ 5.32 (d, J = 7.7 Hz, 1H), 4.44–4.40 (m, 1H), 3.76 (s, 3H), 2.75–2.73 (d, J = 5.0 Hz, 2H), 1.44 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.0, 155.0, 80.3, 74.6, 52.6, 51.9, 41.7, 28.3, 24.0; mp = 55°C.  Typical procedure for 5: zinc dust (116 mg, 1.408 mmol) was weighed into a 20 mL flask, which was repeatedly evacuated (with heating using a heat gun) and flushed with argon. Dry DMF (0.5 mL, distilled from CaH₂) and 1,2-dibromoethane (9.2 μL, 0.106 mmol) were added and the flask was heated at 80°C for 40 min. The reaction mixture was allowed to cool to room temperature, trimethylsilyl chloride (4 μL, 0.035 mmol) was added and the resulting mixture was stirred vigorously for a further 30 min under argon. Iodocyclohexane (69 μl, 0.528 mmol) was added and stirred at room temperature for 3 h more after which stirring was ceased to settle the zinc. CuCN (41 mg, 0.458 mmol) and LiCl (40 mg, 0.915 mmol) were heated to 150°C for 2 h and cooled to room temperature. Addition of DMF (1 mL) formed a soluble CuCN·2LiCl complex within 5 min. After cooling the Cu-complex to −15°C, the organozinc reagent was added dropwise followed by the bromoacetylene 2 (116 mg, 0.352 mmol). The mixture was allowed to stir overnight at room temperature. Water was added and the suspension was extracted using heptane, washed with brine, dried (MgSO₄) and concentrated. Purification using flash column chromatography (10% EtOAc in heptane) yielded 5 (100 mg, 81%) as a colorless oil. 5: IR ν 3355, 2929, 2852, 2359, 2337, 1749, 1717, 1498, 1447, 1365, 1251, 1181, 1060; ¹H NMR (300 MHz, CDCl₃) δ 5.28 (d, J = 7.7 Hz, 1H), 4.43–4.38 (m, 1H), 3.73 (s, 3H), 2.69–2.63 (m, 2H), 2.13 (m, 1H), 1.73–1.22 (m, 10H), 1.43 (s, 9H); ¹³C NMR (75 MHz, CDCl₃) δ 171.4, 155.0, 88.1, 79.9, 73.8, 52.3, 32.7, 32.7, 28.8, 28.2, 25.8, 24.6, 23.1; HRMS (EI): calculated for C₁₇H₂₇NO₄ 309.1940, found 309.1937.  A solution of the tungsten catalyst (7 mg, 10 mol%) in C₆H₅Cl (2 mL) was treated with a solution of 14 (49.0 mg, 0.120 mmol) in C₆H₅Cl (5.0 mL) under an argon atmosphere and the resulting mixture was heated at 80°C for 3 h. Evaporation followed by flash column chromatography (80% EtOAc in heptane) afforded 15 (21.0 mg, 50%; 64% after correction for starting material) and 14 (16 mg, 33%) as colorless oils. 15: [α]_D =–14.6 (c = 1, CH₂Cl₂); IR ν 3313, 2931, 2865, 2249, 1744, 1667, 1520, 1366, 1170; ¹H NMR (400 MHz, CDCl₃) δ 7.14 (d, J = 8.7 Hz, 1H), 6.08 (d, J = 8.3 Hz, 1H), 4.78 (q, J = 6.8 Hz, 1H), 4.27 (q, J = 7.9 Hz, 1H), 3.73 (s, 3H), 2.17–2.15 (m, 4H), 2.07–1.96 (m, 2H), 1.79–1.52 (m, 4H), 1.45 (s, 9H), 0.89–0.83 (m, 2H); ¹³C NMR (100 MHz, CDCl₃) δ 173.2, 171.8, 155.8, 80.4, 80.2, 79.3, 53.8, 52.5, 51.2, 32.8 (2×), 28.1, 24.6, 24.2, 18.3 (2×); HRMS (EI): calculated for C₁₈H₂₈N₂O₅