Performance of a composite membrane bioreactor for the removal of ethyl acetate from waste air

Ethyl acetate removal from an air stream was carried out by using a flat composite membrane bioreactor. The composite membrane consisted of a dense polydimethylsiloxane top layer with an average thickness of 0.3 μm supported in a porous polyacrylonitrile layer (50 μm). The membrane bioreactor (MBR) was operated during 3 months, and a maximum elimination capacity of 225 g m⁻³ h⁻¹ at an empty bed residence time of 60 s was observed. Removal efficiencies higher than 95% were obtained for inlet loads lower than 200 g m⁻³ h⁻¹ and empty bed residence times as short as 15 s. The estimated yield coefficient, determined from the carbon dioxide production, resulted in 0.82 g dry biomass synthesized per gram of ethyl acetate degraded. No data of ethyl acetate treatment in MBR have been found in the literature, but the results illustrate that membrane bioreactors can potentially be a good option for its treatment.     

Viscoelastic evaluation of topical creams containing microcrystalline cellulose/sodium carboxymethyl cellulose as stabilizer

The purpose of this study was to examine the viscoelastic properties of topical creams containing various concentrations of microcrystalline cellulose and sodium carboxymethyl cellulose (Avicel(R) CL-611) as a stabilizer. Avicel CL-611 was used at 4 different levels (1%, 2%, 4%, and 6% dispersion) to prepare topical creams, and hydrocortisone acetate was used as a model drug. The viscoelastic properties such as loss modulus (G"), storage modulus (G'), and loss tangent (tan delta) of these creams were measured using a TA Instruments AR 1000 Rheometer and compared to a commercially available formulation. Continuous flow test to determine the yield stress and thixotropic behavior, and dynamic mechanical tests for determining the linear viscosity time sweep data, were performed. Drug release from the various formulations was studied using an Enhancer TM Cell assembly. Formulations containing 1% and 2% Avicel CL-611 had relative viscosity, yield stress, and thixotropic values that were similar to those of the commercial formulation. The elastic modulus (G') of the 1% and 2% formulation was relatively high and did not cross the loss modulus (G"), indicating that the gels were strong. In the commercial formulation, G' increased after preshearing and broke down after 600 seconds. The strain sweep tests showed that for all formulations containing Avicel CL-611, the G' was above G" with a good distance between them. The gel strength and the predominance of G' can be ranked 6% > 4% > 2%. The strain profiles for the 1% and 2% formulations were similar to those of the commercial formulation. The delta values for the 1% and 2% formulations were similar, and the formulations containing 4% Avicel CL-611 had lower delta values, indicating greater elasticity. Drug release from the commercial preparation was fastest compared to the formulations prepared using Avicel CL-611, a correlation with the viscoelastic properties. It was found that viscoelastic data, especially the strain sweep profiles of products containing Avicel CL-611 1% and 2%, correlated with the commercial formulation. Rheological tests that measure the viscosity, yield stress, thixotropic behavior, other oscillatory parameters such as G' and G" are necessary tools in predicting performance of semisolids.     

Enzymes of the citramalate cycle in <Emphasis Type="Italic">Rhodospirillum rubrum</Emphasis>

Rhodospirillum rubrum is among the bacteria that can assimilate acetate in the absence of isocitrate lyase, the key enzyme of glyoxylate shunt. Previously we have suggested the functioning of a new anaplerotic cycle of acetate assimilation in this bacterium: citramalate cycle, where acetyl-CoA is oxidized to glyoxylate. This work has demonstrated the presence of all the key enzymes of this cycle in R. rubrum extracts: citramalate synthase catalyzing condensation of acetyl-CoA and pyruvate with the formation of citramalate, mesaconase forming mesaconate from L-citramalate, and the enzymes catalyzing transformation of propionyl-CoA + glyoxylate 3-methylmalyl-CoA ? mesaconyl-CoA. At the same time, R. rubrum synthesizes crotonyl-CoA carboxylase/reductase, which is the key enzyme of ethylmalonyl-CoA pathway discovered recently in Rhodobacter sphaeroides. Physiological differences between the citramalate cycle and the ethylmalonyl-CoA pathway are discussed.     

A simple and rapid method for lithium acetate-mediated transformation of Kluyveromyces marxianus cells

Efficient plasmid transformation of Kluyveromyces marxianus cells of 1.9 × 10³ transformant μg⁻¹ DNA with an episomal plasmid was achieved by the use of a simple lithium acetate method with the addition of 10 mM DTT and an increased heat shock temperature of 47 °C. This method is shown to be also efficient for replicative plasmids. Therefore, we suggest its use as a routine method to transform K. marxianus cells. This revised version was published online in July 2006 with corrections to the Cover Date.     

Acetate enhances citric acid production by Yarrowia lipolytica when grown on sunflower oil

It was discovered that the addition of 10 g/l acetate to a medium containing 30 g/l sunflower oil caused a drastic increase in citric acid production by Yarrowia lipolytica UOFS Y-1701 i.e. from 0.5 g/l in the absence of acetate to 18.7 g/l in the presence of acetate. Similarly, the ratio of citric acid:isocitric acid increased significantly from 1.7:1 in the absence of acetate to 3.7:1 in the presence of acetate after 240 h of growth.     

Model-based analysis of anaerobic acetate uptake by a mixed culture of polyphosphate-accumulating and glycogen-accumulating organisms

An increasing number of studies shows that the glycogen-accumulating organisms (GAOs) can survive and may indeed proliferate under the alternating anaerobic/aerobic conditions found in EBPR systems, thus forming a strong competitor of the polyphosphate-accumulating organisms (PAOs). Understanding their behaviors in a mixed PAO and GAO culture under various operational conditions is essential for developing operating strategies that disadvantage the growth of this group of unwanted organisms. A model-based data analysis method is developed in this paper for the study of the anaerobic PAO and GAO activities in a mixed PAO and GAO culture. The method primarily makes use of the hydrogen ion production rate and the carbon dioxide transfer rate resulting from the acetate uptake processes by PAOs and GAOs, measured with a recently developed titration and off-gas analysis (TOGA) sensor. The method is demonstrated using the data from a laboratory-scale sequencing batch reactor (SBR) operated under alternating anaerobic and aerobic conditions. The data analysis using the proposed method strongly indicates a coexistence of PAOs and GAOs in the system, which was independently confirmed by fluorescent in situ hybridization (FISH) measurement. The model-based analysis also allowed the identification of the respective acetate uptake rates by PAOs and GAOs, along with a number of kinetic and stoichiometric parameters involved in the PAO and GAO models. The excellent fit between the model predictions and the experimental data not involved in parameter identification shows that the parameter values found are reliable and accurate. It also demonstrates that the current anaerobic PAO and GAO models are able to accurately characterize the PAO/GAO mixed culture obtained in this study. This is of major importance as no pure culture of either PAOs or GAOs has been reported to date, and hence the current PAO and GAO models were developed for the interpretation of experimental results of mixed cultures. The proposed method is readily applicable for detailed investigations of the competition between PAOs and GAOs in enriched cultures. However, the fermentation of organic substrates carried out by ordinary heterotrophs needs to be accounted for when the method is applied to the study of PAO and GAO competition in full-scale sludges.     

Heterologous expression of the<Emphasis Type="Italic"> Saccharomyces cerevisiae</Emphasis> alcohol acetyltransferase genes in<Emphasis Type="Italic"> Clostridium acetobutylicum</Emphasis> and<Emphasis Type="Italic"> Escherichia coli</Emphasis> for the production of isoamyl acetate

Esters are formed by the condensation of acids with alcohols. The esters isoamyl acetate and butyl butyrate are used for food and beverage flavorings. Alcohol acetyltransferase is one enzyme responsible for the production of esters from acetyl-CoA and different alcohol substrates. The genes ATF1 and ATF2, encoding alcohol acetyltransferases from the yeast Saccharomyces cerevisiae have been sequenced and characterized. The production of acids and alcohols in mass quantities by the industrially important Clostridium acetobutylicum makes it a potential organism for exploitation of alcohol acetyltransferase activity. This report focuses on the heterologous expression of the alcohol acetyltransferases in Escherichia coli and C. acetobutylicum. ATF1 and ATF2 were cloned and expressed in E. coli and ATF2 was expressed in C. acetobutylicum. Isoamyl acetate production from the substrate isoamyl alcohol in E. coli and C. acetobutylicum cultures was determined by head-space gas analysis. Alcohol acetyltransferase I produced more than twice as much isoamyl acetate as alcohol acetyltransferase II when expressed from a high-copy expression vector. The effect of substrate levels on ester production was explored in the two bacterial hosts to demonstrate the efficacy of utilizing ATF1and ATF2 in bacteria for ester production.     

Determination of prednisolone and the most important associated compounds in ocular and cutaneous pharmaceutical preparations by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic method to separate prednisolone, prednisolone acetate, naphazoline, Zn-bacitracin, sulfacetamide and phenylefrine is described. The separation was carried out by using a fused-silica capillary (57 cmx75 micrometer I.D.) at 25 degrees C and 30 kV, using a 5 mM phosphate-5 mM borate buffer adjusted to pH 8.2, 50 mM sodium dodecyl sulfate (SDS) and 10% methanol-water (v/v) as background electrolyte. Under these conditions, the run time was 8 min and the limits of quantification were about 1.0 mg/l for every component. The method was applied to pharmaceutical preparations and the results provided recoveries close to 100% and the method gave good results when compared with a reference multivariate calibration spectrophotometric method.     

Association of leukotriene B4 with the cytoskeleton of rabbit neutrophils. Effect of chemotactic factor and phorbol esters

Following its addition to a suspension of rabbit neutrophils, leukotriene B4 is rapidly (less than 1 min) recovered from the cytoskeletal fraction (Triton X-100 insoluble pellet) of these cells. The association of leukotriene B4 with the cytoskeleton can be competed with by leukotriene B4 itself and by 20-OH leukotriene B4 but not by 20-COOH leukotriene B4. In addition, the preincubation of the cells with fMet-Leu-Phe or with phorbol 12-myristate 13-acetate, but not with 4 alpha-phorbol 12,13-didecanoate, results in a greatly decreased association of leukotriene B4 with the cytoskeleton. These results suggest that a specific association between the leukotriene B4 receptors and the cytoskeleton may be involved in signal transduction in the leukotriene B4 stimulated neutrophils.     

Lethal Effects of Helianthemum lippii (L.) on Acanthamoeba castellanii Cysts in Vitro

Acanthamoeba spp. commonly cause Acanthamoeba keratitis which is typically associated with the wear of contact lenses. Therefore, finding an economic, efficient, and safe therapy of natural origin is of outmost importance. This study examined the in vitro lethal potential of ethyl acetate and methanol extracts of Helianthemum lippii (L.) (sun roses) against Acanthamoeba castellanii cysts isolated from patients with amoebic keratitis. Both extracts proved to be potent as regard to their lethal effects on A. castellanii cysts with comparable results to chlorhexidine. The ethyl acetate was more promising with cumulative lethality. It showed a highly significant lethal percentage along the duration of treatment. The analysis of the more potent ethyl acetate extract revealed the presence of 2.96 mg/100 g of total phenolics, 0.289 mg/100 ml of total flavonoids and 37 mg/100 mg of total tannins which highlighted their phytomedicinal role.