Tolerance to Diazepam-Induced Motor Impairment: A Study with GABAA Receptor α6 Subunit Knockout Mice

Development of tolerance to motor-impairing effects of repeated administration of moderate diazepam doses (5.0–7.5 mg/kg; three times daily PO 3 weeks) was compared between mice deficient in the cerebellar granule cell–restricted GABA_A receptor 6 subunit and their wild-type controls. The 6–/– mice were more impaired by the initial challenge doses of diazepam (5 or 10 mg/kg) than their controls, but acquired partial tolerance by the second tests with the same doses 4–7 days later. Chronic treatment produced complete tolerance in both mouse lines. Ligand autoradiography revealed a significant reduction in baseline benzodiazepine and chloride channel site-bindings in various regions of the 6–/– brains, but the chronic diazepam treatment did not consistently alter baseline or benzodiazepine site agonist and inverse agonist-modulated binding in the 6–/– and wildtype mice. The results indicate that tolerance to motor-impairing actions of diazepam is independent of the diazepam-insensitive 6 subunit-containing receptors, which rules out the possibility that tolerance emerges as an increase in structurally benzodiazepine-insensitive receptor population.     

Mechanism of bactericidal and fungicidal activities of textiles covalently modified with alkylated polyethylenimine

Our previous studies have led to a novel "nonrelease" approach to making materials bactericidal by covalently attaching certain moderately hydrophobic polycations to their surfaces. In the present work, this strategy is extended beyond the heretofore-used nonporous materials to include common woven textiles (cotton, wool, nylon, and polyester). Pieces of such cloths derivatized with N-hexylated+methylated high-molecular-weight polyethylenimine (PEI) are strongly bactericidal against several airborne Gram-positive and Gram-negative bacteria. In contrast, the immobilized and N-alkylated PEIs of low molecular weight have only a weak, if any, bactericidal activity. These findings support a mechanism of the antibacterial action whereby high-molecular-weight and hydrophobic polycationic chains penetrate bacterial cell membranes/walls and fatally damage them. The bactericidal textiles prepared herein are lethal not only to pathogenic bacteria but to fungi as well.     

Inhibitory effect of medium-chain-length fatty acids on synthesis of polyhydroxyalkanoates from volatile fatty acids by Ralstonia eutropha

Medium-chain-length fatty acids, such as nonanoic (9:0) and octanoic (8:0) acids, are more toxic to Ralstonia eutropha than volatile fatty acids such as acetic, propionic and butyric acids. Nonanoic acid was degraded to acetic and propionic acids via -oxidation by Ralstonia eutropha for cell growth and synthesis of polyhydroxyalkanoates (PHAs). In a mixture of the fatty acids, utilization of nonanoic acid was depressed by acetic and propionic acids, and vice versa. The PHA accumulation from the volatile fatty acids was decreased from 53% (w/w) of dry cell mass to 23% due to the nonanoic acid. Similar phenomena were also observed with octanoic acid and its metabolic intermediates, acetic and butyric acids.     

Successful molecular dynamics simulation of two zinc complexes bridged by a hydroxide in phosphotriesterase using the cationic dummy atom method

I report herein two 2.0 ns (1.0 fs time step) MD simulations of two zinc complexes bridged by a hydroxide in phosphotriesterase (PTE) employing the nonbonded method and the cationic dummy atom method that uses virtual atoms to impose orientational requirement for zinc ligands. The cationic dummy atom method was able to simulate the four-ligand coordination of the two zinc complexes in PTE. The distance (3.39 +/- 0.07A) between two nearby zinc ions in the time-average structure of PTE derived from the MD simulation using the cationic dummy atoms matched that in the X-ray structure (3.31 +/- 0.001A). Unequivocally, the time-average structure of PTE was able to fit into the experimentally determined difference electron density map of the corresponding X-ray structure. The results demonstrate the practicality of the cationic dummy atom method for MD simulations of zinc proteins bound with multiple zinc ions. In contrast, a 2.0 ns (1.0 fs time step) MD simulation using the nonbonded method revealed a striking difference in the active site between the X-ray structure and the time-average structure that was unable to fit into the density map of PTE. The results suggest that caution should be used in the MD simulations using the nonbonded method.     

Organopalladium(IV) and platinum(IV) complexes containing the bis(pyrazol-1-yl)borate ligand. Structures of PtMe3{(pz)2BH2}(py) (py=pyridine) and Pt(mq)Me2{(pz)2BH2} (mq=8-methylquinolinyl) and detection of a neutral organopalladium(IV) phosphine complex

Neutral palladium(IV) complexes containing the bis(pyrazol-1-yl)borate ligand, PdMe₃{(pz)₂BH₂}(L) [L=py-d₅ (4), PMe₂Ph (6)], are generated in solution by oxidative addition of iodomethane to [PdMe₂{(pz)₂BH₂}]⁻ at −70 °C followed by addition of L; the Pd(IV) complexes reductively eliminate ethane above 0 °C. Stable Pt(IV) analogues of 4 and 6 have been isolated, and comparison of NMR spectra for Pd(IV) and Pt(IV) species support structural assignments for the unstable Pd(IV) complexes. The complex PtMe₃{(pz)₂BH₂}(py) (1a) has been characterised by X-ray diffraction, together with Pt(mq)Me₂{(pz)₂BH₂} (2) (mq=8-methylquinolinyl); both complexes show a fac-PtC₃ configuration for Pt(IV), and for 2 the PtN distances are ∼0.03 Å shorter than in the isostructural Pd(IV) complex.     

Which side of the π-macrocycle plane of (bacterio)chlorophylls is favored for binding of the fifth ligand?

Reported crystallographic data and calculated molecular models indicated that chlorophyll (Chl) a and bacteriochlorophyll (BChl) a tend to bind the fifth ligand on the side of the macrocycle where the C13²-(R)-methoxycarbonyl moiety protrudes (denoting the ‘back’ side). The crystal structures of 34 photosynthetic proteins possessing (B)Chl cofactors revealed that most of Chl a and BChl a (and b) are coordinated by any peptidyl residue (e.g., histydyl-imidazolyl group), peptidyl backbone or water from the ‘back’ side. Almost all the cofactors that bind a water molecule as the fifth ligand in these proteins have a ‘back’ configuration. Theoretical model calculations for methyl chlorophyllide a (MeChlid a) and methyl bacteriochlorophyllide a (MeBChlid a) bound to an imidazole molecule indicated that the ‘back’ side is energetically favored for the ligand binding. These results are consistent with the fact that ethyl chlorophyllide a (EtChlid a) dihydrate crystal consists of the ‘back’ complex. The modeling also showed that both removal and stereochemical inverse of the C13²-methoxycarbonyl group affect the relative stability between the ‘back’ and ‘face’ complexes. The effect of the C13²-moiety on the choice of the macrocycle side for the ligand binding is discussed in relation to the function of P700. This revised version was published online in June 2006 with corrections to the Cover Date.     

Understanding the Hydraulics of Porous Pipes: Tradeoffs Between Water Uptake and Root Length Utilization

The water uptake region in roots is several hundred times longer than the root diameter. The distributed nature of the uptake zone requires that the hydraulic design of roots be understood by analogy to flow through a porous pipe. Here we present results of an analytical and experimental investigation that allowed an in-depth analysis of root hydraulic properties. Measurements on nodal maize roots confirm the nonlinear distribution of water uptake predicted by the porous pipe model. The major design parameter governing the distribution of water uptake along a porous pipe is the ratio between its axial and radial hydraulic resistance. However, total flow is proportional to the pipe's overall resistance. These results suggest the existence of a tradeoff between the effective utilization of root length and the total capacity for water uptake.     

Isolation and characterisation of resistant-to-fermentation carbohydrate polymers from cultures of Rhizopus nigricans grown on agrofood waste materials

Rhizopus nigricans was cultivated in a liquid medium using lemon, mandarin, orange, pear and melon peel or artichoke bracts as the carbon source. In all cultures, a carbohydrate polymer fraction remained resistant to fermentation. These fractions were isolated in gram amounts and characterised. The molecular weight distribution of the fractions and its sugar composition resembles those of the hairy-regions of the pectins. In the fractions, four main carbohydrates were found: 4-7 mol% Rha, 42-59 mol% Ara, 7-14 mol% Gal, 17-33 mol% GalA.     

Analysis of the behaviour of<Emphasis Type="Italic"> Dictyostelium discoideum</Emphasis> in immobilised state by means of continuous cultivation

The social amoeba Dictyostelium discoideum is amenable to cultivation in the immobilised state most simply by colonisation of porous supports. An analysis of the growth behaviour of D. discoideum in the immobilised state is reported. For this purpose, D. discoideum was cultivated in continuously operated reactors in a suspension culture (homogeneous system) and immobilised on a porous support (heterogeneous system). Thus, it is possible to compare homogeneous and heterogeneous systems under steady-state conditions. Immobilisation was achieved by the colonisation of porous glass beads (SIRAN). Simple models are applied in order to describe the growth behaviour of fractions of both the cells in free suspension and the cells inside the porous carrier. This analysis shows that D. discoideum inside the pores grows at a rate of only about 10% compared with that in free solution. The consequence of this behaviour is discussed in terms of reactor performance.     

Interconversion and disproportionation reaction among cyclodextrin homologues in an aqueous two-phase-forming solution

Interconversion reactions of cyclodextrin glycosyltransferase (CGTase) among cyclodextrin (CD) homologues were experimentally investigated using each CD as a substrate in an aqueous, two-phase-forming polymer solution of dextran and polyethylene glycol. Degradation rate of -CD was highest and that of -CD was lowest among -, - and -CD with Bacillus macerans CGTase. Degradation of each CD was accelerated with dextran, while decelerated with polyethylene glycol.