Interaction of poly(l-lysines) with negatively charged membranes: an FT-IR and DSC study

The influence of the binding of poly(l-lysine) (PLL) to negatively charged membranes containing phosphatidylglycerols (PG) was studied by DSC and FT-IR spectroscopy. We found a general increase in the main transition temperature as well as increase in hydrophobic order of the membrane upon PLL binding. Furthermore we observed stronger binding of hydration water to the lipid head groups after PLL binding. The secondary structure of the PLL after binding was studied by FT-IR spectroscopy. We found that PLL binds in an α-helical conformation to negatively charged DPPG membranes or membranes with DPPG-rich domains. Moreover we proved that PLL binding induces domain formation in the gel state of mixed DPPC/DPPG or DMPC/DPPG membranes as well as lipid remixing in the liquid–crystalline state. We studied these effects as a function of PLL chain length and found a significant dependence of the secondary structure, phase transition temperature and domain formation capacity on PLL chain length and also a correlation between the peptide secondary structure and the phase transition temperature of the membrane. We present a system in which the membrane phase transition triggers a highly cooperative secondary structure transition of the membrane-bound peptide from α-helix to random coil. Dedicated to Prof. K. Arnold on the occasion of his 65th birthday.     

Regioselective monoacylation of 2-O-α-d-glucopyranosyl-l-ascorbic acid by a polymer catalyst in N,N-dimethylformamide

6-O-Dodecanoyl-2-O-α-d-glucopyranosyl-l-ascorbic acid (6-sDode-AA-2G) was synthesized from 2-O-α-d-glucopyranosyl-l-ascorbic acid and lauric anhydride with a polymer catalyst, poly(4-vinylpyridine), in N,N-dimethylformamide without the introduction of protecting groups. The optimum reaction conditions enabled 6-sDode-AA-2G to be synthesized in a yield of 49.7%. The yield and the regioselectivity in this method were far superior to those in our previous method by using an enzyme. The polymer catalyst could be recycled more than five times without any significant activity loss.     

Contributions of the C-terminal domain to poly(A)-specific ribonuclease (PARN) stability and self-association

Poly(A)-specific ribonuclease (PARN) catalyzes the degradation of mRNA poly(A) tail to regulate translation efficiency and mRNA decay in higher eukaryotic cells. The full-length PARN is a multi-domain protein containing the catalytic nuclease domain, the R3H domain, the RRM domain and the C-terminal intrinsically unstructured domain (CTD). The roles of the three well-structured RNA-binding domains have been extensively studied, while little is known about CTD. In this research, the impact of CTD on PARN stability and aggregatory potency was studied by comparing the thermal inactivation and denaturation behaviors of full-length PARN with two N-terminal fragments lacking CTD. Our results showed that K⁺ induced additional regular secondary structures and enhanced PARN stability against heat-induced inactivation, unfolding and aggregation. CTD prevented PARN from thermal inactivation but promoted thermal aggregation to initiate at a temperature much lower than that required for inactivation and unfolding. Blue-shift of Trp fluorescence during thermal transitions suggested that heat treatment induced rearrangements of domain organizations. CTD amplified the stabilizing effect of K⁺, implying the roles of CTD was mainly achieved by electrostatic interactions. These results suggested that CTD might dynamically interact with the main body of the molecule and release of CTD promoted self-association via electrostatic interactions.     

Amino-functionalized zirconocene (C5H4CH(Me)NMe2)2ZrCl2, a catalyst for the dehydropolymerization of PhSiH3: Probing of peripheral substituent effects on catalyst dehydropolymerization activity

The amino-functionalized metallocene (C₅H₄CH(Me)NMe₂)₂ZrCl₂, [(Cp^N)₂ZrCl₂] was synthesized by salt metathesis of ZrCl₄ and 2 equiv. of C₅H₄CH(Me)NMe₂Li. The metallocene was obtained in good yield as a mixture of rac and meso diastereomers as established by NMR spectroscopy. The addition of 2 equiv. of n-BuLi to the metallocene (Cp^N)₂ZrCl₂ produced a co-catalyst system which was active, at a 1.0 mol% loading, in the dehydropolymerization of PhSiH₃ to poly(phenylsilane), PPSi. The PPSi was obtained as a 9:1 linear–cyclic mixture (M_w=3850, M_n=2300) as established by GPC analysis; ²⁹Si{¹H} NMR spectroscopy revealed an atactic polymer microstructure.     

Modelling of Structural and Vibrational Properties of Poly(p-Phenylene) and Polypyrrole Using Molecular Orbital Methods

Abstract

This paper concentrates on two very important conducting polymers poly(p-phenylene) and polypyrrole. Detailed atomistic molecular models have been developed with the help of ab initio and semi-empirical quantum mechanical calculations using the Cerius² and WinMOPAC (version 6.0) programs.

Their optimised geometry had been calculated and compared with experimental X-ray diffraction data. The simulated and experimental vibrational spectra of biphenyl as well as isolated pyrrole monomers and oligomers from n = 1 and 2, where n is the number of structural repeat units used, have been computed using the ab initio 3–21G basis set. The results obtained are compared with experimental data for the case of biphenyl and for oligomers with n = 2 to 5 for both neutral benzenoid and quinonoid oligopyrroles, from semi-empirical predictions obtained by AM1 and PM3. The trends in the computed harmonic force fields, vibrational frequencies and intensities are monitored as a function of the chain length. The data are analyzed in conjunction with the trends in computed equilibrium geometries.     

A simple model of the hydrophobic effect for molecular simulation of interfacial phenomena

A coarse-grained model for simulation of interfacial phenomena in aqueous systems has been developed. The model captures the hydrophobic effect by only considering the structure and cohesiveness of water. Monte Carlo (MC) simulations of water-oil mixtures show that low concentrations of oil are solvated with little perturbation of the hydrogen bonding network structure of the water, while high concentrations of oil are excluded altogether. Analysis of the water structure in the simulations indicates that the water molecules maintain close to four coordination in the presence of solutes and the distribution of bond angles is not markedly affected by the presence of solutes. MC simulations of an alkane oligomer in water and a poly(ethylene oxide) (PEO) oligomer in water indicate that the chains are quite flexible and also do not perturb the network structure of the water phase.     

Affinity precipitation an option for early capture in bioprocessing

Affinity precipitation is a bioseparation technique where the affinity ligand is coupled to a stimuliresponsive polymer. Stimuli-responsive polymers show abrupt, yet reversible, phase transition (precipitation) in response to a small change in an environmental parameter. The corresponding ligand conjugates can be used to co-precipitate and thereby capture and isolate target molecules from complex solutions such as culture supernatants and cell lysates. The approach is compatible with a 'discardibles only' type of downstream process and can be scaled over several orders of magnitude. This report discusses the set-up and development of affinity precipitation procedures, the related instrumentation and scale up, as well as applications for the isolation of proteins and polynucleotides.     

Poly(ethylene terephthalate) (PET) degradation by Yarrowia lipolytica: Investigations on cell growth,enzyme production and monomers consumption

The development of technologies for poly(ethylene terephthalate) (PET) depolymerization, such as biocatalysis, has been pointed as a very promising alternative to chemical hydrolysis processes. This work aims to understand the behavior of Yarrowia lipolytica, a robust yeast for diverse applications, in the presence of molecules from the PET production chain such as monoethylene glycol (MEG), terephthalic acid (TPA), bis (2-hydroxyethyl) terephthalate (BHET), PET oligomers, amorphous PET and post-consumer PET. The yeast was cultivated in rich media with and without glucose addition, in order to compare monomers release or consumption. TPA and MEG were consumed more intensely in the absence of glucose. The addition of the diester BHET yielded a 3-fold increased lipase production both at 160 rpm (118 U/L) and 250 rpm (385 U/L). In addition, 250 rpm agitation also provided a higher consumption of TPA (26% increase). The mono(2-hydroxyethyl) terephthalate (MHET) was the main intermediate released during polymer hydrolysis, followed by TPA and BHET. Thus, the use of Yarrowia lipolytica, which is capable of catalyzing the PET hydrolysis is of great potential to reduce the environmental impacts caused by unappropriated disposal of packages.     

Poly(3-hydroxybutyrate) synthesis from glycerol by a recombinant Escherichia coli arcA mutant in fed-batch microaerobic cultures

Poly(3-hydroxybutyrate) (PHB) synthesis was analyzed under microaerobic conditions in a recombinant Escherichia coli arcA mutant using glycerol as the main carbon source. The effect of several additives was assessed in a semi-synthetic medium by the ‘one-factor-at-a-time’ technique. Casein amino acids (CAS) concentration was an important factor influencing both growth and PHB accumulation. Three factors exerting a statistically significant influence on PHB synthesis were selected by using a Plackett–Burman screening design [glycerol, CAS, and initial cell dry weight (CDW) concentrations] and then optimized through a Box–Wilson design. Under such optimized conditions (22.02 g l⁻¹ glycerol, 1.78 g l⁻¹ CAS, and 1.83 g l⁻¹ inoculum) microaerobic batch cultures gave rise to 8.37 g l⁻¹ CDW and 3.52 g l⁻¹ PHB in 48 h (PHB content of 42%) in a benchtop bioreactor. Further improvements in microaerobic PHB accumulation were obtained in fed-batch cultures, in which glycerol was added to maintain its concentration above 5 g l⁻¹. After 60 h, CDW and PHB concentration reached 21.17 and 10.81 g l⁻¹, respectively, which results in a PHB content of 51%. Microaerobic fed-batch cultures allowed a 2.57-fold increase in volumetric productivity when compared with batch cultures. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. An erratum to this article can be found at