A proenkephalin A-derived peptide analogous to bovine adrenal peptide E from frog brain: Purification, synthesis, and behavioral effects

A peptide derived from the posttranslational processing of proenkephalin A was isolated from an extract of the brain of the European green frog Rana ridibunda and its primary structure established as: Tyr-Gly-Gly-Phe-Met-Arg-Arg-Val-Gly-Arg¹⁰-Pro-Glu-Trp-Trp-Gln-Asp-Tyr-Gln-Lys-Arg²⁰-Tyr-Gly-Gly-Phe-Met. The structure was confirmed by chemical synthesis. The peptide represents an amphibian equivalent of bovine adrenal peptide E [preproenkephalin A (206–230)-peptide] but the sequence contains two amino acid substitutions (Met¹⁵ → Gln and Leu²⁵ → Met) compared with the mammalian peptide. The data support previous hypotheses that the Leu-enkephalin sequence is not present in preproenkephalin A of amphibians. Intracerebroventricular injections of frog peptide E (10 and 100 ng) in mice had no significant effect on horizontal locomotor activity. The peptide, in doses up to 1 μg, had no effect on latency of escape jumping in the hot plate test and the peptide (100 ng) did not modify responses (paw licking, rearing, and escape jumping) in morphine-treated mice.     

The evolution of phage lysis timing

Summary The effect of host quantity and host quality on the evolution of phage lysis timing is analysed using marginal value theorem of optimal foraging theory. Both factors have been shown to strongly influence the latent period. A high host density selects for short latent period, which is the same result as previous investigators have found. A good host quality also promotes a short latent period. However, elasticity analysis shows that these two factors exert their influences under different sets of conditions. When host density is low, the host density is more important in determining the length of latent period, whereas when host density is high, the host quality is more important.     

Fruit set in a deceptive orchid: The effect of flowering phenology,display size,and local floral abundance

We investigated the effect of flowering time, display size, and local floral density on fruit set in Tolumnia variegata, a pollination-limited orchid that offers no reward to its pollinator(s). During 1990, natural variation in flowering time, display size, and fruit set were monitored in 508 plants at one locality in Puerto Rico. The following season, orchid floral abundance per host tree (Randia aculeata) was manipulated to investigate its effect on fruit set. Four floral abundance treatments were established (700, 500, 300, and 100), each replicated four times. Flowering time was the most important trait affecting fruit set. The proportion of plants setting at least one fruit was significantly high early and late in the season, but low during the flowering peak. Thus, strong disruptive selection differential on flowering phenology was found. Display size had little effect on fruit set. A weak, but significant disruptive selection differential on display size was found. Orchid floral abundance per host tree had a significant effect on fruit set. Early in the season, T. variegata flowers with intermediate number of conspecific flowers exhibited a greater probability of setting fruit than those in host trees with fewer or more flowers. Our results show that flowering phenology may be evolutionarily unstable, possibly a consequence of the deception pollination system. Furthermore, a deception strategy would be relatively unsuccessful in populations where plants are found in either very dense or sparse patches.     

Growth kinetics of a bacteriophage in continuous culture

Lytic coliphage Qbeta was grown in continuously cultured host bacteria using a cascade of stirred flow reactors. The apparatus was constructed so that the steady stream of exponentially growing bacterial cells passing through the stirred flow reactors served to prevent coevolution brought about by host-parasite interactions. Wall growth was the primary cause for deviation from ideal continuous culture conditions and is largely dependent on the surface structure of the host bacteria. Using an Escherichia coli strain deficient in adhesive type I pili expression, the desynchronization of single burst events could easily be followed over the course of four infection latency periods. Computer simulations based on a two-stage model for the Qbeta infection cycle were in perfect agreement with the experimental data. Applications of the optimized system to strategies of molecular evolution are discussed. (c) 1996 John Wiley & Sons, Inc.     

Development of human monoclonal antibodies: A review

This article describes the current status in the development of human monoclonal antibodies. Over the last ten years a lot of information about the human immune system has emerged. Combining these with the many new (bio-)technologies it is plausible that the long awaited breakthrough of this technology is close. This paper focuses on the classical cell-biological methods of achieving stable, antibody-producing human cell lines via cell fusion methods or virus derived transformations of human B-lymphocytes, as well as genetic engineering methods e.g. DNA libraries or phage display technology. The available in vitro immunization methods are critically reviewed and their impact on this topic is discussed. Therapeutic applications for cancer treatment or passive immunization against infectious diseases with antibodies derived by both ways are also reviewed.     

Anchor-linked intermediates in peptide amide synthesis are caused by dimeric anchors on the solid supports

Cleavage and kinetic studies have been carried out using commercially obtained H-Tyr(tBu)-5-(4′-aminomethyl-3′,5′-dimethoxyphenoxy)valeric acid-TentaGelS (H-Tyr(tBu)-4-ADPV-TentaGelS) and H-Tyr (tBu)-4-ADPV-Ala-aminomethyl-resin (H-Tyr(tBu)-4-ADPV-AM-resin) prepared from commercially available resin and loaded with commercially available Fmoc-4-ADPV-OH amide anchor. Cleavage with pure trifluoroacetic acid (TFA) gave the intermediate H-Tyr-4-ADPV-NH₂, which was then degraded to H-Tyr-NH₂, and cleavage with TFA/dichloromethane (1:9) yielded H-Tyr-4-ADPV-NH₂ which could be isolated in preparative amounts. Cleavage reactions with ¹⁵N-labelled H-Ala-4-ADPV-[¹⁵N]-Gly-AM-resin yielded the intermediate H-Ala-4-ADPV-NH₂, which contained no ¹⁵N as demonstrated by ¹H-NMR. The analysis of the commercial Fmoc-4-ADPV-OH amide anchor showed the presence of Fmoc-4-ADPV-4-ADPV-OH as an impurity in high amounts. This dimeric anchor molecule is the cause of formation of the anchor-linked peptide intermediate obtained during the cleavage from the resin. The particularly high acid-lability of the amide bond between the two ADPV moieties was utilized to synthesize sidechain and C-terminally 4-ADPV protected pentagastrin on a double-anchor resin, and to cleave it using 5% trifluoroacetic acid in dichloromethane. This method may offer a new way for the synthesis of protected peptide amides with improved solubility to be used in fragment condensation.     

Comparison of axonemal proteins from two kinds of Tetrahymena. I. Different characteristics of dyneins in heat stability

Tetrahymena thermophila could still swim after incubation of the cell body at 40°C for 30 min, whereas Tetrahymena pyriformis did not show any motility after the treatment. Turbidity measurements revealed that axonemes of T. pyriformis lost ATP-dependent sliding activity by the heat treatment, whereas those of T. thermophilia still had the activity under the same conditions. In connection with this difference in susceptibility to high temperature, the biochemical characteristics of dyneins were compared between the two species of Tetrahymena. Axonemal dyneins from the two species had significant vanadate-sensitive ATPase activity even after the heat treatment. Native gel electrophoresis and the following two-dimensional electrophoresis showed that the outer arm dynein of T. thermophilia is more stable in maintaining native configuration than that of T. pyriformis against the heat treatment, although both treated dyneins keep three (α, β and γ) subunits. Analysis by peptide mapping demonstrated that β- and γ-subunits of the outer arm dynein are considerably different in amino acid sequences between the two species. These results imply that dynein of T. thermophilia changed their amino acid sequences and biochemical characteristics to adapt to high temperature.     

The biotechnology and applications of antibody engineering

The exquisite specificity of monoclonal antibodies (MAb) has long provided the potential for creating new reagents for the in vivo delivery of therapeutic drugs or toxins to defined cellular target sites or improved methods of diagnosis. However, many difficulties associated with their production, affinity, specificity, and use in vivo have largely confined their application to research or in vitro diagnostics. This situation is beginning to change with the recent developments in the applied molecular techniques that allow the engineering of the genes that encode antibodies rather than the manipulation of the intact antibodies themselves. Techniques, such as the polymerase chain reaction, have provided essential methods with which to generate and modify the genetic constituents of antibodies, allow their conjugation to toxins or drugs, provide ways of humanizing murine antibodies, and allow discrete modular antigen binding components to be produced. More recent developments of in vitro expression systems and powerful phage surface display technologies will without doubt play a major role in future antibody engineering and in the successful development of new diagnostic and therapeutic antibody-based reagents.     

Side reactions in the synthesis of phosphotyrosine-containing peptides

Summary A series of phosphopeptides Tyr(PO₃H₂)-Val-Pro-Xxx-Leu (Xxx=Met, Met(O), Nle, Dab or Cys), derived from the native platelet-derived growth factor- receptor (PDGF-) sequence, has been prepared to study their interaction with the src-homology 2 (SH2) domains of the p85 subunit of PI3 kinase. The phosphopeptides were synthesized using Fmoc methodology incorporating N-Boc dibenzyl-protected phosphotyrosine (Boc-Tyr[PO₃(Bzl)₂]) as the N-terminal amino acid, since the benzyl groups can be removed during resin cleavage with TFA. Only peptides containing methionine were found to exist partially as S-benzyl sulfonium salts after TFA cleavage from the resin. The desired peptide could be obtained from the S-benzyl sulfonium salt by hydrogenolysis.     

A facile method to prepare C-terminal fluorescently labelled peptides by an Fmoc strategy

Summary Spectrophotometric peptide probes, derivatized at the C-terminus, are conveniently prepared by means of an Fmoc solid-phase strategy. Using a resin such as Sasrin, the fully protected peptide can be cleaved from the resin with hydrazine, yielding the protected peptide-hydrazide which is subsequently oxidized to the azide. An amino-containing chromophore or fluorophore such as 5-[(2-aminoethyl)-amino]-naphthalene sulfonic acid (EDANS) can be coupled directly to this activated carboxyl group. This allows for specific placement of the fluorophore at the C-terminal carboxyl group in the presence of trifunctional amino acids.