Electrically tunable organic bioelectronics for spatial and temporal manipulation of neuron-like pheochromocytoma (PC-12) cells

Background

Organic bioelectronic devices consisting of alternating poly(3,4-ethylenedioxythiophene) (PEDOT) and reduced graphite oxide (rGO) striped microelectrode arrays were fabricated by lithography technology. It has been demonstrated that the organic bioelectronic devices can be used to spatially and temporally manipulate the location and proliferation of the neuron-like pheochromocytoma cells (PC-12 cells).

Methods

By coating an electrically labile contact repulsion layer of poly(l-lysine-graft-ethylene glycol) (PLL-g-PEG) on the PEDOT electrode, the location and polarity of the PC-12 cells were confined to the rGO electrodes.

Results

The outgrowth of spatially confined bipolar neurites was found to align along the direction of the 20 μm wide electrode. The location of the PC-12 cells can also be manipulated temporally by applying electrical stimulation during the neurite differentiation of PC-12 cells, allowing the PC-12 cells to cross over the boundary between the PEDOT and the rGO regions and construct neurite networks in an unconfined manner where the contact repulsive coating of PLL-g-PEG was removed.

Conclusions

This adsorption and desorption of the PLL-g-PEG without and with electrical stimulation can be attributed to the tunable surface properties of the PEDOT microelectrodes, whose surface charge can switch from being negative to positive under electrical stimulation.

General significance

The electrically tunable organic bioelectronics reported here could potentially be applied to tissue engineering related to the development and regeneration of mammalian nervous systems. The spatial and temporal control in this device would also be used to study the synapse junctions of neuron–neuron contacts in both time and space domains. This article is part of a Special Issue entitled Organic Bioelectronics — Novel Applications in Biomedicine.     

Land use legacies in post-agricultural forests in the Doupovské Mountains,Czech Republic

Questions: Do differences in previous land use cause long-lasting changes in soil chemistry? Is vegetation composition affected by the previous land use after 50 years of secondary succession? Is the effect of previous land use caused by pre-existing differences in environmental conditions or mediated through changes in soil chemistry? How important is the effect of previous land use in relation to other factors? Location: Doupovské Mountains, Czech Republic. Methods: A stratified random sampling design was used to collect 91 vegetation relevés with accompanying soil samples. The effects of previous land use (arable field, meadow, pasture) on soil pH, organic carbon (C), total nitrogen (N), C:N ratio and available phosphorus were tested by an analysis of covariance. A canonical correspondence analysis and variation partitioning procedure were used to reveal relationships among previous land use, environmental factors and species composition. Results: Organic C, total N and C:N ratio were significantly influenced by previous land use, while available phosphorus and soil pH were not. Previous land use explained a significant part of the variation in species composition and its effects only partly overlapped with the effects of soil chemistry and terrain attributes. However, the species composition of post-agricultural forests was mostly determined by environmental factors not modified by previous land use. Conclusions: Forest communities that originate on abandoned agricultural land are primarily determined by natural environmental conditions. Nevertheless, the type of previous land use also modifies the species assemblages of these forests and needs to be considered as an important determinant of their composition.     

Assessing amendment properties of digestate by studying the organic matter composition and the degree of biological stability during the anaerobic digestion of the organic fraction of MSW

The transformation of organic matter during anaerobic digestion of mixtures of energetic crops, cow slurry, agro-industrial waste and organic fraction of municipal solid waste (OFMSW) was studied by analysing different samples at diverse points during the anaerobic digestion process in a full-scale plant. Both chemical (fiber analysis) and spectroscopic approaches (¹³C CPMAS NMR) indicated the anaerobic digestion process proceeded by degradation of more labile fraction (e.g. carbohydrate-like molecules) and concentration of more recalcitrant molecules (lignin and non-hydrolysable lipids). These modifications determined a higher degree of biological stability of digestate with respect to the starting mixture, as suggested, also, by the good correlations found between the cumulative oxygen uptake (OD₂₀), and the sum of (cellulose + hemicellulose + cell soluble) contents of biomasses detected by fiber analysis (r = 0.99; P < 0.05), and both O–alkyl-C (r = 0.98; P < 0.05) and alkyl-C (r = −0.99; P < 0.05) measured by ¹³C CPMAS NMR.     

Investigation of soluble microbial products in a full-scale UASB reactor running at low organic loading rate

Investigation on a full-scale UASB treating industrial wastewater at a low organic loading rate (OLR) was conducted. Excellent treatment performance was achieved when treating the evaporator condensate of distillery wastewater at the OLR of less than 1 kg COD/m³ d. Anaerobic effluent could be discharged without further treatment, which saved energy and running cost considerably. GC–MS analysis showed that the soluble microbial products (SMPs) were decreased to a low level at the low OLR. The main SMP in the anaerobic effluent were long chain carbohydrates and esters, accounting for 55–65% of the total organic matters. Anaerobic SMP was more complex than the aerobic ones.     

Tidal effects on the organic carbon mineralization rate under aerobic conditions in sediments of an intertidal estuary

Laboratory experiments and field measurements were conducted to examine the effect of tide on the organic carbon mineralization rate in sediments under aerobic conditions of an intertidal estuary. Core samples of surface sediments were collected from an intertidal estuary of the Kurose River, Hiroshima, Japan. To mimic low and high tide in the intertidal estuary, organic carbon mineralization rates in the samples were measured in the laboratory under both air-exposed and submerged conditions. Mineralization rates under air-exposed conditions were two to five times higher than those under submerged conditions. Field measurements of the rate of CO₂ emission from the sediment surface revealed a rapid increase in the rate as the sea level fell during ebb tide. The estimated amount of daily organic carbon mineralization assuming a constantly submerged condition was 30% less than that estimated when considering the semi-diurnal fluctuation in sea level. These results indicate that tide has a marked impact on the organic carbon mineralization rate in sediments under aerobic conditions on an intertidal estuary, and tidal effects need to be considered when the amount of mineralized organic carbon is estimated.     

The content of total sulphur and sulphur forms in birch (Betula pendula Roth) leaves in the air-polluted Krusne hory mountains

In leaves of birch (Betula pendula Roth), changes in the content of total sulphur and its inorganic and organic forms were determined in relation to the decreasing air-pollution load (SO₂) in the air-polluted Krusne hory mountains and the Decin sandstone highlands in 1995, 1998, 2001 and 2004. Results have shown that birch is able to use considerable amounts of sulphur taken through leaves from air-pollution load. Birch responds fast to changes in air-pollution load by fall in the content of total and inorganic forms of sulphur in leaves.     

侵蚀泥沙、有机质和全氮富集规律研究

在自然降雨下,研究降雨,坡度,耕作和施肥对侵蚀泥沙,有机质和全N富集率的影响,分析土壤和泥沙颗粒组成,富集与泥沙有机质和全N富集的关系,揭示土壤有机质和全N在泥沙中的富集规律,结果表明,泥沙粘粒的富集导致有机质和全N的富集,泥沙粘粒,有机质和全N富集率分别平均为1．77,2．09和1．61,土壤侵蚀模数与泥沙有机质和全N富集率呈显著的负相关关系,降雨,坡度,施肥和耕作措施对泥沙有机质富集作用的影响通过减少土壤侵蚀模数来实现的,减少土壤侵蚀的措施可增加泥沙有机质和全N的富集。     

Hybrid solar cells

Historically, conventional solar cells were built from inorganic materials such as silicon. Although the efficiency of such conventional solar cells is high, very expensive materials and energy intensive processing techniques are required.Hybrid and photoelectrochemical (dye sensitized) solar cells have been the cheap alternatives for conventional silicon solar cells. A hybrid solar cell consists of a combination of both organic and inorganic materials therefore, combines the unique properties of inorganic semiconductors with the film forming properties of the conjugated polymers. Organic materials are inexpensive, easily processable and their functionality can be tailored by molecular design and chemical synthesis. On the other hand, inorganic semiconductors can be manufactured as nanoparticles and inorganic semiconductor nanoparticles offer the advantage of having high absorption coefficients and size tunability. By varying the size of the nanoparticles the bandgap can be tuned therefore the absorption range can be tailored.In this short review, we will focus on the concepts of organic/inorganic “hybrid” solar cells.     

Nitrification and organic nitrogen formation in soils

Summary The formation of mineral nitrogen species and of organic nitrogen was studied in three different types of soils in relation to the application of the nitrification inhibitor nitrapyrin. The results indicate that nitrification brings about a deficit in total mineral nitrogen and a concomitant surplus in non biomass organic nitrogen. This phenomenon increases with increasing levels of applied ammonium nitrogen and soil organic matter. The phenomenon is considered to be due to the reaction of the transient nitrite formed with soil phenolic compounds and appears to be of significance in all soils in which nitrification occurs, even neutral to alkaline and low carbon soils.