Automated carboxy-terminal sequence analysis of peptides.

Proteins and peptides can be sequenced from the carboxy-terminus with isothiocyanate reagents to produce amino acid thiohydantoin derivatives. Previous studies in our laboratory have focused on solution phase conditions for formation of the peptidylthiohydantoins with trimethylsilylisothiocyanate (TMS-ITC) and for hydrolysis of these peptidylthiohydantoins into an amino acid thiohydantoin derivative and a new shortened peptide capable of continued degradation (Bailey, J. M. & Shively, J. E., 1990, Biochemistry 29, 3145-3156). The current study is a continuation of this work and describes the construction of an instrument for automated C-terminal sequencing, the application of the thiocyanate chemistry to peptides covalently coupled to a novel polyethylene solid support (Shenoy, N. R., Bailey, J. M., & Shively, J. E., 1992, Protein Sci. I, 58-67), the use of sodium trimethylsilanolate as a novel reagent for the specific cleavage of the derivatized C-terminal amino acid, and the development of methodology to sequence through the difficult amino acid, aspartate. Automated programs are described for the C-terminal sequencing of peptides covalently attached to carboxylic acid-modified polyethylene. The chemistry involves activation with acetic anhydride, derivatization with TMS-ITC, and cleavage of the derivatized C-terminal amino acid with sodium trimethylsilanolate. The thiohydantoin amino acid is identified by on-line high performance liquid chromatography using a Phenomenex Ultracarb 5 ODS(30) column and a triethylamine/phosphoric acid buffer system containing pentanesulfonic acid. The generality of our automated C-terminal sequencing methodology was examined by sequencing model peptides containing all 20 of the common amino acids. All of the amino acids were found to sequence in high yield (90% or greater) except for asparagine and aspartate, which could be only partially removed, and proline, which was found not be capable of derivatization. In spite of these current limitations, the methodology should be a valuable new tool for the C-terminal sequence analysis of peptides.     

Carboxylic acid-modified polyethylene: a novel support for the covalent immobilization of polypeptides for C-terminal sequencing.

We have developed a method for the covalent immobilization of peptides, for the purpose of C-terminal sequencing, to a novel solid support, carboxylic acid-modified polyethylene (PE-COOH) film. The peptides are attached by coupling the N-terminal amino group to the activated carboxyl groups of the film. Reagents for carboxyl group activation, including 1,3-dicyclohexylcarbodiimide (DCC), 1,1'-carbonyldiimidazole (CDI), 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC), benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate (BOP), and 1,3-diisopropylcarbodiimide (DICD) were compared. The best yields were obtained with DCC for a variety of tested peptides and averaged approximately 50%. The covalent attachment at pH 6.7 of peptides was shown to occur predominantly thorough the alpha-amino group for the peptide, SIGSLAK, which after attachment to the PE-COOH support permitted the C-terminal lysine residue to be sequenced in good yield, indicating that the epsilon-amino group of lysine is not covalently attached. This support offers a number of advantages over other solid supports, such as silica and polyvinylidene difluoride, for C-terminal sequencing including (1) stability to base and the high temperatures (65 degrees C) employed for C-terminal sequencing, (2) wettability with both aqueous and organic solvents, (3) a high capacity (1.6 nmol/mm2) for covalent coupling of polypeptides, and (4) easy divisibility into 1 x 5-mm pieces for use in our continuous flow reactor (CFR), which is also used for automated N-terminal sequencing (Shively, J.E., Miller, P., & Ronk, M., 1987, Anal. Biochem. 163, 517-529). Automated C-terminal sequencing on these supports is described in the companion paper (Bailey, J.M., Shenoy, N.R., Ronk, M., & Shively, J.E., 1992, Protein Sci. 1, 68-80).     

Cloning and sequence analyses of cDNAs encoding vasotocin and isotocin precursors of chum salmon,Oncorhynchus keta: evolutionary relationships of neurohypophysial hormone precursors

Summary The nucleotide sequences of cloned cDNAs were used to determine the primary structures of the precursors of vasotocin (sVT) and isotocin (sIT) from the hypothalamus of the chum salmon,Oncorhynchus keta. Two different cDNAs were obtained for each of sVT and sIT precursors (sVT-I and sVT-II; sIT-I and sIT-II). Both sVT and sIT precursors were found to contain a signal peptide and hormone that is connected to a neurophysin by a Gly-Lys-Arg sequence. Northern and Southern blot analyses showed that the sVT and sIT genes are expressed by the same chum salmon hypothalamus, but not by the liver and kidney. Microheterogeneity was found in the nucleotide and amino acid sequences of sVT precursors between our results and the previously reported data (Heierhorst et al. 1990). The conspicuous difference is the occurrence of a stop codon in the middle of sVT-II cDNA. The carboxyl termini of both sVT and sIT neurophysins are about 30 amino acids longer than neurophysins of toad and mammalian neurohypophysial hormone precursors. Although these extended regions do not contain a glycosylation site, they show striking similarity with the glycopeptide moiety (copeptin) of toad vasotocin and mammalian vasopressin precursors. The central portion of the neurophysins shows highest homology among corresponding regions of sVT and sIT precursors. Moreover, calculation of nucleotide substitution rates suggests that a recent gene conversion may have occurred which encompasses the exon that encodes the central segment of the sVT and sIT precursors. A possible pathway for the evolution of precursor molecules of neurohypophysial hormones is discussed.Abbreviations AVP vasopressin - C carboxyl - h human - IT isotocin - MT mesotocin - N amino - OXT oxytocin - S chum salmon - SDS sodium dodecyl sulfate - t toad - VT vasotocin     

Association of Lps gene with natural resistance of mouse macrophages against Legionella pneumophila

We have cloned a 1.6-kb region of chromosomal DNA from Thermoplasma acidophilum into Escherichia coli using as a probe part of the Methanococcus vannielii fus-gene. The sequence of the clone was highly homologous to part of the corresponding Methanococcus vannielii gene. By chromosome walking, a 4.7-kb EcoRI fragment containing the complete gene was isolated. Nucleotide sequencing revealed an open reading frame of 2196 nucleotides. The deduced amino acid sequence contains the known peptide sequence around the ADP-ribosylation site of T. acidophilum elongation factor 2, which unequivocally confirms that the fus-gene has been cloned. The amino acid sequence was compared to that of hamster and E. coli, as well as to known archaebacterial EF-2 sequences.     

Studies on well-coupled Photosystem I-enriched subchloroplast vesicles — energy-dependent switching between two different active states of the proton-translocation adenosine triphosphatase

Single-turnover flash-induced ATP synthesis coupled to natural cyclic electron flow in Photosystem I-enriched subchloroplast vesicles (from spinach) was continuously followed by the luciferin-luciferase luminescence. The ATP yield per flash was maximal (1 ATP per s per 1000 Chl) around a flash frequency of 0.5–2 Hz. It decreased both at lower and higher flash frequencies. The decrease at high flash frequency was due to limitation by the electron-transfer rate, while the decrease at low flash frequency was directly due to intrinsic properties of the ATPase itself. Carbonylcyanide-p-trifluoromethoxyphenylhydrazone (FCCP) decreased the yield at low frequency more than at high frequency. The same behaviour was observed if electron transfer was artificially mediated by pyocyanin. If the ADP concentration was increased from 40 to at least 80 μM, or if the vesicles were preincubated with 5 mM dithiothreitol (DTT), the decrease of the yield at flash frequencies below 0.5 Hz was no longer observed. Incubation with DTT increased the rates of ATP hydrolysis and synthesis at any flash frequency. The decrease of the yield could be elicited again by addition of 50 nM FCCP. It is concluded that at low levels of the protonmotive force (Δ gm_H⁺), the ATPase is converted into an active ATP-hydrolyzing state in which ATP synthesis activity is decreased due to a decreased affinity towards ADP and/or to a decreased release of newly synthesized ATP, that can be cancelled by increasing the ADP concentration or by addition of DTT in the absence of uncoupler.     

Molecular evolution of the carbonic anhydrase genes: Calculation of divergence time for mouse carbonic anhydrase I and II

Summary A cDNA clone in pBR322 that cross-hybridizes with a mouse carbonic anhydrase form II (CAII) probe has been sequenced and identified as mouse carbonic anhydrase form I (CAI). The 1224-base-pair clone encodes the entire 260-amino-acid protein and appears to contain an Alu-like element in the 3 untranslated region. The deduced amino acid sequence exhibits 77% homology to human CAI and contains 17 of the 20 residues that are considered unique to and invariant for all mammalian CAI isozymes. The results of a detailed comparison of the nucleic acid sequences spanning the coding regions of mouse CAI and rabbit CAI have been used to calibrate an evolutionary clock for the carbonic anhydrases (CAs). These data have been applied to a comparison of the mouse CAI and CAII nucleic acid sequences to calculate the divergence time between the two genes. The divergence-time calculation provides the first estimation of the evolutionary relationship between CAs based entirely on nucleotide sequence comparison.     

The number of nucleotides required to determine the branching order of three species,with special reference to the human-chimpanzee-gorilla divergence

Summary A mathematical theory for computing the probabilities of various nucleotide configurations among related species is developed, and the probability of obtaining the correct tree (topology) from nucleotide sequence data is evaluated using models of evolutionary trees that are close to the tree of mitochondrial DNAs from human, chimpanzee, gorilla, orangutan, and gibbon. Special attention is given to the number of nucleotides required to resolve the branching order among the three most closely related organisms (human, chimpanzee, and gorilla). If the extent of DNA divergence is close to that obtained by Brown et al. for mitochondrial DNA and if sequence data are available only for the three most closely related organisms, the number of nucleotides (m^*) required to obtain the correct tree with a probability of 95% is about 4700. If sequence data for two outgroup species (orangutan and gibbon) are available, m^* becomes about 2600–2700 when the transformed distance, distance-Wagner, maximum parsimony, or compatibility method is used. In the unweighted pair-group method, m^* is not affected by the availability of data from outgroup species. When these five different tree-making methods, as well as Fitch and Margoliash's method, are applied to the mitochondrial DNA data (1834 bp) obtained by Brown et al. and by Hixson and Brown, they all give the same phylogenetic tree, in which human and chimpanzee are most closely related. However, the trees considered here are gene trees, and to obtain the correct species tree, sequence data for several independent loci must be used.     

Nucleotide sequence and evolution of the orangutan ε globin gene region and surrounding Alu repeats

Summary We have mapped and sequenced the globin gene and seven surrounding Alu repeat sequences in the orangutan globin gene cluster and have compared these and other orangutan sequences to orthologously related human sequences. Noncoding flanking and intron sequences, synonymous sites of , , and globin coding regions, and Alu sequences in human and orangutan diverge by 3.2%, 2.7%, and 3.7%, respectively. These values compare to 3.6% from DNA hybridizations and 3.4% from the globin gene region. If as suggested by fossil evidence and molecular clock calculations, human and orangutan lineages diverged about 10–15 MYA, the rate of noncoding DNA evolution in the two species is 1.0–1.5×10^–9 substitutions per site per year. We found no evidence for either the addition or deletion of Alu sequences from the globin gene cluster nor is there any evidence for recent concerted evolution among the Alu sequences examined. Both phylogenetic and phenetic distance analyses suggest that Alu sequences within the and globin gene clusters arose close to the time of simian and prosimian primate divergence (about 50–60 MYA). We conclude that Alu sequences have been evolving at the rate typical of noncoding DNA for the majority of primate history.Presented at the FEBS Symposium on Genome Organization and Evolution, held in Crete, Greece, September 1–5, 1986     

Isolation and Sequencing of a Genomic Clone for Mouse Brain Specific Small RNA

We isolated a mouse genomic clone that hybridized with small RNA present in the cytoplasm of the brain. The RNA was about 150 nucleotides long. This RNA seemed to be specific to the brain, since it was not found in the liver or kidney. The clone DNA contained a sequence homologous to 82-nucleotide "identifier" core sequence of cDNA clones of rat. The sequence contained a split promoter for RNA polymerase III and was flanked by a 12-nucleotide direct repeat (ATAAATAATTTA).     

Identification of Tn4430, a transposon of Bacillus thuringiensis functional in Escherichia coli

Summary The mobile genetic element Tn4430, originating from the gram-positive bacterium, Bacillus thuringiensis, and previously described as the Th-sequence, is the first transposon isolated from the genus Bacillus. In the present work a gene (APH-III) conferring resistance to kanamycin was inserted into this 4.2 kb transposon. Transposition experiments showed that Tn4430APH-III could transpose in the gram-negative host Escherichia coli when its insertion functions were supplied by an intact copy of Tn4430. By transposing Tn4430APH-III directly onto pBR322, it was possible to determine the nucleotide sequence of the terminal inverted repeats of Tn4430 and of the target DNA site. Identical 38 bp in inverted orientation are situated at each end of the transposon and there is a direct duplication of 5 bp at the insertion site. Thus, it is clear that Tn4430 is closely related to the transposons belonging to the Tn3 family (class II elements).