The long periodicity phase (LPP) controversy part I: The influence of a natural-like ratio of the CER[EOS] analogue [EOS]-br in a CER[NP]/[AP] based stratum corneum modelling system: A neutron diffraction study

This study used neutron diffraction to investigate a ceramide-[NP] C24/[AP] C24 /[EOS]-br C30/cholesterol/lignoceric acid (0.6: 0.3: 0.1: 0.7: 1) based stratum corneum modelling system. By adding specifically deuterated ceramides-[NP]-D₃, [AP]-D₃, and [EOS]-br-D₃, detailed information on the lamellar and the nanostructure of the system was obtained. For the short periodicity phase a natural-like lamellar repeat distance of 5.47?±?0.02?nm was observed, similar to the [NP]/[AP] base system without the [EOS]-br. Unlike in this system the ceramides here were slightly tilted, hinting towards a slightly less natural arrangement. Due to the deuteration it was possible to observe that the long ceramide chains were overlapping in the lamellar mid-plane. This is considered to be an important feature for the natural stratum corneum. Despite the presence of a ceramide [EOS] analogue – able to form a long phase arrangement – no distinct long periodicity phase was formed, despite a slightly higher than natural ω-acyl ceramide ratio of 10?mol%. The deuterated variant of this ceramide determined that the very long ceramide was integrated into the short periodicity phase, spanning multiple layers instead. The – compared to the base system – unchanged repeat distance highlights the stability of this structure. Furthermore, the localisation of the very long ceramide in the short periodicity phase indicates the possibility of a crosslinking effect and thus a multilayer stabilizing role for the ceramide [EOS]. It can be concluded, that additionally to the mere presence of ceramide-[EOS] more complex conditions have to be met in order to form this long phase. This has to be further investigated in the future.     

Polymorphic phase behaviour of dilinoleoylphosphatidylethanolamine and palmitoyloleoylphosphatidylcholine mixtures: Structural changes between hexagonal,cubic and bilayer phases

The polymorphic phase behaviour of dilinoleoylphosphatidyethanolamine (DLPE) and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) is investigated by freeze-fracture electron microscopy, X-ray diffraction and ³¹P-NMR. The structures at 5% or less POPC are predominantly inverted hexagonal (H_II), whereas at 15% or more POPC, the structure is mostly bilayer (L), interrupted by defects (lipidic particles). A cubic phase structure is observed in the transition range between H and L phases; the cubic arrangement deteriorates at higher temperatures into an amorphous aggregate of spherical units. Both cubic and amorphous structures contribute to the isotropic ³¹P resonance, with no preference for PC or PE partitioning in the isotropic motion as observed by high resolution NMR. The existence of the cubic phase seems to depend critially on the homogeneity and the degree unsaturation of the phospholipids.     

Proteins of the Bacillus stearothermophilus ribosome: Crystallization of protein L6

Crystals of ribosomal protein L6 from Bacillus stearothermophilus suitable for high resolution structural studies have been obtained. Crystals are hexagonal with space group P6₁22 (or the enantiomorph P6₅22) and cell dimensions a = b = 72.7 Å, c = 124.9 Å. A search for heavy atom derivatives is in progress.     

Starch in prasinophycean algae

Reserve products isolated from three species of prasinophycean algae: Pyramimonas parkeae Norris and Pearson, Pyramimonas amylifera Conrad and Platymonas tetrathele West were compared. Three pieces of experimental evidence indicate that the reserve product of each of the species analyzed is a true starch. (I) There is no essential difference between the light absorption curve for the complex formed between corn starch and iodine and the corresponding curves for the algal products. (2) The β-amylase breakdown limit of these compounds is very close to that of corn starch. (3) The X-ray diffraction diagrams produced by the reserve material from Pyramimonas parkeae and Platymonas tetrathele is a so-called A-spectrum characteristic of cereal starches while the diagram produced by grains from Pyramimonas amylifera corresponds to the B-spectrum typical for tuber starches. The dissimilarity between the X-ray diagrams produced by the starches from the Pyramimonas species suggests that a re-examination of the taxonomy of these species is warranted.     

The Application of Electron Backscatter Diffraction on Halide Perovskite Materials

Recently, the application of electron backscatter diffraction (EBSD) in halide perovskites has enabled the correlation of the micro‐structural arrangement of polycrystalline grains with other properties (optical, electrical, mechanical, and chemical) in a “pixel‐by‐pixel” approach. Most studies so far have used an ultra‐sensitive electron beam detector that has sensitivity thousands of times higher than a traditional scintillator screen and charge coupled device camera, enabling much lower beam currents. An alternative approach has been the use of low vacuum measurement conditions to avoid charge buildup that leads to damage. This review focuses on introducing the classical EBSD technique to the halide perovskite community, where it has been highly underutilized due to beaminduced damage in these relatively unstable materials. Recent research is used to dispel some common misconceptions about grain boundaries in halide perovskites and highlight what has been learned by comparing and correlating EBSD with other techniques. Additionally, the remaining limitations, development challenges, and future of the EBSD technique for halide perovskites are discussed. Successful utilization of the EBSD technique as a common characterization tool in the halide perovskite community will enable scientists and engineers to develop maps of cross correlated properties, helping to unlock the full potential of this complex material system.     

The impact of high hydrostatic pressure on structure and dynamics of β-lactoglobulin

Methods

Combining small-angle X-ray and neutron scattering measurements with inelastic neutron scattering experiments, we investigated the impact of high hydrostatic pressure on the structure and dynamics of β-lactoglobulin (βLG) in aqueous solution.

Background

βLG is a relatively small protein, which is predominantly dimeric in physiological conditions, but dissociates to monomer below about pH 3.

Results

High-pressure structural results show that the dimer–monomer equilibrium, as well as the protein–protein interactions, are only slightly perturbed by pressure, and βLG unfolding is observed above a threshold value of 3000 bar. In the same range of pressure, dynamical results put in evidence a slowing down of the protein dynamics in the picosecond timescale and a loss of rigidity of the βLG structure. This dynamical behavior can be related to the onset of unfolding processes, probably promoted from water penetration in the hydrophobic cavity.

General significance

Results suggest that density and compressibility of water molecules in contact with the protein are key parameters to regulate the protein flexibility.     

Enantioselective Synthesis and Antimicrobial Activities of Tetrahydro‐Β‐Carboline Diketopiperazines

A series of single isomers tetrahydro‐β‐carboline diketopiperazines were stereoselectively synthesized starting from l ‐tryptophan methyl ester hydrochloride and six aldehydes through a four‐step reaction including Pictet‐Spengler reaction, crystallization‐induced asymmetric transformations (CIAT), Schotten‐Baumann reaction, and intramolecular ester amidation. The chemical structures were characterized by nuclear magnetic resonance (NMR) and elemental analysis, among which two compounds were determined by x‐ray single crystal diffraction. Moreover, antimicrobial activities of all the compounds were also tested. Chirality 25:656–662, 2013. © 2013 Wiley Periodicals, Inc.     

Preparation and in vitro evaluation of xanthan gum facilitated superabsorbent polymeric microspheres

Interpenetrating polymer network (IPN) hydrogel microspheres of xanthan gum (XG) based superabsorbent polymer (SAP) and poly(vinyl alcohol) (PVA) were prepared by water-in-oil (w/o) emulsion crosslinking method for sustained release of ciprofloxacin hydrochloride (CIPRO). The microspheres were prepared with various ratios of hydrolyzed SAP to PVA and extent of crosslinking density. The prepared microspheres with loose and rigid surfaces were evidenced by scanning electron microscope (SEM). Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis confirmed the IPN formation. Differential scanning calorimetry (DSC) study was performed to understand the dispersion nature of drug after encapsulation. The in vitro drug release study was extensively evaluated depending on the process variables in both acidic and alkaline media. All the formulations exhibited satisfactory physicochemical and in vitro release characteristics. Release data indicated a non-Fickian trend of drug release from the formulations. Based on the results, this study suggest that CIPRO loaded IPN microspheres were suitable for sustained release application.     

Formation of Covellite (CuS) Under Biological Sulfate-Reducing Conditions

Sulfate-reducing bacteria (SRB) play a major role in the precipitation of metal sulfides in the environment. In this work, biogenic copper sulfide formation was examined in cultures of SRB and compared to chemically initiated Cu sulfide precipitation as a reference system. Mixed cultures of SRB were incubated at 22, 45, and 60°C in nutrient solutions that contained copper sulfate. Abiotic reference samples were produced by reacting uninoculated liquid media with Na₂S solutions under otherwise identical conditions. Precipitates were collected anaerobically by centrifugation, frozen in liquid N₂, and freeze-dried, followed by analysis using X-ray diffraction (XRD), X-ray fluorescence, and scanning electron microscopy. Covellite (CuS) was the only mineral found in the precipitates. Covellite was less crystalline in the biogenic precipitates than in the abiotic samples based on XRD peak widths and peak to background ratios. Poor crystallinity may be the result of slower precipitation rates in bacterial cultures as compared to the abiotic reference systems. Furthermore, bacterial cells may inhibit the nucleation steps that lead to crystal formation. Incubation at elevated temperatures improved the crystallinity of the biotic specimens.