X-linked meiotic drive can boost population size and persistence

X-linked meiotic drivers cause X-bearing sperm to be produced in excess by male carriers, leading to female-biased sex ratios. Here, we find general conditions for the spread and fixation of X-linked alleles. Our conditions show that the spread of X-linked alleles depends on sex-specific selection and transmission rather than the time spent in each sex. Applying this logic to meiotic drive, we show that polymorphism is heavily dependent on sperm competition induced both by female and male mating behavior and the degree of compensation to gamete loss in the ejaculate size of drive males. We extend these evolutionary models to investigate the demographic consequences of biased sex ratios. Our results suggest driving X-alleles that invade and reach polymorphism (or fix and do not bias segregation excessively) will boost population size and persistence time by increasing population productivity, demonstrating the potential for selfish genetic elements to move sex ratios closer to the population-level optimum. However, when the spread of drive causes strong sex-ratio bias, it can lead to populations with so few males that females remain unmated, cannot produce offspring, and go extinct. This outcome is exacerbated when the male mating rate is low. We suggest that researchers should consider the potential for ecologically beneficial side effects of selfish genetic elements, especially in light of proposals to use meiotic drive for biological control.     

How sequence populations persist inside bacterial genomes

Compared to their eukaryotic counterparts, bacterial genomes are small and contain extremely tightly packed genes. Repetitive sequences are rare but not completely absent. One of the most common repeat families is REPINs. REPINs can replicate in the host genome and form populations that persist for millions of years. Here, we model the interactions of these intragenomic sequence populations with the bacterial host. We first confirm well-established results, in the presence and absence of horizontal gene transfer (hgt) sequence populations either expand until they drive the host to extinction or the sequence population gets purged from the genome. We then show that a sequence population can be stably maintained, when each individual sequence provides a benefit that decreases with increasing sequence population size. Maintaining a sequence population of stable size also requires the replication of the sequence population to be costly to the host, otherwise the sequence population size will increase indefinitely. Surprisingly, in regimes with high hgt rates, the benefit conferred by the sequence population does not have to exceed the damage it causes to its host. Our analyses provide a plausible scenario for the persistence of sequence populations in bacterial genomes. We also hypothesize a limited biologically relevant parameter range for the provided benefit, which can be tested in future experiments.     

畜禽钙磷和微量元素营养研究进展

矿物元素在畜禽生长发育、新陈代谢、神经活动、免疫功能、内分泌等几乎所有的生命活动过程中都发挥着重要的生理作用,分为钙、磷、钠、镁等常量元素和铁、锰、钴、铜等微量元素。某种矿物元素摄入不足或在体内过量蓄积、矿物元素间比例失调,都将引起严重后果。随着畜禽养殖业的集约化规模化发展,饲用矿物元素用量迅速增加,但存在不合理使用的情况,造成了资源浪费和环境污染。因此,在满足畜禽营养需要量的前提下,合理地使用矿物元素剂型及剂量,实现降低矿物元素经畜禽粪污向环境中的排放量,不仅利于集约化畜禽养殖业的发展,同时也能有效降低畜禽粪污中的重金属含量,为种植业提供优良的有机肥来源,维护生态系统的平衡,促进种植业和养殖业的可持续健康发展。基于此,以畜禽体内含量最高的常量元素钙磷和微量元素为切入点,介绍了饲用矿物元素的应用现状、畜禽矿物元素基础需要量及合适的添加范围,着重综述了新型饲用微量元素的开发与应用进展,并探讨了矿物元素动态饲喂模式的可行性及有效性,以期为合理利用矿物元素资源及进一步解决全球生态农业研究的畜禽矿物元素导致的环境污染提供参考。     

A multibody modelling approach to determine load sharing between passive elements of the lumbar spine

The human spinal segment is an inherently complex structure, a combination of flexible and semi-rigid articulating elements stabilised by seven principal ligaments. An understanding of how mechanical loading is shared among these passive elements of the segment is required to estimate tissue failure stresses. A 3D rigid body model of the complete lumbar spine has been developed to facilitate the prediction of load sharing across the passive elements. In contrast to previous multibody models, this model includes a non-linear, six degrees of freedom intervertebral disc, facet bony articulations and all spinal ligaments. Predictions of segmental kinematics and facet joint forces, in response to pure moment loading (flexion–extension), were compared to published in vitro data. On inclusion of detailed representation of the disc and facets, the multibody model fully captures the non-linear flexibility response of the spinal segment, i.e. coupled motions and a mobile instantaneous centre of rotation. Predicted facet joint forces corresponded well with reported values. For the loading case considered, the model predicted that the ligaments are the main stabilising elements within the physiological motion range; however, the disc resists a greater proportion of the applied load as the spine is fully flexed. In extension, the facets and capsular ligaments provide the principal resistance. Overall patterns of load distribution to the spinal ligaments are in agreement with previous predictions; however, the current model highlights the important role of the intraspinous ligament in flexion and the potentially high risk of failure. Several important refinements to the multibody modelling of the passive elements of the spine have been described, and such an enhanced passive model can be easily integrated into a full musculoskeletal model for the prediction of spinal loading for a variety of daily activities.     

Detailed finite element modelling of deep needle insertions into a soft tissue phantom using a cohesive approach

Detailed finite element modelling of needle insertions into soft tissue phantoms encounters difficulties of large deformations, high friction, contact loading and material failure. This paper demonstrates the use of cohesive elements in high-resolution finite element models to overcome some of the issues associated with these factors. Experiments are presented enabling extraction of the strain energy release rate during crack formation. Using data from these experiments, cohesive elements are calibrated and then implemented in models for validation of the needle insertion process. Successful modelling enables direct comparison of finite element and experimental force–displacement plots and energy distributions. Regions of crack creation, relaxation, cutting and full penetration are identified. By closing the loop between experiments and detailed finite element modelling, a methodology is established which will enable design modifications of a soft tissue probe that steers through complex mechanical interactions with the surrounding material.     

Bone remodelling analysis of a bovine femur for a veterinary implant design

The response of bovine bone to the presence of an implant is analysed with the aim of simulating bone remodelling in a developing model of a polymeric intramedullary interlocking nail for veterinary use. A 3-D finite element model of the femur diaphysis is built based on computed tomography images and using a CAD-based modelling pipeline. The bone remodelling process after the surgery is analysed and compared with the healthy bone. The remodelling law assumes that bone adapts to the mechanical environment. For the analyses a consistent set of loads is determined for the bovine walk cycle. The remodelling results reproduce the morphologic features of bone and provide evidence of the difference on the bone behaviour when comparing metallic and polymeric nails. Our findings indicate that an intramedullary polymeric nail has the advantage over the metallic one of improving long-term bone healing and possibly avoiding the need of the implant removal.     

Insights on the Behavior of Late Paleozoic Aquatic Crustaceans (Pygocephalomorpha?): Compound Trace Fossils from Western Argentina

We describe intergradations between the arthropod repichnial trace fossils Diplichnites gouldi (Gevers et al., 1971), Dendroidichnites Demathieu et al., 1992, and Monomorphichnus Crimes, 1970 with two distinct cubichnial traces, Gluckstadtella cooperi Savage, 1971 and Huilmuichnus santracruzensis new ichnogenus and ichnospecies. These compound ichnofossils are part of high ichnodiversity arthropod-dominated trace fossil associations from the Late Carboniferous Agua Escondida Formation of the San Rafael Basin (Argentina). The complex ichnotaxonomy of Diplichnites and the ichnospecies D. gouldi are discussed and some possible working solutions are proposed. The most likely producer of the compound trace fossils are the Pygocephalomorpha, a group of Late Paleozoic crustaceans that are recorded in nearby basins from Uruguay and Brazil. The compound trace fossils are used to infer a number of complex behaviors of pygocephalomorphs in a subaqueous setting, including caridoid (tail flip) or more primitive escape reactions, landing followed by resting and transient resting during normal walking. In addition, different gaits can be inferred from well-preserved D. gouldi, which can be correlated with contrasting trackway morphology.