城市污泥处理处置技术及资源化利用研究

城市污泥的产量巨大并且成分复杂,如何对城市污泥处置与利用已成为人们所关注的问题.污泥是有用的生物资源,如能合理利用则不仅能变废为宝,还能增加经济效益,所以,探讨适合我国国情的有效处理处置和利用污泥的技术具有重要的现实意义.本文对城市污泥的特性、国内外处理、处置技术和污泥资源化技术的现状进行了分析,认为对污泥进行资源化利用是符合我国国情的一种经济、有效的途径,污泥的资源化利用尤其是农业利用不但可以节省大量的污泥终端处置费用,更可以为肥力低下的农田增添有机质、提高肥力,促进农业生产发展、实现农业生态环境的良性循环.     

Strategies for PHA production by mixed cultures and renewable waste materials

Production of polyhydroxyalkanoates (PHA) by mixed cultures has been widely studied in the last decade. Storage of PHA by mixed microbial cultures occurs under transient conditions of carbon or oxygen availability, known respectively as aerobic dynamic feeding and anaerobic/aerobic process. In these processes, PHA-accumulating organisms, which are quite diverse in terms of phenotype, are selected by the dynamic operating conditions imposed to the reactor. The stability of these processes during long-time operation and the similarity of the polymer physical/chemical properties to the one produced by pure cultures were demonstrated. This process could be implemented at industrial scale, providing that some technological aspects are solved. This review summarizes the relevant research carried out with mixed cultures for PHA production, with main focus on the use of wastes or industrial surplus as feedstocks. Basic concepts, regarding the metabolism and microbiology, and technological approaches, with emphasis on the kind of feedstock and reactor operating conditions for culture selection and PHA accumulation, are described. Challenges for the process optimization are also discussed.     

不同风浪条件下太湖梅梁湾光合有效辐射的衰减

基于2003年7月12～17日在太湖梅梁湾进行的连续6d原位水下光场观测资料,分析了不同风浪条件下光合有效辐射(PAR)的衰减和真光层深度,探讨了影响水下光合有效辐射的主导因子.结果表明,整个观测期间向下PAR衰减系数为2.63～4.71·m^-1(均值为3.63±0.47·m^-1),对应的真光层深度为0.98～1.75m(均值为1.29±0.18m),显示1.5m以下深度浮游植物、沉水植物基本上无法获取足够的太阳光能进行光合作用.从小风浪到中风浪、大风浪向下PAR衰减系数分别是2.63、3.72和4.37·m^-1,衰减系数分别增加了41%、66%.透明度、PAR衰减系数、真光层深度与悬浮物浓度存在显著性线性相关,并且与悬浮物中无机颗粒物相关性最好,而与叶绿素a、脱镁叶绿素及溶解性有机碳相关性很低.多元逐步线性回归表明,叶绿素a和溶解性有机碳最先被剔除方程,说明在梅梁湾由于风浪扰动引起悬浮物浓度的改变是影响水下光场的主导因素.     

Whole cell‐catalyzed transesterification of waste vegetable oil

Enzymatic transesterification of waste cooking oil, comprising fats, oil and grease (FOG), to produce fatty acid methyl esters (FAME) i.e. biodiesel, was investigated using a novel strain of the fungus Aspergillus niger, immobilized as a whole‐cell biocatalyst. Response surface methodology (RSM), with a five‐level‐three‐factor central composite rotatable design, was used to optimize the reaction and analyze the relationship of reaction variables and their coinfluent on the response i.e. FAME yield. Independent variables that affect the transesterification reaction include temperature, feedstock water content and enzyme amount. Using RSM, a second‐order polynomial equation was derived for FAME yield using multiple regression analysis. The second‐order polynomial regression model was highly significant (P<0.001) in predicting the actual relationship between the response and the variables, where a linear relationship was apparent between observed and predicted values (R²=0.9651). In addition, the predicted determination coefficient q² i.e. 0.7723, also proved that the model has a high predictive ability. The validation experiments, under optimized conditions, showed that the predicted value of maximum FAME yield (i.e. 91.3%) was in close agreement with the experimental value (i.e. 91.8%).     

HS‐SPME‐GC‐FID method for detection and quantification of Bacillus cereus ATCC 10702 mediated 2‐acetyl‐1‐pyrroline

A rapid micro‐scale solid‐phase micro‐extraction (SPME) procedure coupled with gas‐chromatography with flame ionized detector (GC‐FID) was used to extract parts per billion levels of a principle basmati aroma compound “2‐acetyl‐1‐pyrroline” (2‐AP) from bacterial samples. In present investigation, optimization parameters of bacterial incubation period, sample weight, pre‐incubation time, adsorption time, and temperature, precursors and their concentrations has been studied. In the optimized conditions, detection of 2‐AP produced by Bacillus cereus ATCC10702 using only 0.5 g of sample volume was 85 μg/kg. Along with 2‐AP, 15 other compounds produced by B. cereus were also reported out of which 14 were reported for the first time consisting mainly of (E)?2‐hexenal, pentadecanal, 4‐hydroxy‐2‐butanone, n‐hexanal, 2–6‐nonadienal, 3‐methoxy‐2(5H) furanone and 2‐acetyl‐1‐pyridine and octanal. High recovery of 2‐AP (87 %) from very less amount of B. cereus samples was observed. The method is reproducible fast and can be used for detection of 2‐AP production by B. cereus. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1356–1363, 2014     

Biogas generation apple pulp

In view of the pressing problem that appears in our region (Asturias, north of Spain) with the residues from the cider production, it was decided to test this kind of material as a co-substrate joint with slaughterhouse waste in a laboratory unit.     

Atomic Layer Deposition of Functional Layers for on Chip 3D Li‐Ion All Solid State Microbattery

Nowadays, millimeter scale power sources are key devices for providing autonomy to smart, connected, and miniaturized sensors. However, until now, planar solid state microbatteries do not yet exhibit a sufficient surface energy density. In that context, architectured 3D microbatteries appear therefore to be a good solution to improve the material mass loading while keeping small the footprint area. Beside the design itself of the 3D microbaterry, one important technological barrier to address is the conformal deposition of thin films (lithiated or not) on 3D structures. For that purpose, atomic layer deposition (ALD) technology is a powerful technique that enables conformal coatings of thin film on complex substrate. An original, robust, and highly efficient 3D scaffold is proposed to significantly improve the geometrical surface of miniaturized 3D microbattery. Four functional layers composing the 3D lithium ion microbattery stacking has been successfully deposited on simple and double microtubes 3D templates. In depth synchrotron X‐ray nanotomography and high angle annular dark field transmission electron microscope analyses are used to study the interface between each layer. For the first time, using ALD, anatase TiO₂ negative electrode is coated on 3D tubes with Li₃PO₄ lithium phosphate as electrolyte, opening the way to all solid‐state 3D microbatteries. The surface capacity is significantly increased by the proposed topology (high area enlargement factor – “thick” 3D layer), from 3.5 μA h cm^?2 for a planar layer up to 0.37 mA h cm^?2 for a 3D thin film (105 times higher).     

Photoluminescence properties of Ca2Al2O5:RE3+ (RE = Eu,Dy and Tb) phosphors for solid state lighting

Ca₂Al₂O₅:Eu³⁺, Ca₂Al₂O₅:Dy³⁺ and Ca₂Al₂O₅:Tb³⁺ phosphors were synthesized using a combustion synthesis method. The prepared phosphors were characterized by X‐ray powder diffraction for phase purity, by scanning electron microscopy for morphology, and by photoluminescence for emission and excitation measurements. The Ca₂Al₂O₅:Eu³⁺ phosphors could be efficiently excited at 396 nm and showed red emission at 594 nm and 616 nm due to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transitions. Dy³⁺‐doped phosphors showed blue emission at 482 nm and yellow emission at 573 nm. Ca₂Al₂O₅:Tb³⁺ phosphors showed emission at 545 nm when excited at 352 nm. Concentration quenching occurred in both Eu³⁺ and Dy³⁺phosphors at 0.5 mol%. Photoluminescence results suggested that the aluminate‐based phosphor could be a potential candidate for application in environmentally friendly based lighting technologies.     

Degradation of mikan (Japanese mandarin orange) peel by a novel Penicillium species with cellulolytic and pectinolytic activity

AIMS: The mikan, or Japanese mandarin orange, is a popular fruit in Japan, but its peel is one of the major agricultural wastes. The aims of this study were to screen, isolate, and characterize a mikan peel-degrading microbe. METHODS AND RESULTS: Several samples including activated sludge, sediment, compost and spoiled mikan peel were collected and cultured in a minimal salt medium containing mikan peel as the sole carbon source. Degradation activity was found in a culture of the spoiled mikan peel, and a fungal strain, designated OP1, with both cellulolytic and pectinolytic activity was isolated. No toxic metabolites, such as mycotoxins, were found in OP1 cultures, as evaluated by gas chromatography/mass spectrometry. A phylogenetic analysis strongly suggested that OP1 is a novel species of the genus Penicillium. CONCLUSIONS: Results suggest that Penicillium sp. OP1 plays an important role in aerobic microbial degradation of cellulose/pectin-rich biomasses in soil ecology, and further imply that this strain may be useful for both simultaneous cellulase/pectinase production and reduction of agricultural waste. SIGNIFICANCE AND IMPACT OF THE STUDY: The present results advance our understanding of microbial degradation of cellulose/pectin-rich biomasses in the natural environment, and offer a new tool for reduction of agricultural waste, which is important for sustaining circulatory societies.