Photoluminescence and piezoelectric behaviour of Y2Zr2O7 pyrochlore‐based multifunctional materials and the influence of Eu3+ and Sm3+

Y₂Zr₂O₇‐doped with Eu³⁺ and Sm³⁺ phosphors were prepared for the first time as multifunctional smart materials using a solid‐state reaction method at 1400^oC. Thermal behaviour, crystal structure, surface morphology, and elemental analysis were characterized using thermogravimetric (TG) and differential thermal (DTA) analyses, X‐ray diffraction (XRD) and scanning electron microscope equipped with energy‐dispersive X‐ray spectroscopy (SEM‐EDX). Experimental results revealed that both phosphors have a pyrochlore structure with a cubic crystal system. Photoluminescence properties were also measured and red emission was observed from Y_1.90Eu_0.10Zr₂O₇ and Y_1.90Sm_0.10Zr₂O₇ phosphors. Dielectric constant, loss tangent, piezoelectric charge constant, and Curie temperature of all the samples were determined using an LCR‐meter, d₃₃‐meter, and TG/DTA. Eu doping in Y₂Zr₂O₇ resulted in a high dielectric constant (9.61) and low loss tangent (1.67%) values, whereas high piezoelectric charge constant (0.68 pC/N) and high Curie temperature (820°C) could be obtained using Sm‐doped Y₂Zr₂O₇.     

Assessment of the potential bactericide effect of self‐cleaning floors: a proposed protocol

The antibacterial properties of self‐cleaning coatings are based on bactericide nanoparticles (NPs). Ecotoxicity of these NPs have been assessed mostly in suspension, using standard bioassays. Here a protocol is proposed to test actual coating samples, using the Vibrio fischeri bioluminescence inhibition bioassay. The protocol was designed to test bactericide properties of specially coated PVC floors being used in hospital environments under quasinatural conditions, such as prolonged exposure or room temperature. To take into consideration that the light output of the bacteria under prolonged exposure naturally changes, a correction factor is proposed.     

Positioning accuracy of a single-isocenter multiple targets SRS treatment: A comparison between Varian TrueBeam CBCT and Brainlab ExacTrac

PurposeThis study compared the positioning accuracy between cone-beam CT (CBCT) and ExacTrac (ETX) for a single-isocenter multiple target stereotactic radiosurgery (SRS) on two TrueBeam STx systems.MethodsA single-isocenter treatment plan was simulated on an anthropomorphic head phantom with six spherical steel ball bearings (BBs). One of the BBs was chosen to be the isocenter. The five off-isocenter targets were located at various distances from the isocenter. MV portal images were generated to evaluate the deviations between the expected and the real center of the targets after CBCT and ETX positioning, respectively.ResultsThe evaluation of the positioning accuracy for the isocenter target showed that CBCT and ETX positioning provided comparable, sub-millimetric results. Deviations in positioning accuracy were also calculated for all other targets, also showing comparable results for CBCT and ETX. Moreover, our study showed that the deviation between CBCT and ETX positioning were in better agreement for TBSTx1 and deviated slightly higher on TBSTx2 (maximum: 1.23 mm at S/I direction), due to a less perfect alignment between the CBCT coordinate system and the ETX coordinate system on TBSTx2 compared to TBSTx1. This study also showed a correlation between the target positioning accuracy and the distance to the isocenter.ConclusionThe positioning accuracy of ETX and CBCT for targets located at isocenter and off-isocenter locations was compared on two treatment machines and found comparable. Our study highlights the importance of a proper calibration procedure, to ensure correct alignment between the CBCT, ETX and machine coordinate systems.     

Impact of lung density on isolated lung tumor dose in VMAT using inline MR-Linac

PurposeThis study investigated the impact of lung density on the isolated lung tumor dose for volumetric modulated arc therapy (VMAT) in an inline magnetic resonance linear accelerator (MR-Linac) using the Monte Carlo (MC) simulation.MethodsCT images of the thorax phantoms with lung tumors of 1, 2, and 3 cm diameters were converted into voxel-base phantoms with lung densities of 0.1, 0.2, and 0.3 g/cm³, respectively. The dose distributions were calculated for partial-arc VMAT. The dose distributions were compared using dose differences, dose volume histograms, and dose volume indices.ResultsIn all cases, the inline magnetic field significantly enhanced the lung tumor dose compared to that at 0 T. For the 1 cm lung tumor, the inline magnetic field of 1 T increased the minimum dose of 95% of the Planning target volume (PTV D₉₅) by 14.0% in 0.1 g/cm³ lung density as compared to that in 0.3 g/cm³ at 0 T. In contrast, at 0 and 0.5 T, the PTV D₉₅ in 0.3 g/cm³ lung density was larger than that in lung density of 0.1 g/cm³. For the 2 cm lung tumor, a similar tendency to 1 cm was observed, whereas the dose impact of lung density was smaller than that for 1 cm. For the 3 cm lung tumor, the lung tumor dose was independent of lung density at 0.5 T and 1.0 T.ConclusionThe inline MR-Linac with the magnetic field over 1 T can enhance the PTV D₉₅ for VMAT regardless of the lung density.     

Do aminopyridinium-based ionic liquids promising to control Culex pipiens mosquitoes in the future?

In Al-Madinah Al-Munawwarah region, Kingdom of Saudi Arabia, Culex pipiens is considered one of the most common mosquitoes. Owing to their exceptional chemical, physical, biological, and eco-friendly properties, ionic liquids (ILs) have been recently considered promising compounds in managing a variety of organisms. Six aminopyridinium-based IL derivatives were assessed to follow their efficacy against adults of C. pipiens. Mosquitoes were treated with aminopyridinium-based IL derivatives either orally or by spraying. It was observed in the first three days of treatment that the accumulated mortality rates were generally higher in sprayed mosquitoes with IL derivatives than their accumulated mortality rates in orally treated mosquitoes with the same ILs. It was also observed that the accumulated mortalities of sprayed mosquitoes at 0.125 and 0.25 g/L were higher than those in mosquitoes orally treated with the same concentrations. The highest mortality rates were 64 and 80% for sprayed and orally treated mosquitoes, respectively. The mode of action of aminopyridinium-based IL derivatives was tracked, and it is demonstrated to be through the digestive route for orally treated mosquitoes. This is the first study to show the adulticidal effects of aminopyridinium-based ILs in controlling C. pipiens.     

Experimental models of maternal–fetal interface and their potential use for nanotechnology applications

During pregnancy, the placenta regulates the transfer of oxygen, nutrients, and residual products between the maternal and fetal bloodstreams and is a key determinant of fetal exposure to xenobiotics from the mother. To study the disposition of substances through the placenta, various experimental models are used, especially the perfused placenta, placental villi explants, and cell lineage models. In this context, nanotechnology, an area of study that is on the rise, enables the creation of particles on nanometric scales capable of releasing drugs aimed at specific tissues. An important reason for furthering the studies on transplacental transfer is to explore the potential of nanoparticles (NPs), in new delivery strategies for drugs that are specifically aimed at the mother, the placenta, or the fetus and that involve less toxicity. Due to the fact that the placental barrier is essential for the interaction between the maternal and fetal organisms as well as the possibility of NPs being used in the treatment of various pathologies, the aim of this review is to present the main experimental models used in studying the maternal–fetal interaction and the action of NPs in the placental environment.     

Shrub influences on seedling performance when restoring the slow‐growing conifer Pilgerodendron uviferum in southern bog forests

Forest restoration is most efficient if it can take advantage of facilitative interactions between established vegetation and planted trees. However, positive and negative interactions have been identified in a number of plant communities. After centuries of anthropogenic fires, forest recovery has been extremely slow in southern bog forests previously dominated by the slow‐growing and vulnerable conifer Pilgerodendron uviferum on Chiloé Island, Chile. Today, the landscape is dominated by secondary shrublands with scattered patches of Sphagnum moss and limited natural tree regeneration. We hypothesized that the retention of secondary shrubs facilitates the early performance of P. uviferum restoration plantings by providing better microsite conditions. To test this hypothesis, we compared the response of seedlings planted on sites prepared at two levels of intervention: after shrubs had been removed or where shrubs were retained. Shrub retention showed a nurse‐plant effect on P. uviferum seedlings 4 years after planting, which resulted in reduced physiological stress (measured as Fv/Fm) for seedlings, as well as reduced browsing. Consequently, the seedlings growing in areas with shrub retention had larger height increment and higher vitality than those in areas where shrubs had been removed. Thus, the more open micro‐site conditions created by shrub removal resulted in generally poorer seedling performance, although seedling mortality—which was low overall (approximately 2–4%)—showed no significant difference between the two levels of intervention. These findings have direct implications for the restoration of slow‐growing conifers that can tolerate extreme wet conditions in highly degraded forests.