High‐Performance Wide Bandgap Copolymers Using an EDOT Modified Benzodithiophene Donor Block with 10.11% Efficiency

Newly developed benzo[1,2‐b:4,5‐b′]dithiophene (BDT) block with 3,4‐ethylenedioxythiophene (EDOT) side chains is first employed to build efficient photovoltaic copolymers. The resulting copolymers, PBDTEDOT‐BT and PBDTEDOTFBT, have a large bandgap more than 1.80 eV, which is attributed to the increased steric hindrance between the BDT and EDOT skeletons. Both copolymers possess the satisfied absorptions, low‐lying highest occupied molecular orbital (HOMO) levels and high crystallinity. Using the fluorination strategy, PBDTEDOT‐FBT exhibits a wider and stronger absorption and a deeper HOMO level than those of PBDTEDOT‐BT. PBDTEDOT‐FBT:[6,6]‐Phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) blend also shows the higher hole mobility and better surface morphology compared with the PBDTEDOTBT:PC₇₁BM blend. Combination of above advantages, PBDTEDOT‐FBT devices exhibit much higher power conversion efficiency (PCE) of 10.11%, with an improved open circuit voltage (V_oc) of 0.86 V, short circuit current densities (J_sc) of 16.01 mA cm^?2, and fill factor (FF) of 72.6%. This work not only provides a newly efficient candidate of BDT donor block modified with EDOT conjugated side chains, but also achieves high‐performance large bandgap copolymers for polymer solar cells (PSCs) via the synergistic effect of fluorination and side chain engineering strategies.     

A Flexible Dual‐Ion Battery Based on PVDF‐HFP‐Modified Gel Polymer Electrolyte with Excellent Cycling Performance and Superior Rate Capability

Dual‐ion batteries (DIBs) have attracted increasing attention owing to their merits of high working voltage, low cost, and especially environmental friendliness. However, the cycling stability of most DIBs is still unsatisfying due to the decomposition of conventional liquid carbonate electrolytes under high working voltages. Exploration of gel polymer electrolytes (GPEs) with good electrochemical stability at high voltage is a possible strategy to optimize their cycling stability. A high‐performance flexible DIB based on a poly(vinylidene fluoride‐hexafluoro propylene) GPE codoped with poly(ethylene oxide) and graphene oxide via weak bond interactions is herein reported for the first time. The prepared polymer electrolyte shows a 3D porous network with significantly improved ionic conductivity up to 2.1 × 10^?3 S cm^?1, which is favorable for fast ionic transportation of both cations and anions. As a result, this DIB exhibits excellent cycling stability with a capacity retention of 92% after 2000 cycles at a high current rate of 5C (1C is corresponding to 100 mA g^?1), which is among the best performances of DIBs. Moreover, good flexibility and thermal stability (up to 90 °C) are also achieved for this battery, indicating its potential applications for high‐performance flexible energy storage devices.     

Synthesis of Pseudocapacitive Polymer Chain Anode and Subnanoscale Metal Oxide Cathode for Aqueous Hybrid Capacitors Enabling High Energy and Power Densities along with Long Cycle Life

Aqueous electrochemical energy storages are of enormous attention due to their high safety and being environmentally friendly, but they must satisfy very challenging standards in energy and power densities over long repeated charging/discharging cycles. Herein, a strategy to realize high‐performance aqueous hybrid capacitors (AHCs) using pseudocapacitive negative and positive electrodes is reported. Polymer chains, which are synthesized by in situ polymerization of polyaniline on reduced graphene sheets, show fiber‐like morphologies and the redox‐reactive surface area allowing high capacitance as anode materials even at a high current density of 20 A g^?1 and a high loading of ≈6 mg cm^?2. Additionally, subnanoscale metal oxide particles on graphene are utilized as pseudocapacitive cathode materials and they show the approximately threefold higher capacitance than nanocrystals of ≈10 nm. Assembling these polymer chain anode and subnanoscale metal oxide cathode in full‐cell AHCs is shown to give the high energy density exceeding those of aqueous batteries along with the ≈100% capacity retention over 100 000 redox cycles. Additionally, AHCs exhibit the high power density allowing ultrafast charging, so that the switching wearable display kit with two AHCs in series can be charged within several seconds by the flexible photovoltaic module and USB switching charger.     

Efficient Ternary Polymer Solar Cells with Two Well‐Compatible Donors and One Ultranarrow Bandgap Nonfullerene Acceptor

Nonfullerene polymer solar cells (PSCs) are fabricated by using one wide bandgap donor PBDB‐T and one ultranarrow bandgap acceptor IEICO‐4F as the active layers. One medium bandgap donor PTB7‐Th is selected as the third component due to the similar highest occupied molecular orbital level compared to that of PBDB‐T and their complementary absorption spectra. The champion power conversion efficiency (PCE) of PSCs is increased from 10.25% to 11.62% via incorporating 20 wt% PTB7‐Th in donors, with enhanced short‐circuit current (J_SC) of 24.14 mA cm^?2 and fill factor (FF) of 65.03%. The 11.62% PCE should be the highest value for ternary nonfullerene PSCs. The main contribution of PTB7‐Th can be summarized as the improved photon harvesting and enhanced exciton utilization of PBDB‐T due to the efficient energy transfer from PBDB‐T to PTB7‐Th. Meanwhile, PTB7‐Th can also act as a regulator to adjust PBDB‐T molecular arrangement for optimizing charge transport, resulting in the enhanced FF of ternary PSCs. This experimental result may provide new insight for developing high‐performance ternary nonfullerene PSCs by selecting two well‐compatible donors with different bandgap and one ultranarrow bandgap acceptor.     

A Facile Method to Fine‐Tune Polymer Aggregation Properties and Blend Morphology of Polymer Solar Cells Using Donor Polymers with Randomly Distributed Alkyl Chains

The device performance of polymer solar cells (PSCs) is strongly dependent on the blend morphology. One of the strategies for improving PSC performance is side‐chain engineering, which plays an important role in controlling the aggregation properties of the polymers and thus the domain crystallinity/purity of the donor–acceptor blends. In particular, for a family of high‐performance donor polymers with strong temperature‐dependent aggregation properties, the device performances are very sensitive to the size of alkyl chains, and the best device performance can only be achieved with an optimized odd‐numbered alkyl chain. However, the synthetic route of odd‐numbered alkyl chains is costly and complicated, which makes it difficult for large‐scale synthesis. Here, this study presents a facile method to optimize the aggregation properties and blend morphology by employing donor polymers with a mixture of two even‐numbered, randomly distributed alkyl chains. In a model polymer system, this study suggests that the structural and electronic properties of the random polymers comprising a mixture of 2‐octyldodecyl and 2‐decyltetradecyl alkyl chains can be systematically tuned by varying the mixing ratio, and a high power conversion efficiency (11.1%) can be achieved. This approach promotes the scalability of donor polymers and thus facilitates the commercialization of PSCs.     

A C-NMR study of 10,12-tricosadiynoic acid and the corresponding phospholipid and phospholipid polymer

Diacetylene phospholipids are presently being studied because of their potential to polymerise in vesicles, multilayers and natural biomembranes. ¹³C-NMR spectra and spin-lattice relaxation times have now been obtained of a diacetylene phospholipid present in a sonicated dispersion in water. Similar data have been obtained of a monoacetylene phospholipid and a saturated phospholipid. For further comparison the spectrum of a diacetylenic fatty acid in benzene-d₆ was also examined and relaxation data obtained. A comparison of the various relaxation data provides an indication of the restricted motion associated with the two conjugated triple bonds of the diacetylene phospholipid within the lipid bilayer structure. A proximity interaction between diacetylene groups occurs and a conformation for the diacetylene part of the lipid in the bilayer is deduced. The ¹³C-NMR spectrum of a soluble phospholipid polymer in C²HCl₃, obtained by ultraviolet irradiation of the diacetylene phospholipid, shows that the two conjugated triple bonds of the monomer is replaced in the polymer by an alternating double and triple bonded conjugated structure.     

Microgravity tissue engineering

Summary Tissue engineering studies were done using isolated cells, three-dimensional polymer scaffolds, and rotating bioreactors operated under conditions of simulated microgravity. In particular, vessel rotation speed was adjusted such that 10 mm diameter × 2 mm thick cell-polymer constructs were cultivated in a state of continuous free-fall. Feasibility was demonstrated for two different cell types: cartilage and heart. Conditions of simulated microgravity promoted the formation of cartilaginous constructs consisting of round cells, collagen and glycosaminoglycan (GAG), and cardiac tissue constructs consisting of elongated cells that contracted spontaneously and synchronously. Potential advantages of using a simulated microgravity environment for tissue engineering were demonstrated by comparing the compositions of cartilaginous constructs grown under four different in vitro culture conditions: simulated microgravity in rotating bioreactors, solid body rotation in rotating bioreactors, turbulent mixing in spinner flasks, and orbital mixing in petri dishes. Constructs grown in simulated microgravity contained the highest fractions of total regenerated tissue (as a percent of construct dry weight) and of GAG, the component required for cartilage to withstand compressive force.     

Synthesis,characterization and biocompatibility of PEGA resins

Three types of beaded polyethylene glycol polyacrylamide copolymers (PEGA) with a high content of polyethylene glycol (PEG) were synthesized by inverse suspension polymerization and characterized for peptide synthesis and with respect to their physical properties. Several peptides of high purity have been synthesized on the resin. The properties which were determined were loading of amino group, swelling, bead size distribution, porosity, flexibility and compatibility with active biomolecules. A loading of 0.35 mmol/g has been obtained and the swelling was excellent in solvents of various polarities ranging from water to dichloromethane. The ¹³C-NMR T₁-relaxation times of a resin containing a peptide were determined in DMSO-d₆ and the resin was found to exhibit a behaviour similar to the components in free solution.     

A new class of network-polymeric chiral stationary phases

A strategy based on the use of homo bi- and multifunctional building blocks for the synthesis of a new class of network-polymeric chiral stationary phases has been evaluated. The key steps comprise acylation of N,N′-diallyl-L-tartardiamide (DATD) and reaction with a multifunctional hydrosilane, yielding a network polymer incorporating the bifunctional C₂-symmetric chiral selector. Covalent bonding to a functionalized silica takes place during the latter process. Many of these chiral sorbents show interesting enantioselective properties toward a wide variety of racemic solutes under normal-phase (hexane-based) conditions. The retention is mainly caused by the hydrogen-bonding ability of the analyte, which is regulated by mobile phase additives like alcohol or ether cosolvents. The most interesting chiral stationary phases, in terms of broad enantioselectivity, were obtained from O,O′-diaryol-DATD-derivatives, particularly those containing the 3,5-dimethylbenzoyl and the 4-(tert-butyl)benzoyl moieties. Since high column efficiencies can be obtained with these chiral sorbents, an α-value of ca. 1.2 is usually sufficient to produce baseline separation. A large number of neutral as well as acidic or basic drug racemates are resolved without derivatization. © 1995 Wiley-Liss, Inc.     

Alternating Magnetic Field-Responsive Hybrid Gelatin Microgels for Controlled Drug Release

Magnetically-responsive nano/micro-engineered biomaterials that enable a tightly controlled, on-demand drug delivery have been developed as new types of smart soft devices for biomedical applications. Although a number of magnetically-responsive drug delivery systems have demonstrated efficacies through either in vitro proof of concept studies or in vivo preclinical applications, their use in clinical settings is still limited by their insufficient biocompatibility or biodegradability. Additionally, many of the existing platforms rely on sophisticated techniques for their fabrications. We recently demonstrated the fabrication of biodegradable, gelatin-based thermo-responsive microgel by physically entrapping poly(N-isopropylacrylamide-co-acrylamide) chains as a minor component within a three-dimensional gelatin network. In this study, we present a facile method to fabricate a biodegradable drug release platform that enables a magneto-thermally triggered drug release. This was achieved by incorporating superparamagnetic iron oxide nanoparticles and thermo-responsive polymers within gelatin-based colloidal microgels, in conjunction with an alternating magnetic field application system.