Conveying Advanced Li‐ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills

Li‐ion batteries (LIB's) are of the greatest practical utility for portable electronics and electric vehicles (EV's). LIB energy, power and cycle life performances depend on cathode and anode compositions and morphology, electrolyte composition and the overall cell design. Electrode morphology is influenced by the shape and size of the active material (AM), conductive additive (CA) particles, the polymeric binder properties, and also on the AM/CA/binder mass ratio. At the same time, it also substantially depends on the electrode preparation process. This process is usually comprised of mixing a solvent, a binder, AM and CA powders, and casting the resulting slurry onto a current collector foil followed by a drying process. Whereas the problems of electrode morphology and their influence on the LIB‐electrode performance always receive a proper attention, the influence of slurry properties and slurry preparation techniques on the electrode morphology is often overlooked or at least underrated. The present work summarizes the current state‐of‐the‐art in the field of LIB‐electrode precursor slurries preparation, characterized by multicomponent compounds and large variations in sizes and shapes of the solid components. Approaches to LIB‐electrode slurry preparation are outlined and discussed in the context of the ultimate LIB‐electrode morphology and performance.     

Stable Li–Organic Batteries with Nafion‐Based Sandwich‐Type Separators

Similar to Li–S batteries, Li–organic batteries have also been plagued by the dissolution of active materials and the resulting shuttle effect for many years. An effective strategy to eliminate the shuttle effect is adopting solid electrolytes or Li–ion permselective separators to prohibit the dissolved electroactive species from migrating to the Li anode. A polypropylene/Nafion/polypropylene (PNP) sandwich‐type separator is reported with many advantages in comparison with previously reported LISICON, polymer electrolyte, and other Nafion utilization forms. The physical and chemical properties of PNP separators are studied in detail by cross‐section scanning electron microscopy (SEM), infrared spectroscopy (IR), and electrochemical impedance spectroscopy. 1,1′‐Iminodianthraquinone (IDAQ), a novel organic cathode, is taken as an example to quantitatively investigate the function of PNP separators. In the presence of PNP5 with the most appropriate Nafion loading of 0.5 mg cm^–2, IDAQ is able to achieve dramatically improved cycling stability with capacity retention of 76% after 400 cycles and Coulombic efficiency above 99.6%, which reaches the highest level for reported soluble organic electrode materials. Besides Li–organic batteries, such kind of Nafion‐based sandwich‐type separators are also promising for Li–S batteries and other new battery designs involving dissolved electroactive species.     

Nanoscale Elastic Changes in 2D Ti3C2Tx (MXene) Pseudocapacitive Electrodes

Designing sustainable electrodes for next generation energy storage devices relies on the understanding of their fundamental properties at the nanoscale, including the comprehension of ions insertion into the electrode and their interactions with the active material. One consequence of ion storage is the change in the electrode volume resulting in mechanical strain and stress that can strongly affect the cycle life. Therefore, it is important to understand the changes of dimensions and mechanical properties occurring during electrochemical reactions. While the characterization of mechanical properties via macroscopic measurements is well documented, in situ characterization of their evolution has never been achieved at the nanoscale. It is reported here with in situ imaging, combined with density functional theory of the elastic changes of a 2D titanium carbide (Ti₃C₂T_x) based electrode in direction normal to the basal plane (electrode surface) during alkaline cation intercalation/extraction. 2D carbides, known as MXenes, are promising new materials for supercapacitors and various kinds of batteries, and understanding the coupling between their mechanical and electrochemical properties is therefore necessary. The results show a strong correlation between the cations content and the out‐of‐plane elastic modulus. This strategy enables identifying the preferential intercalation pathways within a single particle, which is important for understanding ionic transport in these materials.     

Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries

Lithium‐ion batteries (LIBs) have dominated the portable electronics industry and solid‐state electrochemical research and development for the past two decades. In light of possible concerns over the cost and future availability of lithium, sodium‐ion batteries (SIBs) and other new technologies have emerged as candidates for large‐scale stationary energy storage. Research in these technologies has increased dramatically with a focus on the development of new materials for both the positive and negative electrodes that can enhance the cycling stability, rate capability, and energy density. Two‐dimensional (2D) materials are showing promise for many energy‐related applications and particularly for energy storage, because of the efficient ion transport between the layers and the large surface areas available for improved ion adsorption and faster surface redox reactions. Recent research highlights on the use of 2D materials in these future ‘beyond‐lithium‐ion’ battery systems are reviewed, and strategies to address challenges are discussed as well as their prospects.     

Xylene‐Bridged Phosphaviologen Oligomers and Polymers as High‐Performance Electrode‐Modifiers for Li‐Ion Batteries

Lithium‐ion batteries are one of the most common forms of energy storage devices used in society today. Due to the inherent limitations of conventional Li‐ion batteries, organic materials have surfaced as potentially suitable electrode alternatives with improved performance and sustainability. Viologens and phosphaviologens in particular, are strong electron‐accepting materials with excellent kinetic properties, making them suitable candidates for battery applications. In this paper, new polymeric species of the latter moieties are reported that lead to improved electrode stability and device performance. The performance of the phosphaviologen is further enhanced through the utilization of both redox steps, allowing for good performance proof‐of‐concept hybrid organic/Li‐ion batteries. This opens the potential for more sustainable and improved battery performance for use in current energy applications.     

An amperometric lactate biosensor based on lactate dehydrogenase immobilized onto graphene oxide nanoparticles‐modified pencil graphite electrode

A novel amperometric lactate biosensor was developed based on immobilization of lactate dehydrogenase onto graphene oxide nanoparticles‐decorated pencil graphite electrode. The enzyme electrode was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR), and cyclic voltammetry at different stages of its construction. The biosensor showed optimum response within 5 s at pH 7.3 (0.1 M sodium phosphate buffer) and 35°C, when operated at 0.7 V. The biosensor exhibited excellent sensitivity (detection limit as low as 0.1 μM), fast response time (5 s), and wider linear range (5–50 mM). Analytical recovery of added lactic acid in serum was between 95.81–97.87% and within‐batch and between‐batch coefficients of variation were 5.04 and 5.40%, respectively. There was a good correlation between serum lactate values obtained by standard colorimetric method and the present biosensor (r = 0.99). The biosensor measured lactate levels in sera of apparently healthy subjects and persons suffering from lactate acidosis and other biological materials (milk, curd, yogurt, beer, white wine, and red wine). The enzyme electrode lost 25% of its initial activity after 60 days of its regular uses, when stored dry at 4°C.     

Cook双球囊联合改良B-Lynch缝合术对产后出血的治疗效果观察

目的:探讨Cook双球囊联合改良B-Lynch缝合术对产后出血的治疗效果。方法:选取2015年6月～2018年6月在我院经剖宫产术分娩并发生产后出血的产妇81例进行回顾性分析。根据术中止血方法的不同分为两组,对照组40例采用Cook双球囊进行止血,观察组41例在对照组的基础上应用改良B-Lynch缝合术进行止血。对两组患者的手术相关指标、止血成功率、子宫切除率、术后恢复情况和并发症发生情况进行比较。结果:观察组的术中出血量、术后24 h出血量和输血量显著低于对照组(P0.05),止血时间显著短于对照组(P0.05);观察组患者的止血成功率显著高于对照组(P0.05),子宫切除率和切口恢复时间显著低于对照组(P0.05),两组患者的住院时间和并发症发生率比较无统计学差异(P0.05)。结论:Cook双球囊联合改良B-Lynch缝合术对剖宫产产后出血患者的临床效果显著优于单用Cook双球囊,且安全性较高。     

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H2 Production with Nonprecious Metal Catalysts

In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at ?10 mA cm^?2), unprecedented mass activities (>800 A g^?1 at 100 mV overpotential), high turnover frequencies (6.96 H₂ s^?1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.