Extrinsic Movable Ions in MAPbI3 Modulate Energy Band Alignment in Perovskite Solar Cells

Ionic movement is considered awful in perovskite solar cells (PSCs) for relating with the hysteresis and long‐term instability. However, the positive role of ions to enhance the energy band bending for high performance PSC is always overlooked, let alone reducing the hysteresis. In this work, LiI is doped in CH₃NH₃PbI₃. It is observed that the aggregation of Li⁺/I^? tunes the energy level of the perovskite and induces n/p doping in CH₃NH₃PbI₃, which makes charge extraction quite efficient from perovskite to both NiO and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) layer. Therefore, in NiO/LiI doped perovskite/PCBM solar cells, Li⁺ and I^? modulate the interface energy band alignment to facilitate the electron/hole transport and reduce the interface energy loss. On the other hand, n/p doping enlarges Fermi energy level splitting of the PSCs to improve the photovoltage. The performance of LiI doped PSCs is much higher with reduced hysteresis compared to the undoped solar cells. This work highlights the positive effect of selective ionic doping, which is promisingly important to design the stable and efficient PSCs.     

Superelastic Hybrid CNT/Graphene Fibers for Wearable Energy Storage

The demands for wearable technologies continue to grow and novel approaches for powering these devices are being enabled by the advent of new electromaterials and novel fabrication strategies. Herein, a novel approach is reported to develop superelastic wet‐spun hybrid carbon nanotube graphene fibers followed by electrodeposition of polyaniline to achieve a high‐performance fiber‐based supercapacitor. It is found that the specific capacitance of hybrid carbon nanotube (CNT)/graphene fiber is enhanced up to ≈39% using a graphene to CNT fiber ratio of 1:3. Fabrication of spring‐like coiled fiber coated with an elastic polymer shows an extraordinary elasticity capable of 800% strain while affording a specific capacitance of ≈138 F g^?1. The elastic rubber coating enables extreme stretchability and enabling cycles with up to 500% strain for thousands of cycles with no significant change in its performance. Multiple supercapacitors can be easily assembled in series or parallel to meet specific energy and power needs.     

Skin‐Inspired Low‐Grade Heat Energy Harvesting Using Directed Ionic Flow through Conical Nanochannels

Low‐grade heat energies are ubiquitous, and most of these energies are untapped as heated river water or seawater. Therefore, it is meaningful and valuable to extract the stored energies in the context of the energy crisis by using a simple device with low‐cost effectiveness. Here, a simple thermoelectric conversion system is shown using directed ionic flow through the biomimetic smart nanochannels, inspired by the human skin. The obtained power density of the nanodevice can ideally be 88.8 W m^?2 with a membrane temperature gradient (ΔT) of 40 °C. As proof of concept, it is demonstrated that the principle can be introduced into simple and portable prototypes to harvest low‐grade heat. Such a thermoelectric conversion apparatus provides a new venue for low‐grade heat harvesting. In addition, this self‐powered system may extend the electronic skin field and find applications in skin prosthetics.     

Lithium Ion Capacitors in Organic Electrolyte System: Scientific Problems,Material Development,and Key Technologies

Lithium ion capacitors (LICs), which are hybrid electrochemical energy storage devices combining the intercalation/deintercalation mechanism of a lithium‐ion battery (LIB) electrode with the adsorption/desorption mechanism of an electric double‐layer capacitor (EDLC) electrode, have been extensively investigated during the past few years by virtue of their high energy density, rapid power output, and excellent cycleability. In this review, the LICs are defined as the devices with an electrochemical intercalation electrode and a capacitive electrode in organic electrolytes. Both electrodes can serve as anode or cathode. Throughout the history of LICs, tremendous efforts have been devoted to design suitable electrode materials or develop novel type LIC systems. However, one of the key challenges encountered by LICs is how to balance the sluggish kinetics of intercalation electrodes with high specific capacity against the high power characteristics of capacitive electrode with low specific capacitance. Herein, the developments and the latest advances of LIC in material design strategies and key techniques according to the basic scientific problems are summarized. Perspectives for further development of LICs toward practical applications are also proposed.     

Highly Stretchable Separator Membrane for Deformable Energy‐Storage Devices

With the emergence of stretchable electronic devices, there is growing interest in the development of deformable power accessories that can power them. To date, various approaches have been reported for replacing rigid components of typical batteries with elastic materials. Little attention, however, has been paid to stretchable separator membranes that can not only prevent internal short circuit but also provide an ionic conducting pathway between electrodes under extreme physical deformation. Herein, a poly(styrene‐b‐butadiene‐b‐styrene) (SBS) block copolymer–based stretchable separator membrane is fabricated by the nonsolvent‐induced phase separation (NIPS). The diversity of mechanical properties and porous structures can be obtained by using different polymer concentrations and tuning the affinity among major components of NIPS. The stretchable separator membrane exhibits a high stretchability of around 270% strain and porous structure having porosity of 61%. Thus, its potential application as a stretchable separator membrane for deformable energy devices is demonstrated by applying to organic/aqueous electrolyte–based rechargeable lithium‐ion batteries. As a result, these batteries manifest good cycle life and stable capacity retention even under a stretching condition of 100%, without compromising the battery's performance.     

A Practicable Li/Na‐Ion Hybrid Full Battery Assembled by a High‐Voltage Cathode and Commercial Graphite Anode: Superior Energy Storage Performance and Working Mechanism

With the rapidly growing demand for low‐cost and safe energy storage, the advanced battery concepts have triggered strong interests beyond the state‐of‐the‐art Li‐ion batteries (LIBs). Herein, a novel hybrid Li/Na‐ion full battery (HLNIB) composed of the high‐energy and lithium‐free Na₃V₂(PO₄)₂O₂F (NVPOF) cathode and commercial graphite anode mesophase carbon micro beads is for the first time designed. The assembled HLNIBs exhibit two high working voltage at about 4.05 and 3.69 V with a specific capacity of 112.7 mA h g^?1. Its energy density can reach up to 328 W h kg^?1 calculated from the total mass of both cathode and anode materials. Moreover, the HLNIBs show outstanding high‐rate capability, long‐term cycle life, and excellent low‐temperature performance. In addition, the reaction kinetics and Li/Na‐insertion/extraction mechanism into/out NVPOF is preliminarily investigated by the galvanostatic intermittent titration technique and ex situ X‐ray diffraction. This work provides a new and profound direction to develop advanced hybrid batteries.     

Jabuticaba‐Inspired Hybrid Carbon Filler/Polymer Electrode for Use in Highly Stretchable Aqueous Li‐Ion Batteries

Stretchable electronics are considered as next‐generation devices; however, to realize stretchable electronics, it is first necessary to develop a deformable energy device. Of the various components in energy devices, the fabrication of stretchable current collectors is crucial because they must be mechanically robust and have high electrical conductivity under deformation. In this study, the authors present a conductive polymer composite composed of Jabuticaba‐like hybrid carbon fillers containing carbon nanotubes and carbon black in a simple solution process. The hybrid carbon/polymer (HCP) composite is found to effectively retain its electrical conductivity, even when under high strain of ≈200%. To understand the behavior of conductive fillers in the polymer matrix when under mechanical strain, the authors investigate the microstructure of the composite using an in situ small‐angle X‐ray scattering analysis. The authors observe that the HCP produces efficient electrical pathways for filler interconnections upon stretching. The authors develop a stretchable aqueous rechargeable lithium‐ion battery (ARLB) that utilizes this HCP composite as a stretchable current collector. The ARLB exhibits excellent rate capability (≈90 mA h g^?1 at a rate of 20 C) and outstanding capacity retention of 93% after 500 cycles. Moreover, the stretchable ARLB is able to efficiently deliver power even when under 100% strain.     

Sodium Ion Stabilized Vanadium Oxide Nanowire Cathode for High‐Performance Zinc‐Ion Batteries

Aqueous Zn‐ion batteries (ZIBs) have received incremental attention because of their cost‐effectiveness and the materials abundance. They are a promising choice for large‐scale energy storage applications. However, developing suitable cathode materials for ZIBs remains a great challenge. In this work, pioneering work on the designing and construction of aqueous Zn//Na_0.33V₂O₅ batteries is reported. The Na_0.33V₂O₅ (NVO) electrode delivers a high capacity of 367.1 mA h g^?1 at 0.1 A g^?1, and exhibits long‐term cyclic stability with a capacity retention over 93% for 1000 cycles. The improvement of electrical conductivity, resulting from the intercalation of sodium ions between the [V₄O₁₂]_n layers, is demonstrated by single nanowire device. Furthermore, the reversible intercalation reaction mechanism is confirmed by X‐ray diffraction, Raman, X‐ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy analysis. The outstanding performance can be attributed to the stable layered structure and high conductivity of NVO. This work also indicates that layered structural materials show great potential as the cathode of ZIBs, and the indigenous ions can act as pillars to stabilize the layered structure, thereby ensuring an enhanced cycling stability.     

Comparative digestibility of energy and ileal amino acids in yeast extract and spray-dried porcine plasma fed to pigs

Two experiments were conducted to evaluate the digestible (DE) and metabolisable energy (ME), apparent (AID) and standardised ileal digestibility (SID) of amino acids (AA) in yeast extract (YE) and spray-dried porcine plasma (SDPP). In Experiment 1, 18 barrows (25.1 ± 1.2 kg body weight [BW]) were randomly allotted to three treatments with six replicates per treatment. The DE and ME of YE was 20.64 and 19.31 MJ/kg, respectively, which were not significantly different with the DE and ME of SDPP (18.74 and 18.05 MJ/kg, respectively). In Experiment 2, six barrows (20.6 ± 2.6 kg BW) fitted with ileal T-cannulas were fed three diets in a repeated 3-period Latin square design. For Met and Glu, the AID tended to be, while the SID was significantly higher (p < 0.05), in YE than in SDPP. The AID of Cys tended to be lower in YE (p = 0.07), while the SID of Phe tended to be higher in YE than in SDPP (p = 0.06). Accordingly, YE could be a potential substitute for SDPP as a superior protein ingredient in diets for pigs in terms of the available energy and AA digestibility.