Tools,techniques, and future opportunities for characterizing the mechanobiology of uterine myometrium

The myometrium is the smooth muscle layer of the uterus that generates the contractions that drive processes such as menstruation and childbirth. Aberrant contractions of the myometrium can result in preterm birth, insufficient progression of labor, or other difficulties that can lead to maternal or fetal complications or even death. To investigate the underlying mechanisms of these conditions, the most common model systems have conventionally been animal models and human tissue strips, which have limitations mostly related to relevance and scalability, respectively. Myometrial smooth muscle cells have also been isolated from patient biopsies and cultured in vitro as a more controlled experimental system. However, in vitro approaches have focused primarily on measuring the effects of biochemical stimuli and neglected biomechanical stimuli, despite the extensive evidence indicating that remodeling of tissue rigidity or excessive strain is associated with uterine disorders. In this review, we first describe the existing approaches for modeling human myometrium with animal models and human tissue strips and compare their advantages and disadvantages. Next, we introduce existing in vitro techniques and assays for assessing contractility and summarize their applications in elucidating the role of biochemical or biomechanical stimuli on human myometrium. Finally, we conclude by proposing the translation of “organ on chip” approaches to myometrial smooth muscle cells as new paradigms for establishing their fundamental mechanobiology and to serve as next-generation platforms for drug development.     

传粉昆虫下降背景下的授粉生态弹性: 内涵、机制和展望

全球传粉昆虫多样性正在下降, 如何保障农林生态系统传粉功能是当前研究的热点。理论上说, 传粉功能不仅与生态系统的传粉昆虫多样性相关, 还与生态系统的调节能力有关。近年来, 学者们逐渐认识到授粉生态弹性对传粉功能的影响。本文在回顾已有研究的基础之上, 总结传粉昆虫授粉生态弹性的内涵, 厘清授粉生态弹性与工程弹性、稳定性和抗性的异同。目前, 学者对授粉生态弹性形成机制开展广泛探讨, 提出功能冗余假说、密度补偿假说、响应多样性假说、连接周转假说和跨尺度弹性假说, 但这5个假说间的关系仍不清楚, 存在一词多义、词意混淆等现象。我们依次阐述功能冗余假说、密度补偿假说、响应多样性假说、连接周转假说和跨尺度弹性假说, 介绍不同假说中授粉生态弹性形成过程、研究热点和发展动态。通过解析授粉生态弹性的形成机制可知, 5个假说在内涵上存在紧密联系, 它们从不同空间尺度和研究对象下解释传粉昆虫授粉生态弹性的形成机制。未来授粉生态弹性研究将整合传粉昆虫群落动态和传粉功能动态的量化方法, 通过实验验证5个假说的合理性, 并揭示不同假说间的联系, 由此阐明授粉生态弹性的发生条件、形成阈值和动态规律。随着研究的深入, 授粉生态弹性理论有望用于指导农林生态系统传粉功能的经营管理。     

Cascaded valorization of brown seaweed to produce l-lysine and value-added products using Corynebacterium glutamicum streamlined by systems metabolic engineering

Seaweeds emerge as promising third-generation renewable for sustainable bioproduction. In the present work, we valorized brown seaweed to produce l-lysine, the world's leading feed amino acid, using Corynebacterium glutamicum, which was streamlined by systems metabolic engineering. The mutant C. glutamicum SEA-1 served as a starting point for development because it produced small amounts of l-lysine from mannitol, a major seaweed sugar, because of the deletion of its arabitol repressor AtlR and its engineered l-lysine pathway. Starting from SEA-1, we systematically optimized the microbe to redirect excess NADH, formed on the sugar alcohol, towards NADPH, required for l-lysine synthesis. The mannitol dehydrogenase variant MtlD D75A, inspired by 3D protein homology modelling, partly generated NADPH during the oxidation of mannitol to fructose, leading to a 70% increased l-lysine yield in strain SEA-2C. Several rounds of strain engineering further increased NADPH supply and l-lysine production. The best strain, SEA-7, overexpressed the membrane-bound transhydrogenase pntAB together with codon-optimized gapN, encoding NADPH-dependent glyceraldehyde 3-phosphate dehydrogenase, and mak, encoding fructokinase. In a fed-batch process, SEA-7 produced 76 g L⁻¹ l-lysine from mannitol at a yield of 0.26 mol mol⁻¹ and a maximum productivity of 2.1 g L⁻¹ h⁻¹. Finally, SEA-7 was integrated into seaweed valorization cascades. Aqua-cultured Laminaria digitata, a major seaweed for commercial alginate, was extracted and hydrolyzed enzymatically, followed by recovery and clean-up of pure alginate gum. The residual sugar-based mixture was converted to l-lysine at a yield of 0.27 C-mol C-mol⁻¹ using SEA-7. Second, stems of the wild-harvested seaweed Durvillaea antarctica, obtained as waste during commercial processing of the blades for human consumption, were extracted using acid treatment. Fermentation of the hydrolysate using SEA-7 provided l-lysine at a yield of 0.40 C-mol C-mol⁻¹. Our findings enable improvement of the efficiency of seaweed biorefineries using tailor-made C. glutamicum strains.     

A guide to metabolic flux analysis in metabolic engineering: Methods,tools and applications

The field of metabolic engineering is primarily concerned with improving the biological production of value-added chemicals, fuels and pharmaceuticals through the design, construction and optimization of metabolic pathways, redirection of intracellular fluxes, and refinement of cellular properties relevant for industrial bioprocess implementation. Metabolic network models and metabolic fluxes are central concepts in metabolic engineering, as was emphasized in the first paper published in this journal, “Metabolic fluxes and metabolic engineering” (Metabolic Engineering, 1: 1–11, 1999). In the past two decades, a wide range of computational, analytical and experimental approaches have been developed to interrogate the capabilities of biological systems through analysis of metabolic network models using techniques such as flux balance analysis (FBA), and quantify metabolic fluxes using constrained-based modeling approaches such as metabolic flux analysis (MFA) and more advanced experimental techniques based on the use of stable-isotope tracers, i.e. ¹³C-metabolic flux analysis (¹³C-MFA). In this review, we describe the basic principles of metabolic flux analysis, discuss current best practices in flux quantification, highlight potential pitfalls and alternative approaches in the application of these tools, and give a broad overview of pragmatic applications of flux analysis in metabolic engineering practice.     

Active and machine learning-based approaches to rapidly enhance microbial chemical production

In order to make renewable fuels and chemicals from microbes, new methods are required to engineer microbes more intelligently. Computational approaches, to engineer strains for enhanced chemical production typically rely on detailed mechanistic models (e.g., kinetic/stoichiometric models of metabolism)—requiring many experimental datasets for their parameterization—while experimental methods may require screening large mutant libraries to explore the design space for the few mutants with desired behaviors. To address these limitations, we developed an active and machine learning approach (ActiveOpt) to intelligently guide experiments to arrive at an optimal phenotype with minimal measured datasets. ActiveOpt was applied to two separate case studies to evaluate its potential to increase valine yields and neurosporene productivity in Escherichia coli. In both the cases, ActiveOpt identified the best performing strain in fewer experiments than the case studies used. This work demonstrates that machine and active learning approaches have the potential to greatly facilitate metabolic engineering efforts to rapidly achieve its objectives.     

Lung tissue engineering and preservation of alveolar microstructure using a novel casting method

Abstract

We used a rat model to decellularize and seed alveolar cells on a three-dimensional lung scaffold to preserve alveolar microarchitecture. We verified the preservation of terminal respiratory structure by casting and by scanning electron microscopy (SEM) of the casts after decellularization. Whole lungs were obtained from 12 healthy Sprague-Dawley rats, cannulated through the trachea under sterile conditions, and decellularized using a detergent-based method. Casting of both natural and decellularized lungs was performed to verify preservation of the inner microstructure of scaffolds for further cell seeding. Alveolar cell seeding was performed using green fluorescent protein (GFP) lung cells and non-GFP lung cells, and a peristaltic pump. We assessed cell seeding using histological and immunohistochemical staining, and enzymatic evaluation. All cellular components were removed completely from the scaffolds, and histological staining and SEM of casts were used to verify the preservation of tissue structure. Tensile tests verified conservation of biomechanical properties. The hydroxyproline content of decellularized lungs was similar to native lung. Histological and immunohistochemical evaluations showed effective cell seeding on decellularized matrices. Enzymatic measurement of trypsin and alpha 1 antitrypsin suggested the potential functional properties of the regenerated lungs. Casts produced by our method have satisfactory geometrical properties for further cell seeding of lung scaffolds. Preservation of micro-architecture and terminal alveoli that was confirmed by SEM of lung casts increases the probability of an effective cell seeding process.     

The effect of autologous bone marrow stromal cells differentiated on scaffolds for canine tibial bone reconstruction

Bone marrow contains mesenchymal stem cells that form many tissues. Various scaffolds are available for bone reconstruction by tissue engineering. Osteoblastic differentiated bone marrow stromal cells (BMSC) promote osteogenesis on scaffolds and stimulate bone regeneration. We investigated the use of cultured autologous BMSC on different scaffolds for healing defects in tibias of adult male canines. BMSC were isolated from canine humerus bone marrow, differentiated into osteoblasts in culture and loaded onto porous ceramic scaffolds including hydroxyapatite 1, hydroxyapatite gel and calcium phosphate. Osteoblast differentiation was verified by osteonectine and osteocalcine immunocytochemistry. The scaffolds with stromal cells were implanted in the tibial defect. Scaffolds without stromal cells were used as controls. Sections from the defects were processed for histological, ultrastructural, immunohistochemical and histomorphometric analyses to analyze the healing of the defects. BMSC were spread, allowed to proliferate and differentiate to osteoblasts as shown by alizarin red histochemistry, and osteocalcine and osteonectine immunostaining. Scanning electron microscopy showed that BMSC on the scaffolds were more active and adhesive to the calcium phosphate scaffold compared to the others. Macroscopic bone formation was observed in all groups, but scaffolds with stromal cells produced significantly better results. Bone healing occurred earlier and faster with stromal cells on the calcium phosphate scaffold and produced more callus compared to other scaffolds. Tissue healing and osteoblastic marker expression also were better with stromal cells on the scaffolds. Increased trabecula formation, cell density and decreased fibrosis were observed in the calcium phosphate scaffold with stromal cells. Autologous cultured stromal cells on the scaffolds were useful for healing of canine tibial bone defects. The calcium phosphate scaffold was the best for both cell differentiation in vitro and bone regeneration in vivo. It may be possible to improve healing of bone defects in humans using stem cells from bone marrow.     

Preferred step frequency during downhill running may be determined by muscle activity

It is well established that metabolic cost is minimized at an individual’s running preferred step frequency (PSF). It has been proposed that the metabolic minimum at PSF is due to a tradeoff between mechanical factors, however, this ignores muscle activity, the primary consumer of energy. Thus, we hypothesized that during downhill running, total muscle activity would be greater with deviations from PSF. Specifically, we predicted that slow step frequencies would have greater stance activity while fast step frequencies would have greater swing activity. We collected metabolic cost and leg muscle activity data while 10 healthy young adults ran at 3.0 m/s for 5 min at level and downhill at PSF and ±15% PSF. In support of our hypothesis, there was a significant main effect for step frequency for both metabolic cost and total muscle activity. In addition, there was greater muscle activity in the stance phase during the slower step frequency while muscle activity was greater in the swing phase during the fast step frequency. This suggests that PSF is partially determined by the tradeoff between the greater cost of muscle activity in the swing phase and lower cost in the stance phase with faster step frequency.     

Mutations of Thr169 affect substrate specificity of pyranose 2-oxidase from Trametes multicolor

Site-directed mutagenesis was used to enhance the catalytic activity of pyranose 2-oxidase (P2Ox) from Trametes multicolor with different substrates. To this end, threonine at position 169 was replaced by glycine, alanine and serine, respectively. Using oxygen as electron acceptor the mutant T169G was equally active with d-glucose and d-galactose, whereas wild-type recombinant P2Ox only showed 5.2% relative activity with the latter substrate. When d-galactose was used as electron donor in saturating concentrations, T169G showed a 4.5-fold increase in its catalytic efficiency k_cat/K_M for the alternative electron acceptor 1,4-benzoquinone and a nine-fold increased k_cat/K_M value with the ferricenium ion compared with wt recP2Ox. Variant T169S showed an increase in its catalytic efficiency both with 1,4-benzoquinone (3.7 times) as well as with the ferricenium ion (1.4 times) when d-glucose was the substrate.