6周不同强度间歇性运动对肥胖大鼠体成分的影响*

目的:探讨不同强度间歇性运动对肥胖大鼠身体机能影响,为肥胖症的防治提供依据。方法:80只SD大鼠随机分成普通膳食组(n=20)和高脂膳食组(n=60),适应性喂养8周后,筛选普通膳食大鼠8只和高脂膳食肥胖大鼠32只,用于后续实验。将实验大鼠随机分为5组(n=8):普通对照组(CS),普通饲料喂养,不做任何运动;高脂安静组(HS):高脂饲料喂养,不作任何运动;高脂持续运动组(HC):进行60 min/d×5天/周×6周;高脂长时间低频率间歇性运动组(HLL):进行30 min/次×2次/天(间歇6 h)×5天/周×6周;高脂短时间高频率间歇性运动组(HSH):进行20 min/次×3次/天(间歇3 h)×5天/周×6周,各运动组大鼠在跑台上训练强度均为25 m/min。6周后,各组大鼠称重、检测RMR、FBG、TG等生化指标,并测量体脂及肌肉重量。结果:实验前,各组大鼠之间RMR、FBG、TG指标无统计学差异(P＞0.05);HSH、HLL、HC、HS组体重均明显高于CS组(P＜0.05)。实验后,HSH、HLL、HC组RMR均明显高于HS、CS组(P＜0.05),但HSH、HLL、HC组之间无显著性差异(P＞0.05);HS组体重高于CS组(P＜0.05),HSH、HLL、HC组体重明显低于HS组(P＜0.05),但三组之间无显著性差异(P＞0.05);HSH、HLL、HC组之间PF、EF、PF/W、EF/W均明显低于HS组(P＜0.01),而三者之间无统计学差异(P＞0.05);各组大鼠GM、QF均无显著性差异(P＞0.05),HSH、HLL、HC组之间GM/W、QF/W高于HS组(P＜0.05),而HSH、HLL、HC组之间无显著性差异(P＞0.05);HSH、HLL、HC组FBG、TG均明显低于CS、HS组(P＜0.05),但与HS组差异更显著(P＜0.01),而各训练组之间无显著性差异(P＞0.05)。结论:6周不同强度间歇性运动对肥胖大鼠体成分产生了良好的干预效果,且短时间高频率间歇性运动(HSH)效果可能更好。     

Estimating the energy expenditure of free‐ranging polar bears using tri‐axial accelerometers: A validation with doubly labeled water

Measures of energy expenditure can be used to inform animal conservation and management, but methods for measuring the energy expenditure of free‐ranging animals have a variety of limitations. Advancements in biologging technologies have enabled the use of dynamic body acceleration derived from accelerometers as a proxy for energy expenditure. Although dynamic body acceleration has been shown to strongly correlate with oxygen consumption in captive animals, it has been validated in only a few studies on free‐ranging animals. Here, we use relationships between oxygen consumption and overall dynamic body acceleration in resting and walking polar bears Ursus maritimus and published values for the costs of swimming in polar bears to estimate the total energy expenditure of 6 free‐ranging polar bears that were primarily using the sea ice of the Beaufort Sea. Energetic models based on accelerometry were compared to models of energy expenditure on the same individuals derived from doubly labeled water methods. Accelerometer‐based estimates of energy expenditure on average predicted total energy expenditure to be 30% less than estimates derived from doubly labeled water. Nevertheless, accelerometer‐based measures of energy expenditure strongly correlated (r² = 0.70) with measures derived from doubly labeled water. Our findings highlight the strengths and limitations in dynamic body acceleration as a measure of total energy expenditure while also further supporting its use as a proxy for instantaneous, detailed energy expenditure in free‐ranging animals.     

Membrane fusogenic lysine type lipid assemblies possess enhanced NLRP3 inflammasome activation potency

Lysine (K) type cationic lipid with a propyl spacer and ditetradecyl hydrophobic moieties composing liposomes, K3C14, previously studied for gene delivery, were reported to activate the NLRP3 inflammasomes in human macrophages via the conventional phagolysosomal pathway. In this study, K3C16, a propyl spacer bearing lysine type lipids with dihexadecyl moieties (an extension of two hydrocarbon tail length) were compared with K3C14 as liposomes. Such a small change in tail length did not alter the physical properties such as size distribution, zeta potential and polydispersity index (PDI). The NLRP3 activation potency of K3C16 was shown to be 1.5-fold higher. Yet, the toxicity was minimal, whereas K3C14 has shown to cause significant cell death after 24 h incubation. Even in the presence of endocytosis inhibitors, cytochalasin D or dynasore, K3C16 continued to activate the NLRP3 inflammasomes and to induce IL-1β release. To our surprise, K3C16 liposomes were confirmed to fuse with the plasma membrane of human macrophages and CHO-K1 cells. It is demonstrated that the change in hydrophobic tail length by two hydrocarbons drastically changed a cellular entry route and potency in activating the NLRP3 inflammasomes.     

Young adult cancer incidence trends in Taiwan and the U.S. from 2002 to 2016

BackgroundPrevious studies have not examined young adult cancer incidence trends in Taiwan, or comprehensively compared these trends at two nations with different population genetics, environmental exposures, and health care. Therefore, we compared the incidence rates and trends of the most common young adult cancers diagnosed at 20–39 years of age in Taiwan and the U.S.MethodsIncidence rates from 2002 to 2016 were calculated from the Taiwan National Health Insurance Research Datasets and the U.S. Surveillance, Epidemiology, and End Results Program. For trend assessment, average annual percent change (AAPC) values were calculated from 15 years of data using Joinpoint Regression Program. We also obtained sex or age of diagnosis stratified estimates.ResultsThe age-standardized overall young adult cancer incidence rate significantly increased from 2002 to 2016 in both Taiwan (AAPC=1.1%, 95% CI: 0.8–1.5%) and the U.S. (AAPC=1.8%, 95% CI: 1.1–2.4%). Cancers with significantly decreasing trends in Taiwan included cancers of the nasopharynx, liver, and tongue, which were not among the most common young adult cancers in the U.S. Cancers with significantly increasing trends in both Taiwan and the U.S. included colorectal, thyroid, and female breast cancers. Lymphoma, ovarian cancer, and lung and bronchus cancer had significantly increasing trends in Taiwan but not in the U.S. Although cervical cancer had significantly decreasing trends in both nations among those 30–39 years of age, its trend was significantly increasing in Taiwan but decreasing in the U.S. among those 20–29 years of age.ConclusionThe types of common young adult cancers as well as their incidence rates and trends differed in Taiwan and the U.S. Future studies should further understand the etiological factors driving these trends.     

Estimation of Respiratory Nasal Pressure and Flow Rate Signals Using Different Respiratory Sound Features

BackgroundRespiratory sounds are associated with the flow rate, nasal flow pressure, and physical characteristics of airways. In this study, we aimed to develop the flow rate and nasal flow pressure estimation models for the clinical application, and find out the optimal feature set for estimation to achieve the optimal model performance.MethodsRespiratory sounds and flow rate were acquired from nine healthy volunteers. Respiratory sounds and nasal flow pressure were acquired from twenty-three healthy volunteers. Four types of respiratory sound features were extracted for flow rate and nasal flow pressure estimation using different estimation models. Effects of estimations using these features were evaluated using Bland-Altman analysis, estimation error, and respiratory sound feature calculation time. Besides, expiratory and inspiratory phases divided estimation errors were compared with united estimation errors.ResultsThe personalized logarithm model was selected as the optimal flow rate estimation model. Respiratory nasal flow pressure estimation based on this model was also performed. For the four different respiratory sound features, there is no statistically significant difference in flow rate and pressure estimation errors. LogEnvelope was, therefore, chosen as the optimal feature because of the lowest computational cost. In addition, for any type of respiratory sound feature, no statistically significant difference was observed between divided and united estimation errors (flow rate and pressure).ConclusionRespiratory flow rate and nasal flow pressure can be estimated accurately using respiratory sound features. Expiratory and inspiratory phases united estimation using respiratory sounds is a more reasonable estimation method than divided estimation. LogEnvelope can be used for this united respiratory flow rate and nasal flow pressure estimation with minimum computational cost and acceptable estimation error.     

Preferential retention of the slowly evolving gene in pairs of duplicates in angiosperm genomes

Gene duplication provides raw material for functional innovation, but gene duplicability varies considerably. Previous studies have found widespread asymmetrical sequence evolution between paralogs. However, it remains unknown whether the rate of evolution among paralogs affects their propensity of being retained after another round of whole-genome duplication (WGD). In this study, we investigated gene groups that have experienced two successive WGDs to determine which of two older duplicates with different evolutionary rates was more likely to retain both younger duplicates. To uncouple the measurement of evolutionary rates from any assignment of duplicate or singleton status, we measured the evolutionary rates of singleton genes in out-lineages but classified these singleton genes according to whether they are retained or not in a crown group of species. We found that genes that retained younger duplicates in the crown group of genomes were more constrained prior to the younger duplication event than those that failed to leave duplicates. In addition, we also found that the retained clades have more genes in out-lineages. Subsequent analyses showed that genes in the retained clades were expressed more broadly and highly than genes in the singleton clades. We concluded that the set of repeatedly retained genes after two WGDs is biased toward slowly evolving genes in angiosperms, suggesting that the potential of genes for both functional conservation and divergence likely affects their propensity of being retained after WGD in angiosperms.     

Effects of shear stress on 3-D human mesenchymal stem cell construct development in a perfusion bioreactor system: Experiments and hydrodynamic modeling

Shear stress is an important biomechanical parameter in regulating human mesenchymal stem cell (hMSC) construct development. In this study, the biomechanical characteristics of hMSCs within highly porous 3-D poly (ethylene terephthalate) (PET) matrices in a perfusion bioreactor system were analyzed for two flow rates of 0.1 and 1.5 mL/min, respectively over a 20-day culture period. A 1.4 times higher proliferation rate, higher CFU-F formation, and more fibronectin and HSP-47 secretion at day 20 were observed at the flow rate of 0.1 mL/min compared to those at the flow rate of 1.5 mL/min. The higher flow rate of 1.5 mL/min upregulated osteogenic differentiation potential at day 20 as measured by the expression of alkaline phosphatase activity and calcium deposition in the matrix after 14 days osteogenic induction, consistent with those reported in literatures. Mathematical modeling indicated that shear stress existed in the range of 1 x 10(-5) to 1 x 10(-4) Pa in the constructs up to a depth of 70 microm due to flow penetration in the porous constructs. Analysis of oxygen transport in the constructs for the two flow rates yielded oxygen levels significantly higher than those at which cell growth and metabolism are affected (Jiang et al., 1996). This indicates that differences in convective transport have no significant influence on cell growth and metabolism for the range of flow rates studied. These results demonstrate that shear stress is an important microenvironment parameter that regulates hMSC construct development at a range significantly lower than those reported previously in the perfusion system.     

A stirred microchamber for oxygen consumption rate measurements with pancreatic islets

Improvements in pancreatic islet transplantation for treatment of diabetes are hindered by the absence of meaningful islet quality assessment methods. Oxygen consumption rate (OCR) has previously been used to assess the quality of organs and primary tissue for transplantation. In this study, we describe and characterize a stirred microchamber for measuring OCR with small quantities of islets. The device has a titanium body with a chamber volume of about 200 microL and is magnetically stirred and water jacketed for temperature control. Oxygen partial pressure (pO(2)) is measured by fluorescence quenching with a fiber optic probe, and OCR is determined from the linear decrease of pO(2) with time. We demonstrate that measurements can be made rapidly and with high precision. Measurements with betaTC3 cells and islets show that OCR is directly proportional to the number of viable cells in mixtures of live and dead cells and correlate linearly with membrane integrity measurements made with cells that have been cultured for 24 h under various stressful conditions.     

Oxygen uptake rates and liver-specific functions of hepatocyte and 3T3 fibroblast co-cultures

Bioartificial liver (BAL) devices have been developed to treat patients undergoing acute liver failure. One of the most important parameters to consider in designing these devices is the oxygen consumption rate of the seeded hepatocytes which are known to have oxygen consumption rates 10 times higher than most other cell types. Hepatocytes in various culture configurations have been tested in BAL devices including those formats that involve co-culture of hepatocytes with other cell types. In this study, we investigated, for the first time, oxygen uptake rates (OUR)s of hepatocytes co-cultured with 3T3-J2 fibroblasts at various hepatocyte to fibroblast seeding ratios. OURs were determined by measuring the rate of oxygen disappearance using a ruthenium-coated optical probe after closing and sealing the culture dish. Albumin and urea production rates were measured to assess hepatocyte function. Lower hepatocyte density co-cultures demonstrated significantly higher OURs (2 to 3.5-fold) and liver- specific functions (1.6-fold for albumin and 4.5-fold for urea production) on a per cell basis than those seeded at higher densities. Increases in OUR correlated well with increased liver-specific functions. OURs (V(m)) were modeled by fitting Michaelis-Menten kinetics and the model predictions closely correlated with the experimental data. This study provides useful information for predicting BAL design parameters that will avoid oxygen limitations, as well as maximize metabolic functions.