Sustainable, High-Yielding Outdoor Mass Cultures of Chaetoceros muelleri var. subsalsum and Isochrysis galbana in Vertical Plate Reactors

Continuous cultures of Chaetoceros muelleri and Isochrysis galbana were grown outdoors in flat plate-glass reactors in which light-path length (LPL) varied from 5 to 30 cm. High daily productivity (13 to 16 g cell mass per square meter of irradiated reactor surface) for long periods of time was obtained in reactors in which the optical path as well as cell density were optimized. 'Twenty centimeters was the optimal LPL, yielding the highest areal productivity of cell mass (g m^–2d^–1), eicosapentaenoic acid, and docosahexaenoic acid, which was identical with that previously found for polysaccharide production of Porphyridium and not far from the optimal LPL affecting maximal productivity in Nannochloropsis species. Relating the energy impinging on a given reactor surface area to the appropriate number of cells showed that the most efficient light dose per cell, obtained with the 20-cm LPL reactor, was approximately 2.5 times lower than the light dose available per cell in the 5-cm LPL reactor, in which a significant decline in areal cell density accompanied the lowest areal output of cell mass. The most effective harvesting regimen was in the range of 10% to 15% of culture volume harvested daily and replaced with fresh growth medium, resulting in a sustainable culture density of 24 × 10⁶ and 28 × 10⁶ cells/ml of C. muelleri and I. galbana, respectively.     

The dynamin-like protein ADL1C is essential for plasma membrane maintenance during pollen maturation

Dynamin-related GTPases regulate a wide variety of dynamic membrane processes in eukaryotes. Here, we investigated the function of ADL1C, a member of the Arabidopsis 68 kDa dynamin-like protein family. Analysis of heterozygous adl1C-1 indicates that the mutation specifically affects post-meiotic male gametogenesis. Fifty percent of the mature pollen from heterozygous adl1C-1 androecia are shriveled and fail to germinate in vitro. During microspore maturation, adl1C-1 pollen grains display defects in the plasma membrane and intine morphology, suggesting that ADL1C is essential for the formation and maintenance of the pollen cell surface and viability during desiccation. Consistent with a role in cell-surface dynamics, immunofluorescence microscopy indicates that ADL1C is localized to the cell plate of dividing somatic cells and to the tip of expanding root hairs. We propose that ADL1C functions in plasma membrane dynamics, and we discuss the role of the ADL1 family in plant growth and development.     

CRIM1, a novel gene encoding a cysteine-rich repeat protein, is developmentally regulated and implicated in vertebrate CNS development and organogenesis

Development of the vertebrate central nervous system is thought to be controlled by intricate cell-cell interactions and spatio-temporally regulated gene expressions. The details of these processes are still not fully understood. We have isolated a novel vertebrate gene, CRIM1/Crim1, in human and mouse. Human CRIM1 maps to chromosome 2p21 close to the Spastic Paraplegia 4 locus. Crim1 is expressed in the notochord, somites, floor plate, early motor neurons and interneuron subpopulations within the developing spinal cord. CRIM1 appears to be evolutionarily conserved and encodes a putative transmembrane protein containing an IGF-binding protein motif and multiple cysteine-rich repeats similar to those in the BMP-associating chordin and sog proteins. Our results suggest a role for CRIM1/Crim1 in CNS development possibly via growth factor binding.     

In vitro axial preload application during spine flexibility testing: towards reduced apparatus-related artefacts

Presently, there is little consensus about how, or even if, axial preload should be incorporated in spine flexibility tests in order to simulate the compressive loads naturally present in vivo. Some preload application methods are suspected of producing unwanted “artefact” forces as the specimen rotates and, in doing so, influencing the resulting kinematics. The objective of this study was to quantitatively compare four distinct types of preload which have roots in contemporary experimental practice. The specific quantities compared were the reaction moments and forces resulting at the intervertebral disc and specimen kinematics. The preload types incorporated increasing amounts of caudal constraint on the preload application vector ranging from an unconstrained dead-load arrangement to an apparatus that allowed the vector to follow rotations of the specimen. Six human cadaveric spine segments were tested (1-L1/L2, 3-L2/L3, 1-L3/L4 and 1-L4/L5). Pure moments were applied to the specimens with each of the four different types of compressive preload. Kinematic response was measured using an opto-electronic motion analysis system. A six-axis load cell was used to measure reaction forces and moments. Artefact reaction moments and shear forces were significantly affected by preload application method and magnitude. Unconstrained preload methods produced high artefact moments and low artefact shear forces while more constrained methods did the opposite. A mechanical trade-off is suggested by our results, whereby unwanted moment can only be prevented at the cost of shear force production. When comparing spine flexibility studies, caution should be exercised to ensure preload was applied in a similar manner for all studies. Unwanted moments or forces induced as a result of preload application method may render the comparison of two seemingly similar studies inappropriate.     

Cytokinesis and nodal anatomy in the charophycean green algaChara zeylanica

Summary Cell plate formation inChara zeylanica was compared with recent models of cytokinesis in higher plants in order to gain insight into the evolutionary origin of plant cytokinetic processes. Transmission electron microscopy (TEM) reveals that while cytokinesis inC. zeylanica bears many features in common with that in higher plants, there are significant differences. Unlike that in higher plants, cytokinesis inC. zeylanica begins with a congregation of smooth membrane tubules that are closely associated with endoplasmic reticulum (ER) and Golgi membranes. Mitochondria and other organelles excluded by the phragmoplast in higher plants are present as well. Unlike in higher plants, phragmoplast microtubules persist throughout cytokinesis inC. zeylanica, and the cell plate generally forms across the whole cell at once, though development is patchy, due to small regions developing at different rates; the ends of the plate form last. By identifying aspects of cytokinesis that are different inC. zeylanica and plants, our study indicates which cytokinetic features are more likely to be derived, and which are more likely to be ancestral. In addition, we demonstrated that all nodal cells ofC. zeylanica are interconnected via plasmodesmata, lending support to the idea that, whileChara spp. are generally considered to be filamentous organisms, nodal regions may be thought of as meristemlike tissues.Abbreviations HPF high-pressure freezing - KFe potassium ferricyanide - SCF stepwise chemical fixation - TEM transmission electron microscopy     

Comparison of plate count agar and R2A medium for enumeration of heterotrophic bacteria in natural mineral water

In order to recover as many viable bacteria as possible from natural mineral water, in this study we have compared the counts obtained with the standard method (pour plate procedure with Plate Count Agar (PCA)) and counts with alternative test methods (PCA/spread plates, R2A medium/pour plates and R2A medium/spread plates). The results showed that counts with R2A medium/spread plates at 22°C and after a 7-day incubation period were more than 343% higher than those obtained with PCA/pour plate method. At 37°C and after a 3-day incubation period, the R2A pour plate technique gave counts about 368% greater than for the standard method. Moreover, while Pseudomonas, Comamonas and Acinetobacter species were isolated both from PCA and R2A medium, Flavobacterium spp. and Arthrobacter spp. were isolated only from R2A medium. For its higher productivity, R2A medium should be recommended for heterotrophic plate counts in natural mineral water.