Somatic embryogenesis in Flax

Callus was initiated from hypocotyl explants of three elite varieties of Linum usitatissimum L. on Murashige and Skoog (MS) medium supplemented with various growth regulators. Somatic embryos differentiated from callus grown on MS + α-naphthaleneacetic acid. The origin from a single cell and subsequent developmental stages was traced. Embryos developed into normal plants upon transfer to MS + 2.69 μM α-naphthaleneacetic acid + 2.22 μM 6-benzyladenine in two varieties. The medium was supplemented with several additives (abscisic acid, glycine, lysine, glutamine and casein hydrolysate) to increase the percentage of normal plant development from embryos; none of the additives could promote the growth of the shoot apex. This revised version was published online in August 2006 with corrections to the Cover Date.     

Genomic regions underlying agronomic traits in linseed (Linum usitatissimum L.) as revealed by association mapping OA简

The extreme climate of the Canadian Prairies poses a major challenge to improve yield. Although it is possible to breed for yield per se, focusing on yield‐related traits could be advantageous because of their simpler genetic architecture. The Canadian flax core collection of 390 accessions was genotyped with 464 simple sequence repeat markers, and phenotypic data for nine agronomic traits including yield, bolls per area, 1,000 seed weight, seeds per boll, start of flowering, end of flowering, plant height, plant branching, and lodging collected from up to eight environments was used for association mapping. Based on a mixed model (principal component analysis (PCA) + kinship matrix (K)), 12 significant marker‐trait associations for six agronomic traits were identified. Most of the associations were stable across environments as revealed by multivariate analyses. Statistical simulation for five markers associated with 1000 seed weight indicated that the favorable alleles have additive effects. None of the modern cultivars carried the five favorable alleles and the maximum number of four observed in any accessions was mostly in breeding lines. Our results confirmed the complex genetic architecture of yield‐related traits and the inherent difficulties associated with their identification while illustrating the potential for improvement through marker‐assisted selection.     

Induced variations in quantitative traits by EMS and SA treatments in Linum usitatissimum L.

The Linum usitatissimum L. var.NDL-2002 has high oil yield potential. The seeds of the variety were exposed to different concentrations (0.02–0.10%) of ethyl methane sulphonate (EMS) and sodium azide (SA). Observations on germination, germination inhibition, morphology, plant height, yield parameters, branches per plant, etc. were recorded in M1 generation in control and treated plants. Leaves notching, effect on internodal length were observed and also the more adverse effect of EMS was observed than SA.     

Effects of sulphur dioxide preservation of flax straw on fibre components and microbial colonisation during dew-retting

The changes in flax straw structure when treated with sulphur dioxide (SO₂) and consequent effect on dew-retting of the treated straw were investigated. The active oxoanions released by sulfurous acid degraded phenolics bound to the polysaccharides and lipids leading to an increase in water-soluble carbohydrates and polyphenols. As a result, proportions of hemicellulose, nitrogen, sulphur, ash and caustic weight loss were higher in treated straw while lipid was reduced. The coarseness of treated fibre was possibly caused by in situ dryback of the hydrolysed polysaccharides. The deposition of salts containing high concentrations of sulphur, calcium and potassium in the vicinity of the fibre bundles and epidermal layer was observed and investigated. In a dew-retting trial comprising SO₂-treated and untreated samples, the SO₂ treatment delayed microbial colonisation and, consequently, retting by nearly 2 wk compared to the controls. The changes in pH, fungal population and polysaccharide degrading enzymes were monitored. The differences in fibre yield, fineness and strength are presented.     

Developing genomic resources in two Linum species via 454 pyrosequencing and genomic reduction

Recent advances in next-generation DNA sequencing (NGS) have enhanced the development of genomic resources such as contigs or single-nucleotide polymorphisms (SNPs) for evolutionary studies of a nonmodel species with a complex and unsequenced genome. This study presents an application of a NGS technique in combination with genomic reduction and advanced bioinformatics tools to identify contigs and SNPs from multiple samples of two Linum species. A full Roche 454 GS FLX run of 16 diverse Linum samples representing cultivated flax (Linum usitatissimum L.) and its wild progenitor (Linum bienne Mill.) generated approximately 1.6 million sequence reads with a total length of 498 Mbp. Application of the computational pipeline de novo identification of alleles identified 713 contigs and 1067 SNPs. A blast search revealed alignments of all 713 contigs with 491 existing Linum scaffolds and gene annotations associated with 512 contigs. Sanger sequencing confirmed 95% of 79 selected contigs and 94% of 272 SNPs and identified 211 new SNPs and 19 new indels. The scored 454 SNP data were highly imbalanced for assayed samples. These findings not only are useful for evolutionary studies of Linum species but also help to illustrate the utility of NGS technologies in SNP discovery for nonmodel organisms.     

The Effect of a Submersion Pretreatment on In Vitro Explant Growth and Shoot Regeneration from Hypocotyls of Flax (Linum Usitatissimum)

This study was carried out to determine the effect of temporary submersion of hypocotyl segments in water on in vitro explant growth and shoot regeneration on MS (Murashige and Skoog, 1962) medium supplemented with 1 mg l⁻¹ BAP (6-benzylaminopurine) and 0.02 mg l⁻¹ NAA (naphthaleneacetic acid) in three flax cultivars. It was observed that water-treated hypocotyl explants gave rise to the highest values with respect to shoot regeneration percentage, shoot number per hypocotyl, shoot length and total shoot number per Petri dish, successful rooting and plantlet establishment. This procedure may be applicable for other species cultured in vitro.     

Building flax fibres: more than one brick in the walls

The objective of the review is to provide fundamental knowledge on the chemical composition and structural characteristics of flax fibres. These are long and multinucleate cells without septum or partition (average length 2–5 cm) and have a secondary wall of very large thickness (5–15 μm). Fibres are gathered in bundles of one to three dozen cells that encircle the vascular cylinder. The bundle cohesion is insured by pectins, accumulating in the primary wall and cell junctions. In contrast, lignin, which is present in very low amount, does not seem to play a major role in bundle cohesion. At maturity, secondary wall is characterised by (i) a high level of cellulose with microfibrils locked into an almost axial direction and (ii) 5–15% non-cellulosic polysaccharides (NCPs). The chemical composition of NCPs depends on growth stage, indicating important cell wall remodelling, fibre position and variety. Despite the large disparity of the results reported in the literature, galactose appears to be the predominant sugar of NCPs, and β-1-4-galactan together with rhamnogalacturonan of type I (RG-I) and polygalacturonic acid (PGA) become, with fibre maturity, the most abundant tightly bound NCPs. Glycine-rich proteins (GRPs) and arabinogalactan-proteins (AGPs), also present in flax fibres, are both characterised by appreciable levels of glycine and acidic amino acid and are deficient in hydroxyproline, and may contribute to the cross-linking of pectins. (Galacto)glucomanans/glucans rather than xylans consist of cross-linking polymers in fibre secondary wall. A model is proposed where cellulose microfibrils, tethered by cross-linking (galacto)glucomanans/glucans, are embedded in a pectic matrix.     

Cadmium uptake and bioaccumulation in selected cultivars of durum wheat and flax as affected by soil type

Accumulation of cadmium (Cd) in crop plants is of great concern due to the potential for food chain contamination through the soil-root interface. Although Cd uptake varies considerably with plant species, the processes which determine the accumulation of Cd in plant tissues are affected by soil factors. The influence of soil type on Cd uptake by durum wheat (Triticum turgidum var. durum L.) and flax (Linum usitatissimum L.) was studied in a pot experiment under environmentally controlled growth chamber conditions. Four cultivars/lines of durum wheat (Kyle, Sceptre, DT 627, and DT 637) and three cultivars/lines of flax (Flanders, AC Emerson, and YSED 2) were grown in two Saskatchewan soils: an Orthic Gray Luvisol (low background Cd concentration; total/ABDTPA extractable Cd: 0.12/0.03 mg kg^-1, respectively) and a Dark Brown Chernozem (relatively high background Cd concentration; total/ABDTPA Cd: 0.34/0.17 mg kg^-1 respectively). Plant roots, stems, newly developed heads, and grain/seeds were analyzed for Cd concentration at three stages of plant growth: two and seven weeks after germination, and at plant maturity. The results showed that Cd bioaccumulation and distribution within the plants were strongly affected by both soil type and plant cultivar/line. The Cd concentration in roots leaves and stems varied at different stages of plant growth. However, all cultivars of both plant species grown in the Chernozemic soil accumulated more Cd in grain/seeds than plants grown in the Orthic Gray Luvisol soil. The different Cd accumulation pattern also corresponded to the levels of ABDTPA extractable and metal-organic complex bound soil Cd found in both soils. Large differences were found in grain Cd among the durum wheat cultivars grown in the same soil type, suggesting the importance of rhizosphere processes in Cd bioaccumulation and/or Cd transport processes within the plant. Distribution of Cd in parts of mature plants showed that durum grain contained up to 21 and 36% of the total amount of Cd taken up by the plants for the Orthic Gray Luvisol and Chernozemic soils, respectively. These results indicate the importance of studying Cd speciation, bioaccumulation and cycling in the environment for the management of agricultural soils and crops.     

Distribution of selected elements within flax plants as affected by FeEDDHA

Summary Flax growing on a calcareous soil in the greenhouse developed Mn toxicity symptoms. The toxicity was eliminated by application of 2 ppm FeEDDHA-Fe. FeEDDHA had major effects on distribution of Mn, Zn, Fe and P among selected plant parts. Application of the chelate reduced Mn concentration in older leaves, the tissue most susceptible to Mn toxicity, associated stem tissue, plant tops, and roots from 2295 to 133 ppm, 62 to 7 ppm, 550 to 34 ppm, and 42 to 34 ppm, respectively. Analysis of older leaves is recommended for diagnosing Mn toxicity in flax.FeEDDHA reduced Zn concentration in plant tops and this was chiefly reflected in greatly reduced leaf concentrations, especially in older leaves. FeEDDHA increased plant Fe concentration and the effect was greatest in root and older leaf tissues. The overall effect of FeEDDHA on P concentration was small but large increases occurred in younger leaf tissue due to application of the chelate. Relative distributions of K, Na, Ca, and Mg among plant parts were only slightly affected by FeEDDHA.