Effectiveness of host cell protein removal using depth filtration with a filter containing diatomaceous earth

The increased cell density and product titer in biomanufacturing have led to greater use of depth filtration as part of the initial clarification of cell culture fluid, either as a stand-alone unit operation or after centrifugation. Several recent studies have shown that depth filters can also reduce the concentration of smaller impurities like host cell proteins (HCP) and DNA, decreasing the burden on subsequent chromatographic operations. The objective of this study was to evaluate the HCP removal properties of the Pall PDH4 depth filter media, a model depth filter containing diatomaceous earth, cellulose fibers, and a binder. Experiments were performed with both cell culture fluid (CCF) and a series of model proteins with defined pI, molecular weight, and hydrophobicity chosen to match the range of typical HCP. The location of adsorbed (fluorescently labeled) proteins within the depth filters was determined using confocal scanning laser microscopy. Protein binding was greater for proteins that were positively charged and more hydrophobic, consistent with adsorption to the negatively charged diatomaceous earth. The lowest degree of binding was seen with proteins near their pI, which were poorly removed by this filter. These results provide new mechanistic insights into the factors governing the filter capacity and performance characteristics of depth filters containing diatomaceous earth that are widely used in the clarification of CCF.     

Optimization of culture media to enhance the growth of tissue engineered cartilage

Tissue engineering is a promising option for cartilage repair. However, several hurdles still need to be overcome to develop functional tissue constructs suitable for implantation. One of the most common challenges is the general low capacity of chondrocytes to synthesize cartilage-specific extracellular matrix (ECM). While different approaches have been explored to improve the biosynthetic response of chondrocytes, several studies have demonstrated that the nutritional environment (e.g., glucose concentration and media volume) can have a profound effect on ECM synthesis. Thus, the purpose of this study was to optimize the formulation of cell culture media to upregulate the accumulation of cartilaginous ECM constituents (i.e., proteoglycans and collagen) by chondrocytes in 3D culture. Using response surface methodology, four different media factors (basal media, media volume, glucose, and glutamine) were first screened to determine optimal media formulations. Constructs were then cultured under candidate optimal media formulations for 4 weeks and analyzed for their biochemical and structural properties. Interestingly, the maximal accumulation of proteoglycans and collagen appeared to be elicited by different media formulations. Most notably, proteoglycan accumulation was favored by high volume, low glucose-containing DMEM/F12 (1:1) media whereas collagen accumulation was favored by high volume, high glucose-containing F12 media. While high glutamine-containing media elicited increased DNA content, glutamine concentration had no apparent effect on ECM accumulation. Therefore, optimizing the nutritional environment during chondrocyte culture appears to be a promising, straight-forward approach to improve cartilaginous tissue formation. Future work will investigate the combined effects of the nutritional environment and external stimuli.     

Analysis of chemometric models applied to Raman spectroscopy for monitoring key metabolites of cell culture

The Food and Drug Administration (FDA) initiative of Process Analytical Technology (PAT) encourages the monitoring of biopharmaceutical manufacturing processes by innovative solutions. Raman spectroscopy and the chemometric modeling tool partial least squares (PLS) have been applied to this aim for monitoring cell culture process variables. This study compares the chemometric modeling methods of Support Vector Machine radial (SVMr), Random Forests (RF), and Cubist to the commonly used linear PLS model for predicting cell culture components—glucose, lactate, and ammonia. This research is performed to assess whether the use of PLS as standard practice is justified for chemometric modeling of Raman spectroscopy and cell culture data. Model development data from five small-scale bioreactors (2 × 1 L and 3 × 5 L) using two Chinese hamster ovary (CHO) cell lines were used to predict against a manufacturing scale bioreactor (2,000 L). Analysis demonstrated that Cubist predictive models were better for average performance over PLS, SVMr, and RF for glucose, lactate, and ammonia. The root mean square error of prediction (RMSEP) of Cubist modeling was acceptable for the process concentration ranges of glucose (1.437 mM), lactate (2.0 mM), and ammonia (0.819 mM). Interpretation of variable importance (VI) results theorizes the potential advantages of Cubist modeling in avoiding interference of Raman spectral peaks. Predictors/Raman wavenumbers (cm⁻¹) of interest for individual variables are X1139–X1141 for glucose, X846–X849 for lactate, and X2941–X2943 for ammonia. These results demonstrate that other beneficial chemometric models are available for use in monitoring cell culture with Raman spectroscopy.     

Establishment of <i>Rhodiola quadrifida</i> Hairy Roots and Callus Culture to Produce Bioactive Compounds

Rhodiola quadrifida is a rare mountain medicinal plant whose root extracts are used in traditional Chinese medicine as a hemostatic, antitussive, and tonic in the treatment of gynecological diseases. The aim of the study was to obtain R. quadrifida cultures at different degrees of differentiation in vitro and compare their growth characteristics and the content of salidroside and rosavin. Hairy roots were obtained by incubating cotyledons and hypocotyls in a suspension of Agrobacterium rhizogenes strain A4. The presence of the rolB and rolC genes was proven by polymerase chain reaction. The obtained roots were cultivated in Murashige-Skoog medium (MS). Calluses were obtained from the hairy roots in MS medium with the addition of hormones: 3 mg/L 2,4 D and 0.5 mg/L BAP. The presence of the main secondary metabolites of R. quadrifida, salidroside and rosavin, in calluses and salidroside in hairy roots by HPLC/MS was confirmed. The content of salidroside in callus culture was significantly higher than in hairy roots, 0.158 and 0.047%, respectively. The content of rosavin in callus culture was 0.07%. The content of rosavin and salidroside in callus culture was close to the level of these substances in the rhizomes of R. quadrifida plants growing in vivo, making this culture promising for its possible biotechnological use.     

A Novel Wick-Like Paper-Based Microfluidic Device for 3D Cell Culture and Anti-Cancer Drugs Screening

Paper is increasingly recognized as a portable substrate for cell culture, due to its low-cost, flexible, and special porous property, which provides a native cellular 3D microenvironment. Therefore, paper-based microfluidics has been developed for cell culture and biomedical analysis. However, the inability of continuous medium supply limits the wide application of paper devices for cell culture. Herein, a paper-based microfluidic device is developed with novel folded paper strips as wick-like structure, which is used for medium self-driven perfusion. The paper with patterns of hydrophilic channel, culture areas, and hydrophobic barrier could be easily fabricated through wax-printing. After printing, the hydrophilic paper strip at the periphery of the lower layer is then folded at 90° and extended into the medium container for continuous automatic supply of medium to the cell culture area. Tumor cells cultured in the paper device are tested for anti-cancer drug screening. Visualized cell viability and chemical sensitivity testing can be achieved by colorimetry combined with simple smartphone imaging, effectively reducing precision instrument dependence. The wick paper-based microfluidic device for cell culture endows the method the advantages of lower cost, ease-of-operation, miniaturization, and shows a great potential for large-scale cell culture, antibody drug production, and efficient screening.     

Optimization of an improved,efficient and rapid in vitro micropropagation protocol for Petunia hybrida Vilm. Cv. “Bravo”

An efficient protocol for in-vitro propagation of an important ornamental crop, Petunia hybrida Vilm. Cv. “Bravo” was developed. The explants that were used to carry out the experiment were Leaf segments, nodal segments and shoot tips. Nodal segments recorded highest per cent asepsis followed by shoot tips and leaf segments. Asepsis was found to be highest when the explants were sterilized with Fungicide (Carbendazim) 0.02% for the duration of 30 min followed by 0.1% HgCl₂ for duration of 10 min and then ethanol 70% for 10 s. Longer duration of the sterilant treatment showed more necrotic effects on the explants, thus mercuric chloride treatment when given for 5 min proved to be more effective in terms of survival of the explants. Maximum establishment per cent was recorded in Murashige and Skoog (MS) media fortified with BAP (1.5 mg L⁻¹) and IBA (0.5 mg L⁻¹) in shoot tips and nodal segments, i.e. 97.90 and 95.74% respectively. Callus was efficiently induced and developed when PGR amalgamation of BAP (0.1 mg L⁻¹) and 2,4-D (1.5mg L⁻¹) was used. Kinetin at the concentration of 2.0 mg L⁻¹ along with IBA at 0.5mg L⁻¹ recorded highest callus regeneration in both leaf and internodal segment derived callus. Maximum proliferation percent of shoots (97.90%), highest number of shoots (20.50 explant⁻¹) and maximum length of shoot (2.70 cm) was recorded in PGR combination of IBA and BAP both at 0.5 mg L⁻1 concentration level. Rhizogenesis was recorded to be highest in the MS media containing IBA 1.00 mg L⁻¹. Best hardening media which recorded maximum survival per cent 92.50% was noticed on the media formulation comprised of equal ratio of perlite and vermiculite mix, under poly house conditions.     

春兰ב寒香梅’试管开花诱导及其生理基础

以春兰×寒香梅杂交种(Cymbidium goeringii×Cymbidium ‘Han Xiang Mei’)为材料,MS+琼脂4 g·L-1+蔗糖20 g·L-1+椰汁100 mL·L-1为基础培养基,通过单因素试验,探讨细胞分裂素(TDZ/6-BA)和无机盐浓度(P、K)对其试管花诱导的影响,测定花芽诱导的蛋白质、可溶性总糖含量与超氧化物歧化酶(SOD)活性及激素水平(IAA、ABA)。结果表明,添加0.2 mg·L-1 TDZ和2 mg·L-1 6-BA的花芽诱导率最高,分别为14.33%和14.00%;无机盐浓度3P/3K和3P/5K的培养基花芽诱导率较高,分别达16.67%和11.33%;花芽诱导最佳培养基为MS(3P, 3K)+TDZ 0.2 mg·L-1+椰汁100 mL·L-1+琼脂 4 g·L-1+蔗糖20 g·L-1,花芽诱导率可达34%左右。生理生化指标检测显示,可溶性蛋白、可溶性总糖含量及SOD活性与花芽诱导率呈正相关;稳定的内源激素IAA和ABA含量对花芽诱导有一定的积极作用,含量过高对花芽诱导有抑制作用。     

Green synthesis of ZnO nanoparticles for antimicrobial and vegetative growth applications: A novel approach for advancing efficient high quality health care to human wellbeing

The present work aims to synthesize zinc oxide (ZnO) nanoparticles via green approaches using leaf extract of Parthenium hysterophorus. UV–vis and FT-IR tests confirmed the existence of biomolecules, active materials, and metal oxides. The X-ray diffraction structural study exposes the ZnO nanoparticles formation with hexagonal phase structures. SEM and TEM analysis reveal surface morphologies of ZnO nanoparticles and most of them are spherical with a size range of 10 nm. ZnO nanoparticles were revealed strong antimicrobial activity against both bacterial and fungal strains. The germination of seeds and vegetative growth of Sesamum indicum has been greatly improved.     

叉蕨科30种植物叶表皮形态特征研究

利用光镜对叉蕨科7属30种植物叶表皮形态特征进行详细观察研究。结果显示：（1）叉蕨科30种植物的叶上表皮和下表皮细胞形状均为不规则型,垂周壁式样为深波状或浅波状,具单晶或针晶;上表皮细胞的长宽比为1.62~4.0,下表皮细胞的长宽比为1.63~3.06。（2）在30种植物中共观察到7种气孔器类型,分别为：极细胞型、腋下细胞型、聚合极细胞型、聚腋下细胞型、不等细胞型、无规则四细胞型和不规则型,每种植物分别具有4~7种气孔器类型,均为下生型气孔;气孔长宽比为1.22~1.91,气孔密度为8~76个/mm²,气孔指数为3.9%~25.7%。（3）基于气孔器类型组成进行聚类分析,可将30种植物分成3个类群。（4）对叶表皮形态特征分析认为,轴脉蕨属应介于叉蕨属和肋毛蕨属之间,且与叉蕨属关系更近;叉蕨属的范畴还有待进一步研究;支持将肋毛蕨属从叉蕨科中分离出来置于鳞毛蕨科,但不支持黄腺羽蕨属归入鳞毛蕨科。