Studies on the factors influencing larval settlement in Balanus amphitrite and Mytilus galloprovincialis

Understanding of factors influencing settlement(attachment and metamorphosis) of marine invertebratelarvae is of great importance in aquaculture andcontrol of biofouling. The influence of two factors onsettlement of larvae was assessed from two separateinvestigations: 1, the influence of age (endogenousfactor) on cyprids of the barnacle Balanusamphitrite; and 2, the influence of a microbial film(exogenous factor) on pediveligers of the mussel Mytilus galloprovincialis.The settlement response of cypris larvae of B.amphitrite was found to be age-dependent. Oldercyprids responded more readily to settlement factorsthan newly molted ones. In M.galloprovincialis, competent pediveligers settled inresponse to a microbial filmed surface but not toan unfilmed surface. Moreover, a factor with MW of lessthan 5000 dalton, derived from culture medium of abacterial strain C1.1 (Pseudomonas-Alteromonasgroup), induced the settlement of M. galloprovincialis larvae.Thus, marine invertebrate larvae may require a periodof competence acquisition, during which they arepoorly responsive to settlement inducers. Uponacquisition of competence, larvae readily respondto external cues (e.g. microbial film, bacterialextracellular products).     

Adsorption of Saccharomyces cerevisiae onto cellulose and ECTEOLA-cellulose films for ethanol production

Epichlorohydrin-triethanolamine (ECTEOLA)-cellulose films (paper and cloth) have been found to bind Saccharomyces cerevisiae cells which were able to develop metabolically active colonies on the surface of the films. Unmodified cellulose films also bound the yeast but to a lesser extent. Film fermenters were constructed by coiling a double layer of the cloth and copper screen and vertically placing the resulting cartridge into a column. These film fermenters were able to convert the sugars (14%) in the hydrolysate of a Jerusalem artichoke tuber into ethanol, with 90% of the theoretical yield after 6 h of fermentation. The bound yeast produced ethanol at a specific rate of 1.0 g ethanol per g cell per hour.     

Second-harmonic generation in monolayers of hemicyanine dyes at the air/water interface: Observation of chemical degradation

In situ studies of second-harmonic generation (SHG) in monolayers of pure hemicyanine dyes and their mixtures with arachidic acid at the air/water interface were performed. The studies revealed an unexpected chemical instability of the hemicyanine dyes involving a cleavage of the stilbene double bond when deposited onto the water surface. This reaction occurred especially rapidly in the presence of the arachidic acid. Dilution with arachidic acid did not lead to a significant enhancement of the harmonic intensity.     

Time-correlated flights of juvenile and mature locusts: A comparison between free and tethered animals

The flights of free and tethered Locusta migratoria were followed from initiation with a high-speed film camera. A longer sequence of wing-beat cycles can thus be correlated unequivocally with the animals's movement in time and space. In both flight situations the locusts start with approximately the same instantaneous wing-beat frequency. During the early flight phase free-flying animals increase their wing-beat frequency, whereas for tethered locusts this parameter remains constant or even decreases. The general flight pattern is similar in juvenile and mature locusts; the juveniles however, fly with alower wing-beat frequency and flight speed. The differences in the wing-beat frequencies for both flight performances are discussed with respect to differences in the sensory inputs to the flight motor centre.     

Suppressing Voltage Fading of Li‐Rich Oxide Cathode via Building a Well‐Protected and Partially‐Protonated Surface by Polyacrylic Acid Binder for Cycle‐Stable Li‐Ion Batteries

Li‐rich manganese based oxides (LRMOs) are considered an attractive high‐capacity cathode for advanced Li‐ion batteries; however, their poor cyclability and gradual voltage fading have hindered their practical applications. Herein, an efficient and facile strategy is proposed to stabilize the lattice structure of LRMOs by surface modification of polyacrylic acid (PAA). The PAA‐coated LRMO electrode exhibits only 104 mV of the voltage fading after 100 cycles and 88% capacity retention over 500 cycles. The structural stability is attributed to the carboxyl groups in PAA chains reacting with oxygen species on the surface of LRMO to form a uniform and tightly coated film, which significantly suppresses the dissolution of transition metal elements from the cathode materials into the electrolyte. Importantly, a H⁺/Li⁺ exchange reaction takes place between the LRMO and PAA, generating a proton‐doped surface layer. Density functional theory calculations and experimental evidence demonstrates that the H⁺ ions in the surface lattice efficiently inhibit the migration of transition metal ions, leading to a stabilized lattice structure. This surface modification approach may provide a new route to building a stable Li‐rich oxide cathode with high capacity retention and low voltage fading for practical Li‐ion battery applications.     

Assessment of skin dose in breast cancer radiotherapy: on-phantom measurement and Monte Carlo simulation

AimThe main purpose of the present study is assessment of skin dose in breast cancer radiotherapy.BackgroundAccurate assessment of skin dose in radiotherapy can provide useful information for clinical considerations.Materials and methodsA RANDO phantom was irradiated using a 6 MV Siemens Primus linac with medial and tangential radiotherapy fields for simulating breast cancer treatment. Dosimetry was also performed on various positions across the fields using an EBT3 radiochromic film. Similar conditions of measurement on the RANDO phantom including field size, irradiation angle, number of fields, etc. were subsequently simulated via the Monte Carlo N-Particle Transport code (MCNP). Ultimately, dose values for corresponding points from both methods were compared.ResultsConsidering dosimetry using radiochromic films on the RANDO phantom, there were points having underdose and overdose based on the prescribed dose and skin tolerance levels. In this respect, 81.25% and 18.75% of the points had underdose and overdose, respectively. In some cases, several differences were observed between the measurement and the MCNP simulation results associated with skin dose.ConclusionBased on the results of the points which had underdose, it was suggested that a bolus should be used for the given points. With regard to overdose points, it was advocated to consider skin tolerance dose in treatment planning. Differences between the measurement and the MCNP simulation results might be due to voxel size of tally cells in simulations, effect of beam’s angle of incidence, validation time of linac’s head, lack of electronic equilibrium in the build-up region, as well as MCNP tally type.     

Calibration of MTT assay in proton beams using radiochromic films

PurposeThis study provides methodology of calibrating as well as controlling the output for an MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) colorimetric assay irradiated in a low energy proton beam using EBT3-model GAFCHROMIC^TM film, without correcting for quenching effect.MethodsA calibrated Markus ionization chamber was used to measure the depth dose and beam output for 26.5 MeV protons produced by a CS30 cyclotron. A time-controlled aluminum cylinder was added in front of the horizontal beam-exit serving as a radiation shutter. Following the TRS-398 reference dosimetry protocol for proton beams, the output was calibrated in water at a reference depth of 3 mm. EBT3 film was calibrated for doses up to 8 Gy at the same depth. To verify the dose distribution for each 96-well MTT assay plate, EBT3 film was placed at the reference depth during irradiation and cell doses were scaled by measured percent depth dose (PDD) data.ResultsThe radiochromic film dosimetry system in this study provides dose measurements with an uncertainty better than 3.3% for doses higher than 1 Gy. From a single exposure and utilizing the Gaussian shape of the beam, multiple dose points can be obtained within different wells of the same plate ranging from 6.9 Gy (sigma ∼4%) in the central well, and 2 Gy (sigma ∼8%) for wells positioned closer to the periphery.ConclusionsWe described a methodology for radiochromic film-based dose monitoring system, using low-energy protons, which can be used for the MTT assay in any proton beam, except within Bragg peak region.     

大兴安岭泥炭地不同菌根类型木本植物叶片凋落物分解及其温度敏感性差异

以我国大兴安岭多年冻土区泥炭地常见的3种外生菌根木本植物(细叶沼柳Salix rosmarinifolia、白桦Betula platyphylla和柴桦B.fruticosa)和4种欧石楠菌根木本植物(笃斯越桔Vaccinium uliginosum、狭叶杜香Ledum palustre、甸杜Chamaedaphne calyculata和小叶杜鹃Rhododendron parrifolum)为研究对象,通过315天培养试验测定10和20℃叶片凋落物分解过程中的碳(C)累积矿化量和重量损失,并分析其温度敏感性。结果表明:外生菌根植物叶片凋落物的C矿化量和重量损失在10和20℃均高于欧石楠菌根植物;外生菌根植物凋落物分解过程中C矿化量的温度敏感性系数高于欧石楠菌根植物,但重量损失的温度敏感性系数低于欧石楠菌根植物;在每一培养温度下,C矿化量和重量损失均与凋落物全氮(N)和全磷(P)浓度呈正相关,与C/N和C/P呈负相关;尽管C矿化量的温度敏感性系数与凋落物初始化学组成无显著相关性,但重量损失的温度敏感性系数与凋落物全N和全P浓度呈负相关,与C/N和C/P呈正相关。本研究结果为认识和预测气候变暖及其引起的物种组成变化对北方泥炭地植物凋落物分解的影响提供理论依据。     

Immobilization of Candida cylindracea lipase on poly lactic acid,polyvinyl alcohol and chitosan based ternary blend film: Characterization,activity, stability and its application for N-acylation reactions

The ecofriendly ternary blend polymer film was prepared from the chitosan (CH), polylactic acid (PLA) and polyvinyl alcohol (PVA). Immobilization of Candida cylindracea lipase (CCL) was carried out on ternary blend polymer via entrapment methodology. The ternary blend polymer and immobilized biocatalyst were characterized by using N₂ adsorption–desorption isotherm, SEM, FTIR, DSC, and (%) water content analysis through Karl Fischer technique. Biocatalyst was then subjected for the determination of practical immobilization yield, protein loading and specific activity. Immobilized biocatalyst was further applied for the determination of biocatalytic activity for N-acylation reactions. Various reaction parameters were studied such as effect of immobilization support (ratio of PLA:PVA:CH), molar ratio (dibutylamine:vinyl acetate), solvent, biocatalyst loading, time, temperature, and orbital speed rotation. The developed protocol was then applied for the N-acylation reactions to synthesize several industrially important acetamides with excellent yields. Interestingly, immobilized lipase showed fivefold higher catalytic activity and better thermal stability than the crude extract lipase CCL. Furthermore various kinetic and thermodynamic parameters were studied and the biocatalyst was efficiently recycled for four successive reuses. It is noteworthy to mention that immobilized biocatalyst was stable for period of 300 days.     

Fabrication of Nano-engineered Transparent Conducting Oxides by Pulsed Laser Deposition

Nanosecond Pulsed Laser Deposition (PLD) in the presence of a background gas allows the deposition of metal oxides with tunable morphology, structure, density and stoichiometry by a proper control of the plasma plume expansion dynamics. Such versatility can be exploited to produce nanostructured films from compact and dense to nanoporous characterized by a hierarchical assembly of nano-sized clusters. In particular we describe the detailed methodology to fabricate two types of Al-doped ZnO (AZO) films as transparent electrodes in photovoltaic devices: 1) at low O₂ pressure, compact films with electrical conductivity and optical transparency close to the state of the art transparent conducting oxides (TCO) can be deposited at room temperature, to be compatible with thermally sensitive materials such as polymers used in organic photovoltaics (OPVs); 2) highly light scattering hierarchical structures resembling a forest of nano-trees are produced at higher pressures. Such structures show high Haze factor (>80%) and may be exploited to enhance the light trapping capability. The method here described for AZO films can be applied to other metal oxides relevant for technological applications such as TiO₂, Al₂O₃, WO₃ and Ag₄O₄.