Observations on the behavior of vitreous ice at approximately 82 and approximately 12 K

In an attempt to determine why cooling with liquid helium actually proved disadvantageous in our electron cryotomography experiments, further tests were performed to explore the differences in vitreous ice at approximately 82 and approximately 12 K. Electron diffraction patterns showed clearly that the vitreous ice of interest in biological electron cryomicroscopy (i.e., plunge-frozen, buffered protein solutions) does indeed collapse into a higher density phase when irradiated with as few as 2-3 e-/A2 at approximately 12 K. The high density phase spontaneously expanded back to a state resembling the original, low density phase over a period of hours at approximately 82 K. Movements of gold fiducials and changes in the lengths of tunnels drilled through the ice confirmed these phase changes, and also revealed gross changes in the concavity of the ice layer spanning circular holes in the carbon support. Brief warmup-cooldown cycles from approximately 12 to approximately 82 K and back, as would be required by the flip-flop cryorotation stage, did not induce a global phase change, but did allow certain local strains to relax. Several observations including the rates of tunnel collapse and the production of beam footprints suggested that the high density phase flows more readily in response to irradiation. Finally, the patterns of bubbling were different at the two temperatures. It is concluded that the collapse of vitreous ice at approximately 12 K around macromolecules is too rapid to account alone for the problematic loss of contrast seen, which must instead be due to secondary effects such as changes in the mobility of radiolytic fragments and water.     

Searching for a needle in the haystack: comparing six methods to evaluate heteroplasmy in difficult sequence context

Mitochondrial DNA (mtDNA) mutations have been involved in disease, aging and cancer and furthermore exploited for evolutionary and forensic investigation. When investigating mtDNA mutations the peculiar aspects of mitochondrial genetics, such as heteroplasmy and threshold effect, require suitable approaches which must be sensitive enough to detect low-level heteroplasmy and, precise enough to quantify the exact mutational load. In order to establish the optimal approach for the evaluation of heteroplasmy, six methods were experimentally compared for their capacity to reveal and quantify mtDNA variants. Drawbacks and advantages of cloning, Fluorescent PCR (F-PCR), denaturing High Performance Liquid Chromatography (dHPLC), quantitative Real-Time PCR (qRTPCR), High Resolution Melting (HRM) and 454 pyrosequencing were determined. In particular, detection and quantification of a mutation in a difficult sequence context were investigated, through analysis of an insertion in a homopolymeric stretch (m.3571insC).     

Successful preservation of capercaillie (Tetrao urogallus L.) semen in liquid and frozen states

Experiments on semen collection and preservation were undertaken by Wroc?aw University of Environmental and Life Sciences and Forestry Wis?a, Poland to assist in the protection of the capercaillie (Tetrao urogallus L.) and to create an ex situ in vitro cryobank. Semen was collected from 11 captive-bred males, using dorsoabdominal massage. Ejaculates once obtained were diluted 3-fold at room temperature with EK diluent and then a number of them were stored at 4 °C for 18, 24, and 48 hours, while the remaining ejaculates were equilibrated with 6% dimethylacetamide and frozen by pipetting, drop-by-drop directly onto a liquid nitrogen surface. Frozen pellets were thawed at 60 °C in a water bath after 4 to 28 mo of storage. In total, 103 individually collected ejaculates (54 stored as liquid and 49 frozen in liquid nitrogen) were of appropriate value for further processing. The volume of ejaculates varied from 30 to 240 μL; spermatozoa concentration from 70 × 10⁶ mL⁻¹ to 1950 × 10⁶ mL⁻¹. The total amount of live spermatozoa in the fresh semen varied from 85.3% to 99.0%, of which from 41.1% to 85.3% were morphologically normal. Among morphologically abnormal forms, bulb-head (5.6% to 36.0%) and midpiece deformations (1.3% to 16.6%) were the most frequent. Dilution and semen storage up to 24 h at 4 °C did not affect the semen quality, as far as motility and sperm morphology are concerned. A significant (P < 0.05) decrease in total live (94.9 vs. 91.7%) and live normal cells (66.4 vs. 56.7%) was observed after 48 h. About 30% to 40% of spermatozoa remained motile. Cryopreservation significantly decreased (P < 0.05) the total number of live and live normal spermatozoa however, in relation to the fresh semen, their average content was 44.1% and 37.4%, respectively. Significant (P < 0.05) individual differences were observed in the quality of the fresh, liquid stored and the frozen-thawed semen assessed in terms of spermatozoa motility and morphology. After a single insemination with thawed semen containing 9.7 million live normal cells, 80% fertility and 100% hatchability were achieved. The obtained results indicate for the first time that there is the potential to use liquid stored and cryopreserved capercaillie semen to support conservation measures for the maintenance of genetic diversity, as well as to increase the number of reintroduced progeny of this endangered grouse species.     

The use of biophysical proteomic techniques in advancing our understanding of diseases

The use of proteomic approaches in investigating diseases is continuing to expand and has started to provide answers to substantial gaps in our understanding of disease pathogenesis as well as in the development of effective strategies for the early diagnosis and treatment of diseases. Biophysical techniques form a crucial part of the advanced proteomic techniques currently used and include mass spectrometry and protein separation techniques, such as two-dimensional gel electrophoresis and liquid chromatography. The application of biophysical proteomic techniques in the study of disease includes delineation of altered protein expression, not only at the whole-cell or tissue levels, but also in subcellular structures, protein complexes, and biological fluids. These techniques are also being used for the discovery of novel disease biomarkers, exploration of the pathogenesis of diseases, development of new diagnostic methodologies, and identification of new targets for therapeutics. Proteomic techniques also have the potential for accelerating drug development through more effective strategies for evaluating a specific drug’s therapeutic effects and toxicity. This article discusses the application of biophysical proteomic techniques in delineating cardiovascular disease and other diseases, as well as the limitations and future research directions required for these techniques to gain greater acceptance and have a larger impact.     

Internal calibrants allow high accuracy peptide matching between MALDI imaging MS and LC-MS/MS

One of the important challenges for MALDI imaging mass spectrometry (MALDI-IMS) is the unambiguous identification of measured analytes. One way to do this is to match tryptic peptide MALDI-IMS m/z values with LC-MS/MS identified m/z values. Matching using current MALDI-TOF/TOF MS instruments is difficult due to the variability of in situ time-of-flight (TOF) m/z measurements. This variability is currently addressed using external calibration, which limits achievable mass accuracy for MALDI-IMS and makes it difficult to match these data to downstream LC-MS/MS results. To overcome this challenge, the work presented here details a method for internally calibrating data sets generated from tryptic peptide MALDI-IMS on formalin-fixed paraffin-embedded sections of ovarian cancer. By calibrating all spectra to internal peak features the m/z error for matches made between MALDI-IMS m/z values and LC-MS/MS identified peptide m/z values was significantly reduced. This improvement was confirmed by follow up matching of LC-MS/MS spectra to in situ MS/MS spectra from the same m/z peak features. The sum of the data presented here indicates that internal calibrants should be a standard component of tryptic peptide MALDI-IMS experiments.     

Do-It-Yourself device for recovery of cryopreserved samples accidentally dropped into cryogenic storage tanks

Liquid nitrogen is colorless, odorless, extremely cold (-196 °C) liquid kept under pressure. It is commonly used as a cryogenic fluid for long term storage of biological materials such as blood, cells and tissues (1,2). The cryogenic nature of liquid nitrogen, while ideal for sample preservation, can cause rapid freezing of live tissues on contact - known as 'cryogenic burn' (2), which may lead to severe frostbite in persons closely involved in storage and retrieval of samples from Dewars. Additionally, as liquid nitrogen evaporates it reduces the oxygen concentration in the air and might cause asphyxia, especially in confined spaces (2). In laboratories, biological samples are often stored in cryovials or cryoboxes stacked in stainless steel racks within the Dewar tanks (1). These storage racks are provided with a long shaft to prevent boxes from slipping out from the racks and into the bottom of Dewars during routine handling. All too often, however, boxes or vials with precious samples slip out and sink to the bottom of liquid nitrogen filled tank. In such cases, samples could be tediously retrieved after transferring the liquid nitrogen into a spare container or discarding it. The boxes and vials can then be relatively safely recovered from emptied Dewar. However, the cryogenic nature of liquid nitrogen and its expansion rate makes sunken sample retrieval hazardous. It is commonly recommended by Safety Offices that sample retrieval be never carried out by a single person. Another alternative is to use commercially available cool grabbers or tongs to pull out the vials (3). However, limited visibility within the dark liquid filled Dewars poses a major limitation in their use. In this article, we describe the construction of a Cryotolerant DIY retrieval device, which makes sample retrieval from Dewar containing cryogenic fluids both safe and easy.     

A simple and inexpensive on-column frit fabrication method for fused-silica capillaries for increased capacity and versatility in LC-MS/MS applications

A modified sol-gel method for a one-step on-column frit preparation for fused-silica capillaries and its utility for peptide separation in LC-MS/MS is described. This method is inexpensive, reproducible, and does not require specialized equipments. Because the frit fabrication process does not damage polyimide coating, the frit-fabricated column can be tightly connected on-line for high pressure LC. These columns can replace any capillary liquid transfer tubing without any specialized connections up-stream of a spray tip column. Therefore multiple columns with different phases can be connected in series for one- or multiple-dimensional chromatography.     

Property control of sophorolipids: influence of fatty acid substrate and blending

Sophorolipids (SLs) were synthesized by fed-batch fermentation of Candida bombicola on glucose and either palmitic acid (SL-p), stearic acid (SL-s), oleic acid (SL-o) or linoleic acid (SL-l) and the structural distribution accurately determined by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS). The surfactant properties, including critical micelle concentration (CMC), minimum surface tension (min.ST) and oil-water interfacial tension (IFT) were measured by tensiometry. Minimum STs of 35–36 mN/m were obtained regardless of the substrate while IFTs ranged from 3–5 mN/m with the exception of SL-l, which had an IFT of 7 mN/m. The largest disparity occurred in the CMC values, which ranged from 35 ppm for SL-s to 250 ppm for SL-l. By manually mixing these four SLs in different ratios, it was possible to better control the CMC values without affecting the min.ST or IFT, which will prove beneficial as new applications for SLs are established. Mention of trade names or commercial products in this publication is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Pectenotoxin and okadaic acid-based toxin profiles in Dinophysis acuta and Dinophysis acuminata from New Zealand

The major pectenotoxin and okadaic acid group toxins in Dinophysis acuta and Dinophysis acuminata cell concentrates, collected from various locations around the coast of the South Island of New Zealand (NZ), were determined by liquid chromatography–tandem mass spectrometry (LC–MS/MS). PTX2 and PTX11 were the major polyether toxins in all Dinophysis spp. cell concentrates. D. acuta contained PTX11 and PTX2 at concentrations of 4.7–64.6 and 32.5–107.5 pg per cell, respectively. The amounts of PTX11 and PTX2 in D. acuminata were much lower at 0.4–2.1 and 2.4–25.8 pg per cell, respectively. PTX seco acids comprised only 4% of the total PTX content of both D. acuta and D. acuminata. D. acuta contained low levels of OA (0.8–2.7 pg per cell) but specimens from the South Island west coast also contained up to 10 times higher levels of OA esters (7.0–10.2 pg per cell). Esterified forms of OA were not observed in D. acuta specimens from the Marlborough Sounds. D. acuta did not contain any DTX1 though all D. acuminata specimens contained DTX1 at levels of 0.1–2.4 pg per cell. DTX2 was not present in any New Zealand Dinophysis spp. specimens. Although the total toxin content varied spatially and temporally, the relative proportions of the various toxins in different specimens from the same location appeared to be relatively stable. The total PTX/total OA ratios in different isolates of D. acuta were very similar (mean±S.E.: 14.9±1.9), although the Marlborough Sounds D. acuminata isolates had a higher total PTX/total OA ratio (mean±S.E.: 22.7±2.4) than the Akaroa Harbour isolates (8.0). No evidence of azaspiracids were detected in these specimens. These results show that the LC–MS/MS monitoring of plankton for PTX group toxins (e.g. PTX2) and their derivatives (e.g. PTX2 seco acid) may provide a sensitive, semi-quantitative, indicator of the presence of more cryptic OA group toxins (e.g. OA esters).     

Structural determinants for partitioning of lipids and proteins between coexisting fluid phases in giant plasma membrane vesicles

The structural basis for organizational heterogeneity of lipids and proteins underlies fundamental questions about the plasma membrane of eukaryotic cells. A current hypothesis is the participation of liquid ordered (Lo) membrane domains (lipid rafts) in dynamic compartmentalization of membrane function, but it has been difficult to demonstrate the existence of these domains in live cells. Recently, giant plasma membrane vesicles (GPMVs) obtained by chemically induced blebbing of cultured cells were found to phase separate into optically resolvable, coexisting fluid domains containing Lo-like and liquid disordered (Ld)-like phases as identified by fluorescent probes. In the present study, we used these GPMVs to investigate the structural bases for partitioning of selected lipids and proteins between coexisting Lo-like/Ld-like fluid phases in compositionally complex membranes. Our results with lipid probes show that the structure of the polar headgroups, in addition to acyl chain saturation, can significantly affect partitioning. We find that the membrane anchor of proteins and the aggregation state of proteins both significantly influence their distributions between coexisting fluid phases in these biological membranes. Our results demonstrate the value of GPMVs for characterizing the phase preference of proteins and lipid probes in the absence of detergents and other perturbations of membrane structure.