The cysteine 34 residue of A1M/α1-microglobulin is essential for protection of irradiated cell cultures and reduction of carbonyl groups

Abstract

α₁-microglobulin (A1M) is a 26 kDa plasma and a tissue protein belonging to the lipocalin family. The reductase and free radical scavenger A1M has been shown to protect cells and extracellular matrix against oxidative and irradiation-induced damage. The reductase activity was previously shown to depend upon an unpaired cysteinyl side-chain, C34, and three lysyl side-chains, K92, 118, and 130, located around the open end of the lipocalin pocket. The aim of this work was to investigate whether the cell and matrix protection by A1M is a result of its reductase activity by using A1M-variants with site-directed mutations of the C34, K92, K118, and K130 positions. The results show that the C34 side-chain is an absolute requirement for protection of HepG2 cell cultures against alpha-particle irradiation-induced cell death, upregulation of stress response and cell cycle regulation genes. Mutation of C34 also resulted in loss of the reduction capacity toward heme- and hydrogen peroxide-oxidized collagen, and the radical species 2,2´-azino-bis (3-ethyl-benzo-thiazoline-6-sulphonic acid) (ABTS). Furthermore, mutation of C34 significantly suppressed the cell-uptake of A1M. The K92, K118, and K130 side-chains were of minor importance in cell protection and reduction of oxidized collagen but strongly influenced the reduction of the ABTS-radical. It is concluded that antioxidative protection of cells and collagen by A1M is totally dependent on its C34 amino acid residue. A model of the cell protection mechanism of A1M should be based on the redox activity of the free thiolyl group of the C34 side-chain and a regulatory role of the K92, K118, and K130 residues.     

Surfactant phospholipid metabolism

Pulmonary surfactant is essential for life and is composed of a complex lipoprotein-like mixture that lines the inner surface of the lung to prevent alveolar collapse at the end of expiration. The molecular composition of surfactant depends on highly integrated and regulated processes involving its biosynthesis, remodeling, degradation, and intracellular trafficking. Despite its multicomponent composition, the study of surfactant phospholipid metabolism has focused on two predominant components, disaturated phosphatidylcholine that confers surface-tension lowering activities, and phosphatidylglycerol, recently implicated in innate immune defense. Future studies providing a better understanding of the molecular control and physiological relevance of minor surfactant lipid components are needed. This article is part of a Special Issue entitled Phospholipids and Phospholipid Metabolism.     

Development and set-up of a portable device to monitor airway exhalation and deposition of particulate matter

The aim of this study was to assess and monitor airway exhalation and deposition of particulate matter (PM). After standardizing inspiratory/expiratory flow and volumes, a novel device was tested on a group of 20 volunteers and in a field study on workers exposed to cristobalite. Both male and female subjects showed a higher percentage of deposition in the 0.5?μm channel than in the 0.3?μm channel on a laser particle counter, but it was higher in the males because of their higher exhaled lung volumes. The device was tested on a wider range of particles (0.3–0.5–1.0–2.5?μm) in the cristobalite productive division. The device has low intrasubject variability and good reproducibility, with geometric mean of %CV?相似文献   

Aquaporin Trafficking in Plant Cells: An Emerging Membrane‐Protein Model

Aquaporins (AQPs) are channel proteins that facilitate the transport of water and small solutes across biological membranes. In plants, AQPs exhibit a high multiplicity of isoforms in relation to a high diversity of sub‐cellular localizations, at the plasma membrane (PM) and in various intracellular compartments. Some members also exhibit a dual localization in distinct cell compartments, whereas others show polarized or domain‐specific expression at the PM or tonoplast, respectively. A diversity of mechanisms controlling the routing of newly synthesized AQPs towards their destination membranes and involving diacidic motifs, phosphorylation or tetramer assembly is being uncovered. Recent approaches using single particle tracking, fluorescence correlation spectroscopy and fluorescence recovery after photobleaching have, in combination with pharmacological interference, stressed the peculiarities of AQP sub‐cellular dynamics in environmentally challenging conditions. A role for clathrin and sterol‐rich domains in cell surface dynamics and endocytosis of PM AQPs was uncovered. These recent advances provide deep insights into the cellular mechanisms of water transport regulation in plants. They also point to AQPs as an emerging model for studying the sub‐cellular dynamics of plant membrane proteins .     

Immunogenicity of different stressed IgG monoclonal antibody formulations in immune tolerant transgenic mice

The presence of protein aggregates in biopharmaceutical formulations is of great concern for safety and efficacy reasons. The aim of this study was to correlate the type and amount of IgG monoclonal antibody aggregates with their immunogenic potential. IgG degradation was obtained by freeze-thawing cycles, pH-shift cycles, heating, shaking and metal-catalyzed oxidation. The size, amount, morphology and type of intermolecular bonds of aggregates, as well as structural changes and epitope integrity were characterized. These formulations were injected in mice transgenic (TG) for human genes for Ig heavy and light chains and their non-transgenic (NTG) counterparts. Anti-drug antibody (ADA) titers were determined by bridging ELISA. Both unstressed IgG and freeze-thawed formulation did not induce measurable ADA levels. A mild antibody response was obtained in a fairly small percentage of mice, when injected with shaken, pH-shifted and heated formulations. The metal-catalyzed oxidized IgG formulation was the most immunogenic one, in both ADA titers and number of responders. The overall titers of NTG responders were significantly higher than the ones produced by TG mice, whereas there was no significant difference between the overall number of TG and NTG responders. This study reinforces the important role of protein aggregates on immunogenicity of therapeutic proteins and provides new insight into the immunogenic potential of different types of IgG aggregates. The results indicate that the quality of the IgG aggregates has more impact on the development of an immune response than their quantity or size.     

Fabrication,Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics

Surface acoustic waves (SAWs) can be used to drive liquids in portable microfluidic chips via the acoustic counterflow phenomenon. In this video we present the fabrication protocol for a multilayered SAW acoustic counterflow device. The device is fabricated starting from a lithium niobate (LN) substrate onto which two interdigital transducers (IDTs) and appropriate markers are patterned. A polydimethylsiloxane (PDMS) channel cast on an SU8 master mold is finally bonded on the patterned substrate. Following the fabrication procedure, we show the techniques that allow the characterization and operation of the acoustic counterflow device in order to pump fluids through the PDMS channel grid. We finally present the procedure to visualize liquid flow in the channels. The protocol is used to show on-chip fluid pumping under different flow regimes such as laminar flow and more complicated dynamics characterized by vortices and particle accumulation domains.     

Specific and high-resolution identification of monoclonal antibody fragments detected by capillary electrophoresis–sodium dodecyl sulfate using reversed-phase HPLC with top-down mass spectrometry analysis

ABSTRACT

In recent years, capillary electrophoresis–sodium dodecyl sulfate (cSDS) has been widely used for high resolution separation and quantification of the fragments and aggregates of monoclonal antibodies (mAbs) to ensure the quality of mAb therapeutics. However, identification of the low-molecular-weight (LMW) and high-molecular-weight (HMW) species detected in cSDS electropherograms has been based primarily on the approximate MWs calculated from standard curves using known MW standards and correlations with fragments and aggregates identified by other methods. It is not easy to collect sufficient amounts of H/LMW species from cSDS for analysis by orthogonal methods and the direct coupling of cSDS with mass spectrometry (MS) is very difficult due to interference from SDS. In this study, we describe the precise identification of H/LMW species detected by cSDS using reversed-phase high performance liquid chromatography (RP-HPLC) coupled with top-down tandem MS analysis. The H/LMW species were first identified by on-line RP-HPLC MS analysis and the RP-HPLC fractions were then analyzed by cSDS to connect the identified H/LMW species with the peaks in the cSDS electropherogram. With this method, 58 unique H/LMW species were identified from an immunoglobulin G1 (IgG1) mAb. The identified fragments ranged from 10 kDa single chain fragments to 130 kDa triple chain fragments, including some with post-translational modifications. This is the first study to clearly identify the antibody fragments, including the exact clipping sites, observed in cSDS electropherograms. The methodology and results presented here should be applicable to most other IgG1 mAbs.     

Dissipative particle dynamics simulation of the soft micro actuator using polymer chain displacement in electro-osmotic flow

ABSTRACT

In this research, the numerical simulation of a soft polymer micro actuator performance has been investigated using the dissipative particle dynamics method in electro-osmotic flow. Effective factors including electro-osmotic flow and polymer chain parameters have been studied. First of all, considering a wide range of electro-osmotic parameters, the validation of analytical results is carried out in a simple micro channel. The electric field and zeta potential changes are linearly related to the flow rate, and the kh parameter behaves nonlinearly to around the kh?=?10. In the following, a convergent–divergent channel is used for the soft micro actuator simulation in which a polymer chain as a heart of actuation is embedded in the middle. As the main control parameter, the direction of the electric field is changed every 4?s, and it leads to a reciprocating motion. The numerical results indicate that the displacement of the soft polymer chain will be increased by enhancing the electric field, the number of beads, decreasing the harmonic bond coefficient and also exposing more length of a polymer chain in front of fluid flow. The results of this study may be useful for some future applications such as artificial fibres and muscles.     

On the Application of Widom's Test Particle Method to Homogeneous and Inhomogeneous Fluids

Abstract

Chemical potentials of a homogeneous and an inhomogeneous Lennard-Jones fluid have been determined by molecular dynamics simulations on the vector computer CYBER 205 by applying essentially the fictitious test particle method of Widom. For the homogeneous fluid we find, contrary to the previous result of Guillot and Guissani, that the simulated chemical potential is independent of the particle number. The crucial point, however, is a sufficiently large cut-off radius in the evaluation of the Boltzmann factor. Comparing with our WCA-type perturbation theory, we get agreement in the chemical potentials within 0.1 kT up to the density n[sgrave]³ = 0.80 and a difference of 0.2 kT at n[sgrave]³ = 0.85. For the inhomogeneous case we consider a fluid in a cylindrical pore and integrate Widom's equation over a certain probe volume as suggested earlier by us. Chemical potentials are then calculated independently in five different probe volumes, which are cylindrical shells. The results agree well from the second to the fourth shell. Inaccuracies in the innermost cylinder can be easily explained by bad statistics. In the shell close to the wall the extremely high local density is responsible for the inaccuracies. Extending the probe volume over all cylindrical shells besides the one closest to the wall is thought to yield rather reliable results for the chemical potential. As a by-product of the simulations we also obtained diffusion coefficients, which are given in an appendix.     

Dissipative particle dynamics of non-spherical particles using a Gaussian density model

The Gaussian density molecular model has been adapted for dissipative particle dynamics. The model, when combined with a soft potential, is shown to be a very flexible mesoscale model exhibiting a wide range of phase behaviour. The soft potential allows relatively large time steps to be used and hence a more rapid equilibration. In addition, the model can be used to study both uniaxial and biaxial systems. We have undertaken a number of pilot studies and have demonstrated that the Gaussian model is able to identify nematic–isotropic phase transitions in liquid crystals and the formation of ordered discotic phases.